Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

multipath-tools-0.8.2+140.5146cae-lp152.3.3.1 RPM for aarch64

From OpenSuSE Ports Leap 15.2 updates for aarch64

Name: multipath-tools Distribution: openSUSE Leap 15.2
Version: 0.8.2+140.5146cae Vendor: openSUSE
Release: lp152.3.3.1 Build date: Mon Oct 12 23:14:37 2020
Group: System/Base Build host: obs-arm-2
Size: 2500871 Source RPM: multipath-tools-0.8.2+140.5146cae-lp152.3.3.1.src.rpm
Summary: Tools to Manage Multipathed Devices with the device-mapper
This package provides the multipath tool and the multipathd daemon
to manage dm-multipath devices. multipath can detect and set up
multipath maps. multipathd sets up multipath maps automatically,
monitors path devices for failure, removal, or addition, and applies
the necessary changes to the multipath maps to ensure continuous
availability of the map devices.




GPL-2.0-only AND LGPL-2.0-or-later


* Thu Sep 17 2020
  - Update to version 0.8.2+140.5146cae
    * drop nr_active field, always count active paths (bsc#1125043)
    * kpartx.rules: fix handling of synthetic uevents (bsc#1161923)
    * libmpathpersist: limit PRIN allocation length to 8192 bytes
    * avoid data corruption caused by duplicate alias in bindings file
    * improve logging for failure to set dev_loss_tmo (bsc#1173060, bsc#1173064)
    * Fix handling of hardware properties for maps without paths
  - Backported upstream fixes (bsc#1176670):
    * multipath: add "-e" option to enable foreign libraries (bsc#1139837)
    * multipath-tools: add HPE MSA 1060/2060 to hwtable
    * ALUA support for PURE FlashArray
    * libmultipath: EMC PowerMax NVMe device config
    * libmultipath: pathinfo(): don't filter emtpy devnode names
    * libmultipath: fix ALUA autodetection when paths are down
    * libmultipath: fix (max_)polling_interval setting logic
    * libmultipath: count pending paths as active on loads
    * multipathd: disable queueing for recreated map in uev_remove_map
    * multipathd: fix check_path errors with removed map
    * multipathd: add new paths under vecs lock
    * multipath: deal with delegation failures correctly
    * Added memory leak testing and fixed various leaks
    * Various minor fixes, code correctness improvements
  - Dropped upstream merged patch:
    * Drop patch: libmultipath-set-enable_foreign-to-NONE-by-default.patch
  - Added README.alua
  - Added %check section in spec file
  - Modernized BuildRequires
* Wed Jul 01 2020
  - Update to version 0.8.2+23.4b86d66:
  - Fix handling of incompletely initialized udev devices (bsc#1172157)
  - Remove ineffective patch for bsc#1172157
    * Del patch: 11-dm-mpath.rules-Fix-udev-rule-processing-during-co.patch
* Mon Jun 08 2020 Martin Wilck <>
  - Remove 0%{?is_opensuse} from spec file (jsc#SLE-11854)
  - Fix udev rule processing during coldplug (bsc#1172157)
    * Add patch: 11-dm-mpath.rules-Fix-udev-rule-processing-during-co.patch
* Fri Sep 06 2019
  - Update to version 0.8.2+18.9ff73e7:
    * Fix premature path reinstantiation with san_path_err_XX
* Thu Aug 29 2019
  - Update to version 0.8.2+17+suse.21ac578:
    * kpartx: recognize DASD on loop devices again (bsc#1139775)
    * Pull in SLE15-SP1 patches yet missing upstream
  - Update to upstream version 0.8.2 (bsc#1148767)
    * libmultipath: more cautious blacklisting by missing property
      (don't blacklist paths because of temporarily missing
      udev properties)
    * code correctness fixes from coverity and gcc9 warnings
    * fixes for VPD80/83 parsing
  - Update to upstream version 0.8.1 (bsc#1148767)
    * Improve handling of changed WWIDs and temporary failure
    to obtain WWID. Option "disable_changed_wwids" is now ignored.
    * Fixes for PATH_PENDING state handling (bsc#1125043)
    * libmutipath: continue to use old state on PATH_PENDING
    * libmultipath: disable user_friendly_names for NetApp
    * various fixes for marginal path code
  - Update to upstream version 0.8.0 (bsc#1148767)
    * multipathd: fix pp->initialized state ping-ponging
    * multipath: blacklist zram devices
* Wed Aug 21 2019 Martin Wilck <>
  - Set default for "enable_foreign" to "NONE" (bsc#1139837)
    * added libmultipath-set-enable_foreign-to-NONE-by-default.patch
* Thu Aug 15 2019
  - Update to version 0.7.9+166+suse.1693c88:
    * multipath.conf.5: document foreign library support
    * multipath.conf: add "enable_foreign" parameter (bsc#1139837)
* Tue Jul 02 2019
  - Update to version 0.7.9+164+suse.e41fbd9:
    * libmultipath: trigger uevents for partitions, too (bsc#1140146)
* Tue Jul 02 2019 Martin Wilck <>
  - Spec file: backported some modernizations from Factory
    * Remove unused /var/cache/multipath directory
    * Remove check for multipath maps in %pre and %post
    * Remove SLE11-specific multipathd service stop / start from
      %pre / %post
    * Remove obsolete tools from package description (bsc#1129827)
    * Add -n to %service_del_{pre,post}un for multipathd.socket
* Tue Jun 25 2019
  - Update to version 0.7.9+163+suse.7993fed:
    * mpathpersist: optimize for setups with many LUNs (bsc#1134648)
    * mpathpersist: add option -f/--batch-file (bsc#1134648)
    * libmultipath: get_prio(): really don't reset prio for
      inaccessible paths (bsc#1118495)
  - Upstream bug fixes from dm-devel (bsc#1139369):
    * multipath: call store_pathinfo with DI_BLACKLIST
    * multipathd: fix REALLOC_REPLY with max length reply
    * libmultipath: make vector_foreach_slot_backwards work as expected
    * multipathd: fix client response for socket activation (bsc#1133861)
  - hwtable: add Lenovo DE series (bsc#1125507)
* Thu May 02 2019
  - Update to version 0.7.9+148+suse.5179c8d:
    * fix compilation of external programs with -lmultipath
* Tue Apr 30 2019
  - Update to version 0.7.9+147+suse.689dcaf:
    * Avoid deadlock situation during udev settle
    (bsc#1131789, bsc#1125145)
    - multipath -u: test socket connection in non-blocking mode
    * Avoid device IO in "multipath -u" (bsc#1125145)
    * Fix priority handling for offline paths
    * Fix daemon shutdown issues (bsc#1110060, bsc#1110439)
    - multipathd: protect all access to running_state
    - multipathd: allow shutdown during configure()
* Thu Mar 14 2019 Martin Wilck <>
  - Disable kmod()-style dependencies for now (bsc#1119414)
* Thu Mar 07 2019 Martin Wilck <>
  - Fix module name in multipath.conf (bsc#1119414)
    * The modules-load.d entry must match the filename exactly
* Tue Mar 05 2019 Martin Wilck <>
  - Add kmod(xyz) style dependencies for SLE15-SP1
    (jsc#SLE-3853, fate#326579, bsc#1119414)
* Tue Mar 05 2019
  - Update to version 0.7.9+128+suse.ae29865:
  - Bug fixes:
    * multipathd: Fix miscounting active paths (bsc#1125043)
    * multipathd: avoid null pointer dereference in LOG_MSG
    * minor fixes suggested by coverity (bsc#1127879)
* Fri Jan 11 2019 Martin Wilck <>
  - Add BuildRequires on suse-module-tools
    * we need it for regenerate_initrd_posttrans
* Wed Jan 09 2019
  - Update to version 0.7.9+111+suse.b4232b7:
  - merged upstream cb4a979a (SUSE bug fixes merged upstream,
    code-identical to previous release).
* Tue Jan 08 2019
  - Update to version 0.7.9+109+suse.203c1cf:
    * multipathd: avoid crash in cli_list_path (bsc#1121134)
    * libmultipath: fix compilation with older kernel headers
  - merged upstream fb824725
    * Improved NVMe support in both native and dm-mpath mode
    added basic NVMe ANA support (bsc#1119898, bsc#1118495)
    * Fix prio output in "multipathd show topology" (bsc#1119897)
    * multipathd: fix daemon not really shutdown
    (bsc##1110060, bsc#1110439)
    * setup_map: wait for pending path checkers to finish
* Fri Dec 14 2018
  - Update to version 0.7.9+90+suse.f81e290:
    * libmultipath: Increase SERIAL_SIZE to 128 bytes
* Wed Dec 12 2018
  - Update to version 0.7.9+89+suse.df77b66:
  - re-enable "san_path_err_xy" options
    These have been removed upstream, but they were supported
    in SLE-15/Leap15.0, so we can't simply throw them away.
    Improve documentation, mark them as deprecated, but keep
    the code in place.
* Wed Dec 12 2018
  - Update to version 0.7.9+85+suse.766b95e:
    * upstream patch series to make verbosity level 3
      less verbose and thus better usable (bsc#1118937)
    * fix for handling device size mismatch in coalesce_paths()
    * libmultipath: fix false removes in dmevents polling code
    * Spec file: remove build dependency on dracut which causes
      build errors for some distributions
* Mon Nov 26 2018
  - Update to version 0.7.9+58+suse.0790830:
    * libmpathpersist: fix off-by-one error in PRIN length check
    * multipathd: fix mpp->hwe handling when paths are freed
    (fix possible crash caused by new hardware table code)
* Wed Nov 14 2018
  - Update to version 0.7.9+55+suse.9fc8439:
    (note the "55" is due to former merge operations. We actually
    only have 7 patches on top of upstream. All other patches
    referenced below as "not upstream" have been merged).
    * Bump version to 0.7.9
    * multipathd: reset delay_wait_checks counter on failure
    * multipathd: fix irritating "minor number mismatch" message
    * fix possible failure to shut down (bsc#1110060, bsc#1110439)
    * upstream "checker overhaul" - cleanups and improvements for
    path checkers
    * Upstream fixes for failures handling path initializiation
    * various small upstream bug fixes.
* Wed Oct 03 2018
  - Update to version 0.7.7+136+suse.19bb285:
    Bug fixes from upstream, and SUSE bug fixes
    * multipathd: try SCSI persistent reservations for SCSI only
    * libmultipath: allow sysfs_pathinfo to return SKIPPED (bsc#1098458)
    * libmultipath: Fixup updating paths (bsc#1110418)
    * multipathd: fix memory leak on error in configure (bsc#1110418)
    * multipathd: minor fixes (bsc#1110418)
    * multipathd: function return value tweaks (bsc#1110418)
    * multipath: fix max array size in print_cmd_valid (bsc#1110418)
    * libmutipath: don't use malformed uevents (bsc#1110418)
    * libmultipath: fix null dereference int alloc_path_group (bsc#1110418)
    * libmultipath: fix memory issue in path_latency prio (bsc#1110418)
    * libmultipath: fix length issues in get_vpd_sgio (bsc#1110418)
    * multipathd: decrease log level of uevent messages (bsc#1110586)
    * multipathd: fix version check for DM_DEV_ARM_POLL ioctl (bsc#1110587)
    * libmultipath: pathinfo: skip hidden devices (bsc#1110586)
    * libmultipath: nvme: shorter topology output (bsc#1082419)
    * libmultipath: nvme: fix path detection for kernel 4.16 (bsc#1091112)
    * libmultipath: fix gcc 8.1 "truncated output" warnings (bsc#1099007)
    * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
    * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
    * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
    * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
    * libmpathpersist: fix stack overflow in mpath_format_readfullstatus()
    * libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007)
    * libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007)
  - Update to upstream 1a8625abd (0.7.7+82)
    * minor fixes for kpartx, found by coverity
    * mpathpersist: add --param-alltgpt option
    * libmultipath: add "protocol" blacklist option.
    * multipathd: add new wildcard "%P" for "protocol"
    * multipath-tools: fix products names in hwtable
    * libmultipath: more debug output in alua prioritizer (bsc#1080965)
    * libmultipath: alua: retry RTPG for NOT_READY and UNIT_ATTENTION
    * libmultipath: alua_rtpg: use condlog for error messages (bsc#1080965)
* Mon Jul 02 2018
  - Update to version 0.7.7+75+suse.6287aef:
    Added minor updates from upstream
    * multipath-tools: add info about how to enable ALUA in ONTAP
    * multipath-tools: add directio path_checker for DASD devices
    * multipath-tools: make Product Name mandatory and add all of them
    Minor rebase, as some SUSE patches have been merged upstream
    (all mentioned in previous changelogs)
* Fri Jun 29 2018
  - Update to version 0.7.7+72+suse.4b24466:
    * multipath: fix return code handling in delegate_to_multipathd
    * multipath: don't start multipathd unnecessarily (bsc#1098177)
* Mon Jun 25 2018
  - Update to version 0.7.7+70+suse.4a5941e:
    * libmultipath: change partition_delimiter default to "-part"
    (bsc#1073622, bsc#1056526)
    * change default for find_multipaths to "greedy" (bsc#1099054)
    * libmultipath: allow distributions to change partition_delim default
    (bsc#1073622, bsc#1056526)
* Mon Jun 25 2018
  - Update to version 0.7.7+67+suse.a7d1e14:
  - RBD/RADOS backend support has been removed upstream
    remove support for it in SUSE, too (boo#1099037, FATE#826853)
    * added Obsoletes: for multipath-tools-rbd.
  - libdmmp version has changed to 0.2.0
  - New patches not yet upstream:
    (Wed Jun 12 2018: these are now upstream, since 0.7.8)
    * multipathd: fix mpp->hwe handling on path removal (boo#1099028)
    * libmultipath: print correct default for delay_*_checks
    (boo#1099026, bsc#1110418)
    * libmultipath: avoid error messages from RDAC check
    (bsc#1108728, bsc#1075539)
    * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
    * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
    * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
    * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
    * libmpathpersist: fix stack overflow in mpath_format_readfullstatus()
    * multipathd: fix buffer size in cli_getprkey (bsc#1099028)
    * libmultipath: fix gcc 8.1 "truncated output" warnings
    * libmpathpersist: fix typo in mpath_format_readfullstatus
    * libmpathpersist: remove duplicate test in readfullstatus
  - SUSE specific patches preserved:
    * multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828)
    * kpartx: create symlinks for dmraid devices (bsc#1064212)
    * multipath.conf.5: document no_partitons compat support (fate#323406)
    * libmultipath: compat support for 'features "1 no_partitions"' (fate#323406)
    * Added fossology assessment as README.licenses (bsc#1088801)
  - Dropped patches from previous factory/SLE15 release (0.7.3+69+suse.218a0d0):
    * libmultipath: don't [un]set queue_if_no_path after domap
    obsoleted by "libmultipath: cleanup features handling code"
    * multipath.rules: use -i flag to multipath
    obsoleted by path detection patch series
    * libmpathpersist: add support for prkeys file v3
    obsoleted by "mpathpersist: Fix invalid condition check"
    * libmultipath: fix deadlock in tur.c
    obsoleted by "libmultipath: fix tur checker locking"
    * checkers/rbd: missing pthread_lock() on failure path
    obsolete because of RBD removal
    * libmultipath/hwtable: don't hard-code ALUA for IBM IPR
    obsoleted by "libmultipath: hwhandler auto-detection for ALUA" and
    "libmultipath: don't reject maps with undefined prio"
    (bsc#1085212, bsc#1075129)
  - Update to upstream version 0.7.7+50 (39ad8dc8)
  - rework of "find_multipaths" logic
    * find_multipaths can now be "strict", "yes", "no", "greedy", or "smart"
    * SUSE default is "greedy" for now, consistent with previous behavior
    * "multipath -u -i" not necessary in udev rules any more
    (removed SUSE patch "multipath.rules: use -i flag to multipath")
  - patch series for config file handling (bsc#1067789):
    * fix inconsistent handling of multiple config file entries
      matching the same device (bsc#1067789)
    * multipath: implement "multipath -T" (bsc#1067789)
    * multipathd: implement "show config local" (bsc#1067789)
    * libmultipath: merge "multipath" config sections by wwid
    * multipathd: add path format wildcard "%0" for failures
    * libmultipath: config parser: Allow '"' in strings
  - multipath-tools: foreign/NVME implementation (bsc#1082419) for
    native NVME multipath configurations
  - Other new upstream features:
    * mpathpersist: add all_tg_pt option
    * add polling dmevent handler (only one thread waiting for device-mapper
    events rather than one per map).
    * multipath: add "ghost_delay" parameter
    * "marginal path" path state checking for better handling of
      unstable "shaky" connections in a SAN.
      conf options "marginal_path_err_rate_threshold" etc, see man page.
      This replaces the previous "san_path_err_threshold" functionality.
  - Upstream bug fixes:
    * Man page corrections and improvements for multipath.conf(5)
    * libmultipath: fix memory leak in process_config_dir() (bsc#1110352)
    * multipath: don't check timestamps without a path
    * multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
    * libmultipath: don't reject maps with undefined prio (bsc#1085212,
    * multipathd: fix reservation_key check (bsc#1099008)
    * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug
    * libmultipath: hwhandler auto-detection for ALUA
    (bsc#1085212, bsc#1075129)
    * multipath: fix rcu thread cancellation hang (bsc#1110418)
    * multipathd: register threads that use rcu calls (bsc#1110418)
    * multipathd: fix waiter thread cancelling
    * multipathd: use nanosleep for strict timing (avoids possible
    races with SIGALRM)
    * logging fixes:
    * libmultipath: fix log_pthread processing
    * libmultipath: set dm_conf_verbosity
    * libmultipath: fix basenamecpy
    * libmultipath: uev_update_path: update path properties
    * libmultipath: uev_update_path: always warn if WWID changed
    * libmultipath: get_uid: don't quit prematurely without udev
    * libmultipath: get_uid: check VPD pages for SCSI only (bsc#1108728)
    * libmultipath: fix wrong output of "multipath -t"
    * Introduce the libmultipath/unaligned.h header file
    * libmultipath: Fix sgio_get_vpd() (bsc#1099484)
    * kpartx: Improve reliability of find_loop_by_file()
    * libmultipath, alloc_path_with_pathinfo(): Ensure that pp->wwid is '\0'-terminated
    * libmultipath: enable feature disable changed wwid by default
    * multipathd: add lock protection for cli_list_status
    * bug fixes for "marginal path checker"
    * multipathd: fix signal blocking logic (bsc#1110060, bsc#1110439,
    * multipath-tools: add INSPUR/MCS to hardware table
    * multipath-tools: add RDAC SUN/ArrayStorage to hwtable
    * multipath-tools: remove DF arrays from HP
    * multipath: print sysfs state in fast list mode (bsc#1110354)
    * multipathd: remove coalesce_paths from ev_add_map
    * multipath: fix DEF_TIMEOUT use
    * libmultipath: fix tur checker locking
    * multipath-tools: handle exit signal immediately (bsc#1086025)
    * multipathd: release uxsocket and resource when cancel thread
    * path latency prioritizer fixes
    * multipathd.service: set TasksMax=infinity (bsc#1060616)
    * multipathd.service: drop Before=lvm2-lvmetad.service
    * multipathd.socket: add
    * kpartx.rules: fix by-id/scsi-* for user_friendly_names
    * multipath -C: decrease log level
    * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe
    * libmultipath: hwtable: multibus for NetApp NVMe-FC
    * libmultipath: select ALUA prioritizer for RDAC arrays only
    (bsc#1075539, bsc#1081241)
    * libmultipath: get_vpd_sgio: support VPD 0xc9  (bsc#1055949)
    * libmultipath: condlog: log to stderr (bsc#1055949)
    * multipath: delegate dangerous commands to multipathdd (bsc#1047639)
    * libmultipath: don't try to set hwhandler if it is retained
    * libmultipath: don't update path queueing on reload
    * multipathd: marginal path code fixes
    * multipath: check failed path dmstate in check_path
    * multipathd: clean up set_no_path_retry
    * multipathd: fix device creation issues
    * libmultipath: cleanup features handling code
    * multipath: fix hwhandler check in select_action
    * kpartx: don't delete partitions from partitions
    * limbultipath: prefer RDAC checker with detect_checker
    * multipath-tools: add AccelStor/NeoSapphire to hardware table
    * multipath-tools: add TMS/RamSan to hardware table
    * multipath-tools: add XIV/NEXTRA to hardware table
    * multipath-tools: add XIOtech/Magnitude to hardware table
    * libmultipath: ensure checker->fd == -1 if not set
* Thu Apr 12 2018
  - Update to version 0.7.3+69+suse.218a0d0:
    * multipath -ll: print foreign maps only with "-o" flag
    * Revert "disable nvme foreign library"
* Thu Apr 12 2018
  - Update to version 0.7.3+67+suse.8f0c27b:
    * disable nvme foreign library (bsc#1089353)
* Tue Apr 10 2018
  - No functional changes
  - Fixed rpmlint warnings (bsc#1088946)
    * multipath-tools-devel: moved .so files to /usr/lib[64]
    * added version dependencies for -devel packages
* Tue Apr 10 2018
  - No functional changes
    * fixed SPDX syntax (and -> AND)
    * added /usr/share/licenses
* Tue Apr 10 2018<
  - No functional changes, just licenses
  - Spec file: fix %license tags and info after closer inspection
    * kpartx is under GPL-2.0-only
    * rbd is under LGPL-2.1-only
  - Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801)
    * Added fossology assessment as README.licenses
    * multipath-tools: create LICENSES dir with the text of all used licences
* Fri Apr 06 2018
  - Update to version 0.7.3+61+suse.d4d0494:
    * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug
* Wed Mar 28 2018
  - Fixed license tags in spec file
    * multipath tools / libmultipath is GPL-2.0-only
    * libmpathcmd is LGPL-2.0-or-later
    * libdmmp is GPL-3.0-or-later
    * adopt SPDX format.
* Wed Mar 28 2018
  - Update to version 0.7.3+60+suse.46ac839:
    * libmultipath/hwtable: don't hard-code ALUA for IBM IPR
    (bsc#1085212, bsc#1075129)
* Wed Mar 21 2018
  - Update to version 0.7.3+59+suse.1b6191c26774:
    * libmultipath: don't reject maps with undefined prio (bsc#1085212,
    * multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
* Tue Mar 20 2018
  - Update to version 0.7.3+57+suse.bb6be4c8b4ca:
    * multipathd: fix signal blocking logic (bsc#1086025)
    * multipath-tools: handle exit signal immediately (bsc#1086025)
    * multipath: fix DEF_TIMEOUT use (bsc#1086014)
    * multipath-tools: foreign/NVME implementation v2 (upstream accepted)
* Mon Feb 26 2018
  - Update to version 0.7.3+53+suse.140f4937e9e7:
    * libmultipath: fix wrong output of "multipath -t" (bsc#1082835)
* Thu Feb 22 2018
  - Update to version 0.7.3+52+suse.08a969b7fce0:
  - Add limited support for displaying native NVMe multipath
    * libmultipath: foreign/nvme: implement path display
    * multipathd: use foreign API
    * multipath: use foreign API
    * libmultipath/foreign: nvme foreign library
    * libmultipath/print: add "%G - foreign" wildcard
    * libmultipath: API for foreign multipath handling
    * libmultipath: print: use generic API for get_x_layout()
    * libmultipath: print: convert API to generic data type
    * libmultipath: "generic multipath" interface
    * libmultipath: add vector_convert()
    * libmultipath: add vector_free_const()
    * libmultipath: get rid of selector "hack" in print.c
  - Fix locking errors detected by coverity check (bsc#1082418)
    * checkers/rbd: missing pthread_lock() on failure path
    * libmultipath: fix deadlock in tur.c
* Mon Feb 12 2018
  - Fix whitespace in dracut conf file (bsc#1080562)
* Tue Jan 30 2018
  - Update to version 0.7.3+38+suse.a16beed5280a:
    * kpartx: don't delete partitions from partitions (bsc#1078362)
    * hwtable: add latest updates (bsc#1078363)
    * multipathd.service: set TasksMax=infinity (bsc#1060616)
* Fri Jan 26 2018
  - Update to version 0.7.3+31+suse.6804bb73f72d:
    * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe
* Fri Jan 19 2018
  - Update to version 0.7.3+30+suse.6b5ed839:
    * multipath.rules: temporary rule to obtain ID_WWN for NVMe
    * libmultipath: ignore natively multipathed NVME devices
    * multipath.rules: handle NVME devices (bsc#1076828)
    * FIX "libmultipath: hwtable: multibus for NetApp NVMe-FC"
    * libmultipath: increase path product_id/rev field size for NVMe
* Tue Jan 16 2018
  - Update to version 0.7.3+25+suse.7c9920e2:
    * assemble_map: no newline at end of params string (bsc#1072253)
* Thu Jan 11 2018
  - Update to version 0.7.3+24+suse.703a61d5:
    * multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427)
    * libmultipath: hwtable: multibus for NetApp NVMe-FC
    * libmultipath/propsel: select ALUA prioritizer for RDAC arrays only
    (bsc#1075539, bsc#1081241)
    * libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949)
    * libmultipath: sgio_get_vpd: add page argument (bsc#1055949)
    * libmultipath: fix return code of sgio_get_vpd() (bsc#1055949)
* Fri Dec 22 2017
  - Update to version 0.7.3+19+suse.0fd18bdd:
    * multipathd.socket: add (bsc#1072253)
* Fri Dec 22 2017
  - Update to version 0.7.3+18+suse.8c97f433:
    * multipath -C: decrease log level (bsc#1072504)
* Fri Dec 22 2017
  - Update to version 0.7.3+17+suse.cac42e6f:
    * test-kpartx: add test for mapping without UUID
* Wed Nov 29 2017
  - Update to version 0.7.3+15+suse.570d5938:
    * kpartx.rules: fix by-id/scsi-* for user_friendly_names
* Mon Nov 20 2017
  - Update to version 0.7.3+14+suse.da06e7f3:
    * libmultipath: fix return code of sysfs_get_timeout (bsc#1069037)
* Mon Nov 06 2017
  - added sample code for libmpathpersist (bsc#1066376)
    * added libmpathpersist-example.c
  - multipath-tools.spec: package symlink in -devel
    package (bsc#1066376). We *do not* package header files for
    libmultipath, as the APIs are not public.
* Fri Nov 03 2017
  - multipath-tools.spec: package *.so symlinks in -devel pkgs
  - multipath-tools.spec: SLE15: add RADOS support for s390x
  - Fix build error for targets SLE_12, SLE_12_SP1
* Thu Oct 26 2017
  - Update to version 0.7.3+13+suse.db431514080f:
    * kpartx: create symlinks for dmraid devices (bsc#1064212)
    * limbultipath: prefer RDAC checker with detect_checker
* Tue Oct 17 2017
  - Update to version 0.7.3+11+suse.4de08d96:
    * libmultipath: condlog: log to stderr (bsc#1063059)
* Thu Sep 21 2017
  - Update to version 0.7.3+10+suse.70ccb55b0439:
  - Rebase to upstream release 0.7.3
    * libmultipath: add pthread_cleanup hook for udev monitor
    * libmultipath: pull functions into util.c
    * libmultipath: change reservation_key to a be64
    * libmpathpersist: fix update_prflag code
    * multipath: add alternate reservation_key method
    * mpathpersist: add support for prkeys file
    * multipath-tools: minor edition and corrections in multipath.conf.5
    * multipath-tools: fix incorrect length for strncmp in uevent.c
    * multipath-tools: clarify how to dump the multipathd config
    * multipath-tools: replace "setting: array" with "setting: storage device" at multipath output
    * libmultipath: sanitize fd handling
    * multipath-tools: link internal libraries before foreigns
    * multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable
    * multipath-tools: add support for all arrays from Sun StorEdge 3000 family
    * multipath-tools: add Xiotech iglu blaze arrays to hwtable
    * multipath-tools: add Dot Hill/Seagate arrays to hwtable
    * libmultipath: update INFINIDAT builtin config
    * multipath-tools: add info about adding new hardware
    * multipath-tools: Remove the limitation of IPC command reply length.
    * multipath-tools: libdmmp: Improve timeout mechanism
    * multipath-tools: libdmmp: New function to flush and reconfig
    * Bump version to 0.7.3
  - minor fixes for upstream 0.7.3
    * libmultipath: ensure checker->fd == -1 if not set
    * libmpathpersist: add support for prkeys file v3
    * multipath: add man page info for my prkey changes
  - Patch series for NVMe discovery and failover (bsc#1038865, bsc#1057820)
    * discovery: sanitize NVMe discovery
    * libmultipath/discovery: modify NVMe path states
    * Add 'none' checker
    * hwtable: set 'none' as default checker for NVMe
* Mon Sep 18 2017
  - Update to version 0.7.2+49+suse.993a29b1188d:
    * Revert "11-dm-mpath.rules: Remember DM_ACTIVATION" (boo#1059227)
    * Revert "11-dm-mpath.rules: don't set READY->ACTIVATION"
    * multipath: delegate using libmpathcmd (bsc#1047639)
* Mon Sep 18 2017
  - split off rados support into separate multipath-tools-rbd package.
    This avoids pulling in the whole rados/ibverbs/rdma stack with
    multipath-tools. (bsc#1058504).
  - multipath-tools-rbd is Recommended but not Required by multipath-tools.
* Sat Sep 02 2017
  - Update to version 0.7.2+44.3a8d750c:
    Misc bug fixes:
    * multipathd: don't flood system with sd_notify calls (bsc#1056011)
    * libmultipath: add_feature: skip pointless NULL check (bsc#1055635)
    * libmultipath: add_feature: allow only 1 feature (bsc#1055635)
    * multipath: delegate dangerous commands to multipathd (bsc#1047639)
    * libmultipath: fix partition_delimiter config option (bsc#1056526)
    * kpartx: helper functions for name and uuid generation (bsc#1056508)
    * kpartx: search partitions by UUID, and rename (bsc#1056508)
    * kpartx: fix a corner case when renaming partitions (bsc#1056508)
    * kpartx: -d must work with empty partition table (boo#1056599)
    * kpartx: only recognize dasd part table on DASD (boo#1056599)
    Rework of the udev rules related to multipath and kpartx (bsc#1054363):
    * libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation
    * libmultipath: add get_udev_device
    * libmultipath: get_refwwid: use get_udev_device
    * libmultipath: use const char* in some dm helpers
    * libmultipath: add DI_NOIO flag for pathinfo
    * libmultipath: add dm_get_multipath
    * multipath: implement "check usable paths" (-C/-U)
    * 11-dm-mpath.rules: multipath -U for READY check
    * 11-dm-mpath.rules: import more ID_FS_xxx vars from db
    * 11-dm-mpath.rules: no need to test before IMPORT
    * 11-dm-mpath.rules: handle new maps with READY==0
    * 11-dm-mpath.rules: don't set READY->ACTIVATION
    * 11-dm-mpath.rules: Remember DM_ACTIVATION
    * multipath.rules: set ID_FS_TYPE to "mpath_member"
    * kpartx.rules: don't rely on DM_DEPS and DM_TABLE_STATE
    * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
    * kpartx.rules: improved logic for by-uuid and by-label links
    * kpartx.rules: create by-partuuid and by-partlabel symlinks
    * kpartx.rules: generate type-name links only for multipath devices
    * kpartx.rules: fix logic for adding partitions
    * multipath/kpartx rules: avoid superfluous scanning
    * kpartx/del-part-nodes.rules: new udev file
    * kpartx.rules: move symlink code to other files
  - multipath-tools.spec:
    * added 68-del-part-nodes.rules to support partition deletion
    * added 00-dont-del-part-nodes.rules to disable partition deletion
    by default on openSUSE/SLES for now.
    * added 11-dm-parts.rules to kpartx package
    * added dracut.conf file to make sure 11-dm-parts.rules is included
    in initrd
* Mon Aug 14 2017
  - Update to version 0.7.2+14+suse.5721c345:
    * cli_add_map: Use CMD_NONE (bsc#1053515)
    * multipath-tools: link internal libraries before foreigns
    * multipathd daemon: Fix incorrect use of CLOCK_MONOTONIC in
    pthread (bsc#1053757)
* Fri Aug 11 2017
  - Update to version 0.7.2+11+suse.448921a2:
    * multipath.conf.5: document no_partitions compat support
    * libmultipath: fixup compat support for 'features "1 no_partitions"'
* Fri Aug 11 2017
  - Dropped 67-kpartx-compat.rules (SUSE legacy).
    * symlinks "/dev/mapper/${UUID}_part${X}" are not created any more,
      only     "/dev/mapper/${UUID}-part${X}" (with "minus")
  - Dropped automatic kpartx invocation on dmraid devices (fate#323743)
  - Rebase to upstream multipath-tools 0.7.2:
    * libmultipath: retain_attached_hw_handler obsolete with 4.3+
    * multipath-tools: move up TEMPLATE in hwtable
    * multipath-tools: delete libdmmp/docs/man directory in make clean
    * libmultipath: fix unit to seconds in log message for checker timeout
    * multipath-tools: add HPE StoreVirtual 3200 family to hwtable
    * multipath-tools: add HPE MSA 2050/2052 to hwtable
    * multipath-tools: add/change fujitsu arrays
    * multipath-tools: check sysfs path state for NVMe/NVMf
    * multipath-tools: sync third-party headers with 3.13 upstream
    * multipath-tools: beautify path_latency.c code
    * multipath-tools: fix format in multipath.conf.5
    * libmultipath: update 3PARdata builtin config
    * Bump version to 0.7.2
  - Update to version 0.7.2+8+suse.95e8f43e:
    * libmultipath: don't try to set hwhandler if it is retained
    * libmultipath: don't [un]set queue_if_no_path after domap
    * kpartx/devmapper.h: remove dm_no_partitions
    * libmultipath: compat support for 'features "1 no_partitions"'
    * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
    * kpartx.rules: Use DM_ACTIVATION as condition (fate#323406)
    * kpartx.rules: skip creating by-uuid and by-label links
* Thu Jul 20 2017
  - Update to version 0.7.1+69+suse.3bfa5af1:
    * Merge branch 'sles12-sp3-fixes' into sles12-sp3
    * libmultipath: get_udev_uid: make sure pp->wwid is 0-terminated
    * libmultipath: drop uevent_can_discard_by_devpath (bsc#1048052)
    * libmultipath: only listen for uevents with DEVTYPE=disk
    * libmultipath: fix over-long NVME WWIDs
* Tue Jun 27 2017
  - Update to version 0.7.1+64+suse.aabe8c87:
    * Updated "no_path_retry" patchset to v4 (minor change)
    * kpartx.rules: Fix syntax error in skip_kpartx code (bsc#1046092)
  - _service: use "match-tag" to refer only to offical tags
* Wed Jun 21 2017
  - Update to version 0.7.1+62+suse.62a2c36e:
    * kpartx: only check for 'no_partitions' feature on dm devices
    * Revert "kpartx: use mapname if no uuid is present"
      (bsc#1037533, bsc#1033541)
  - "no_path_retry" patch series (bsc#1043027)
    * libmultipath: load_config: skip setting unnecessary defaults
    * libmultipath: add/remove_feature: use const char* for feature
    * libmultipath: clarify option conflicts for "features"
    * libmultipath: merge_hwe: fix queue_if_no_path logic
    * libmultipath: assemble_map: fix queue_if_no_path logic
    * multipath.conf.5: document no_path_retry vs. queue_if_no_path
    * multipath.conf.5: Remove ??? and other minor fixes
    * libmultipath: add deprecated warning for some features settings
  - _service: Use "sles12-sp3" branch as revision, as factory
    and SLE12-SP3 submissions are in sync. Will be changed when
    factory forks off (latest at SLE12-SP3 GA).
* Tue Jun 20 2017
  - set KBUILD_BUILD_TIMESTAMP to generate reproducible man-pages
    to fix build-compare (bsc#1045111)
* Wed Jun 14 2017
  - Update to version 0.7.1+53+suse.07c2f6ac
  - kpartx patch series from upstream (bsc#1037533, bsc#1033541)
    * kpartx: only check for 'no_partitions' feature on dm devices
    * kpartx: test-kpartx: new unit test program
    * kpartx: remove is_loop_device
    * kpartx: relax and improve UUID check in dm_compare_uuid
    * kpartx: dm_remove_partmaps: support non-dm devices
    * kpartx: dm_devn: return error for non-existent device
    * kpartx: don't treat multi-linear mappings as partitions
    * libmultipath: don't treat multi-linear mappings as partitions
    * kpartx: use partition UUID for non-DM devices
    * kpartx: use absolute path for regular files
    * kpartx: find_loop_by_file: use sysfs
    * kpartx: include sys/sysmacros.h
    * Revert "kpartx: relax check when checking for a kpartx device"
  - Spec file: use new build flag for libdmmp installation
    (bsc#1036652), enabled by upstream fix:
    * libdmmp: enable library installation in alternative directory
  - Other bug fixes from upstream:
    * libmultipath: print.c: make sure lines are 0-terminated (bsc#1038865)
    * multipath-tools: fix compilation with gcc < 4.9
    * kpartx: fix device checks
    * mpath_persist: Don't join threads that don't exist
    * libmultipath: fix suspended devs from failed reloads
    * mpathpersist: fix one more crash possiblity
  - Minor upstream changes:
    * multipath: Merge the DELL MD3xxx device configs
    * multipath: fix up position independent code
    * libmultipath: fix partition detection (bsc#1037533)
    * kpartx: default to running in sync mode
    * libmultipath: force udev reloads
    * libmultipath: print alias with no_path_retry message
    * multipathd: force reload device on all resizes
    * libmultipath: refactor calls to get dm device info
    * multipath-tools: document uid_attribute for NVME devices
    * Makefile: Remove assignments to unused variables
    * libmultipath/configure.h: Add a forward declaration
    * libmpathpersist: Add two missing #include directives
    * Remove mpath_reverse_8bytes_order()
    * Move the declaration of mpath_mx_alloc_len to a header file
    * Remove a superfluous "extern" keyword
    * mpathpersist.8: add missing documentation for -K, -C, -l
* Thu Apr 27 2017
  - spec file: Disable RADOS support for i586 on Leap 42.x (bsc#1036271)
  - spec file: Move libdmmp to /usr/lib[64] (bsc#1036652)
  - Update to version 0.7.1+7+suse.3edc5f7d:
    * kpartx: use mapname if no uuid is present (bsc#1033541)
    * kpartx: relax check when checking for a kpartx device (bsc#1033541)
    * libmpathpersist: use extern struct udev (bsc#1027188)
    * kpartx: include sys/sysmacros.h (fix compilation warning)
  - Update to upstream version 0.7.1:
    * multipath-tools: improve processing efficiency for addition and deletion of multipath devices
    * uevent_can_discard: optimize devpath check
    * multipathd: fix SIGUSR2 handling
    * multipath-tools: clean up libdmmp/Makefile
    * multipath-tools: libdmmp: Fix incorrect use of __attribute__
    * multipath-tools: Remove trailing whitespaces
    * multipath-tools: add missing "-l" flag for pthread in libdmmp/Makefile
    * multipath-tools: build objects for libdmmp and libmpathpersist independently
    * libdmmp: minor Makefile cleanup
    * multipath-tools: remove incdir from Makefiles
    * libdmmp: don't disconnect from multipathd twice
    * multipathd: don't call strlen on NULL variables
    * libdmmp: move libdmmp.pc install location
    * multipathd: drop lock before calling uev_add_path
    * multipathd: allow devices to switch from RW to RO
    * libmultipath: don't set max_sectors_kb on reloads
    * Remove a trailing tab
    * multipath: fix segfault with disable_changed_wwids
    * multipath-tools: amend text from multipath/multipath.conf.5
    * Bump the version code and date
    * multipath-tools: replace multipath configuration output
    * Revert "multipathd: set timeout for CLI commands correctly"
    * libmultipath: fix skip_kpartx support for removing maps
    * Bump version to 0.7.1
* Fri Mar 24 2017
  - spec file changes suggested by factory review team (bsc#1030699)
    * RPM group adjustments.
    * Avoid %__ macro indirections
* Thu Mar 23 2017
  - Enable rados for SLES only for x86_64 and aarch64 (ceph is currently
    disabled on SLES on s390x and ppc64le) (bsc#1030699)
  - Downgrade to version 0.6.4+103+suse.bcb5d0f4:
    * temporarily remove commit "multipathd: fix SIGUSR2 handling"
    until it's merged in official repo (bsc#1030699)
* Tue Mar 21 2017
  - Spec file: disable librados for architectures for which ceph
    is not built
  - Spec file: enable librados by default for SLES12 SP3, disable
    it on Leap <= 42.1
  - Update to version 0.6.4+104+suse.ac0df678:
    * multipathd: fix SIGUSR2 handling
* Fri Mar 10 2017
  - Update to version 0.6.4+103+suse.bcb5d0f4:
    * changed to official github repo openSUSE/multipath-tools
      (no changes code-wise)
* Fri Mar 10 2017
  - Spec file: Added dependency on sg3_utils (boo#1028857)
* Wed Mar 01 2017
  - spec file changes: optional librados and libdmmp support
    * enabled by default on Factory and Leap
      (disable with --without-rados, --without-libdmmp)
    * disabled by default on SLES12
      (enable with --with-rados, --with-libdmmp)
    * libdmmp0_1_0 and libdmmp-devel as separate packages
    * minor fixes for RPMLINT warnings
  - Update to version 0.6.4+102.0119472d:
    * rebased, code-wise identical to previous checkout
* Tue Feb 28 2017
  - Update to version 0.6.4+102.df7d367e:
    * libmultipath/propsel: Do not select sysfs prioritizer for RDAC arrays
* Tue Feb 28 2017
  - Update to version 0.6.4+101.f01ef4da (SLES12 SP2 changes wrt upstream):
    * Make libdmmp build optional
    * multipath.rules: use -i flag to multipath
    * kpartx: create symlinks for dmraid devices
    * kpartx: Add udev compability rules for SUSE
    * libmultipath/checkers: make RADOS checker optional
    * multipathd: fixup check for new path states (bsc#1019798)
    * tur: Add pthread_testcancel() (bsc#101979)
    * kpartx: sanitize delete partitions (bsc#100869)
    * libmultipath: coalesce_paths: trigger uevent if nothing done
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: differentiate ACT_NOTHING and ACT_IMPOSSIBLE
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: reload map if not known to udev
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: sysfs_attr_set_value: use const char*
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: select_action: check special features separately
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: disassemble_map: treat aminio like assemble_map does
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: disassemble_map: skip no_path_retry check
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: setup_feature: handle "retain_attached_hw_handler"
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: setup_feature: print log msg if no_path_retry cant be set
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: setup_features: log msg if queue_if_no_path is ignored
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * multipathd: use weaker "force_reload" at startup
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * multipathd: imply -n if find_multipaths is set (bsc#1012910)
    * multipath: ignore -i if find_multipaths is set (bsc#1012910)
    * libmultipath: move suspend logic to _dm_flush_map (bsc#986838)
    * multipath -ll: set DI_SERIAL (bsc#991432)
    * libmultipath: use existing alias from bindings file (bsc#1005255)
    * libmultipath/discovery: do not cache 'access_state' sysfs attribute (bsc#1004858)
    * multipathd: issue systemd READY after initial configuration (bsc#1006469)
    * multipath: avoid crash when using modified configuration (bsc#1000914)
    * multipathd: Set CLI timeout correctly (bsc#999061)
    * libmultipath: Do not crash on empty features (bsc#994812)
    * libmultipath: fall back to search paths by devt (bsc#995645)
    * multipathd: set timeout for CLI commands correctly (bsc#999061)
    * Invalid error code when using multipathd CLI
    * multipath: do not check daemon from udev rules (bsc#986734)
    * Add support for "multipath=off" and "nompath" on kernel cmdline
    * multipathd: start daemon after udev trigger (bsc#98673)
    * multipathd.service: fixup Wants= and Before= statements (bsc#1019181, bsc#991742, bsc#986734)
  - Update to current upstream (0.6.4-65-ga2675025)
    * Avoid that reloading a map sporadically triggers I/O errors
    * fix udev rules for failed multipath devices
    * multipathd: allow resetting stats
    * multipathd: add messages on delayed path addition
    * multipathd: don't update priority of failed paths
    * libmultipath: cleanup orphan device states
    * libmultipath: add detect_checker option
    * kpartx: don't keep creating recursive partitions
    * multipath-tools: Introducing multipath C API
    * multipath-tools: sync valgrind.h with 3.12 upstream
    * multipath-tools: add availability of service-time and queue-length to multipath.conf.5
    * multipath-tools: add availability of service-time and queue-length to multipath.conf.5
    * Fill NVMe specific path info
    * Don't blacklist nvme
    * multipath-tools: fix misspellings
    * multipath-tools: git should ignore rej and orig files
    * Include sys/sysmacros.h
    * Tolerate modprobe failures in multipathd.service
    * multipath-tools: Remove trailing and leading whitespaces
    * multipath-tools: Perform socket client uid check on IPC commands.
    * multipath-tools: Set errno mpath_recv_reply() when failure
    * multipath-tools: New way to limit the IPC command length.
    * multipath-tools: libmultipath: Removed unused functions.
    * multipath-tools: libmultipath: fix gcc link failure on rcu_register_thread_mb.
    * multipath-tools: multipathd: Fix memory leak on load_config().
    * [multipathd] Remove trailing whitespaces
    * multipathd: deterministic io throughput in multipath
* Sat Feb 18 2017
  - Remove superfluous PreReq for insserv and fillup
* Thu Sep 29 2016
  - Update to version 0.6.2+suse20160928.8939fb6
* Thu Sep 29 2016
  - Implement support for 'multipath=off' and 'nompath'
    kernel commandline options (bsc#1001691)
* Wed Sep 28 2016
  - multipath: avoid crash when using modified configuration
* Mon Sep 19 2016
  - libmultipath: Do not crash on empty features (bsc#994812)
  - multipathd: Set CLI timeout correctly (bsc#999061)
  - Moved multipath-tools repository to
* Thu Sep 08 2016
  - Fixup glitch from patch 'fixup check from udev rules' (bsc#986734)
  - Remove 0001-libmultipath-fall-back-to-search-paths-by-devt.patch;
    integrated into git repository
* Mon Aug 29 2016
  - libmultipath: fall back to search paths by devt (bsc#995645)
* Fri Aug 26 2016
  - Fixup module name in /usr/lib/modules-load.d (bsc#986734)
* Fri Aug 26 2016
  - multipath: fixup check from udev rules (bsc#986734)
* Wed Aug 24 2016
  - multipathd: start daemon after udev trigger (bsc#986734)
  - Load device handler and multipath module at boot (bsc#991634)
* Fri Aug 19 2016
  - Do not check daemon from udev rules (bsc#986734,bsc#990538)
* Fri Aug 05 2016
  - Include fixes from upstream:
    * memory leak in orphan_paths
    * More hardware table cleanups
    * Add 'serial' keyword to weightedpath prioritizer
  - Set timeout for CLI commands correctly (bsc#990265)
  - Start daemon after udev trigger (bsc#991742,bsc#986734,bsc#990538)
  - multipathd.service: Fixup Wants= and Before= statements
    (bsc#991742, bsc#986734)
* Thu Jul 28 2016
  - Include patches from upstream:
    * Cleanup hardware tables by removing default entries
    * More formatting fixes
    * Order keywords in multipath.conf.5
    * Change default pgpolicy from 'failover' to 'group_by_prio'
    * kpartx: Fix check whether to detach a loop device
    * Fix partly traversed loop in coalesce_paths()
    * Fix memory leak in reconfigure()
    * Cleanup include header files
    * Bump version code to 0.6.2
  - Fix multipath -l <devmap> without output (bsc#990480)
  - Fix spelling in a log message
  - Fix type of rcu_unregister()
  - Do not perform POSIX mutex operations inside a signal handler
  - Ensure that signals are delivered to the uxsock thread
  - Fix memory leak in path group policies
  - Update tarball to 0.6.2+suse20160728.d96f423
* Fri Jul 15 2016
  - Include patches from upstream:
    * Makefile cleanup
    * Update multipath.conf.5
    * Update hardware tables
    * Whitespace cleanup
  - Fixup crash during shutdown (bsc#988539)
  - Update tarball to 0.6.1+suse20160715.3d44636
* Mon Jul 04 2016
  - Remove obsoletes spec sections
* Mon Jul 04 2016
  - Move config accesses to use user-space RCU (bsc#987526)
    * Revert 'move filter_devnode under vector lock'
    * Revert the rework patch
  - Include patches from upstream:
    * Update hardware tables
    * Update kpartx manpage
    * Whitespace fixes
    * Include coverity fixes
    * Drop AUTHOR file
  - Update tarball to 0.6.1+suse20160704.6e52398
* Wed Jun 08 2016
  - fix service file to not pretend that this is the upstream version.
    Now labeled 0.6.1+suse20160603.9b920e3
  - Fix BuildRequire to get systemd.pc from correct package (bsc#983167)
  - point rcmultipathd to /usr/sbin/service to avoid dangling symlink warning
* Fri Jun 03 2016
  - Rework patch 'move filter_devnode under vector lock'
* Mon May 30 2016
  - multipathd: Fixup definition of set_unlocked_handler_callback()
  - mpathcmd.h: Update Free Software Foundation address
* Fri May 27 2016
  - Do not install header file with mode 755
* Wed May 25 2016
  - Update to latest upstream version 0.6.1
    * Merge suse-specific patches
    * Drop multipath.conf.* files
    * Update to version 0.6.1
    * multipathd: move 'filter_devnode' under vector lock
    * libmultipath: use poll() in uevent_listen()
    * Increase kpartx retries
    * Merge Dell MD3XXX hardware table entries
    * multipathd: Add 'sysfs' prioritizer (bsc#927040)
    * libmultipath: call get_vpd_uid() if no uid_attribute is set
    * multipathd: update defaults
* Fri May 06 2016
  - Update to latest upstream version 0.6.0 (FATE#319406)
    * Update documentation
    * Fix memory leak and segfault in reconfigure
    * Add wwn keyword to weightedpath prioritizer
    * Use 64-bit int for command key
    * check partions unused before removing
    * print 'fail' when remove fails
    * add exclusive_pref_bi for alua prioritizer
    * kpartx: verify parition devices
    * multipathd: delay reloads during creation
    * Cut down alua prioritizer ioctls
    * Add 'ignore_new_boot_devs' option
    * Add libmpathcmd library and use it internally
    * retrigger uevents to try and grab uid
    * Update to version 0.6.0
* Fri Apr 15 2016
  - Port to latest upstream version (FATE#319406, FATE#320255)
    * kpartx: support device names with spaces
    * add raw format multipathd commands
    * make kpartx -d remove all partitions
    * Add find_multipaths option
    * Autodetect ALUA CLARiiON configurations
    * Delayed path reintegration
    * enable configuration directory
    * read-only bindings
    * Add deferred_remove support
    * correctly set partition delimiter on rename
    * Add overrides section to multipath.conf
    * Add additional path wildcards
    * Add force_sync option
    * Misc small patches
* Thu Mar 24 2016
  - multipathd: do not flush maps on startup
  - Use find_path_by_dev() where possible (bsc#924316)
  - Fixup error return in store_path() (bsc#972329)
  - Do not display message 'invalid fd'
* Tue Mar 08 2016
  - Fixup overzealous warning 'empty device number' (bsc#969857)
* Wed Feb 17 2016
  - multipathd: fixup signal handling (again)
  - Revert 'trigger all devices on startup'
  - multipathd: print error message for invalid arguments
  - multipathd: block checkerloop during reconfiguration (bsc#946658)
  - libmultipath: correctly initialize pp->sg_id
  - multipathd: don't buffer output with systemd (bsc#954726)
  - multipath.rules: Do not forward partition events (bsc#954726)
  - libmultipath: improve uxlsnr handling (bsc#954726)
  - multipathd: do not realloc memory in uxlsnr (bsc#954726)
  - libmultipath: call get_uid() for all paths (bsc#935312)
  - multipathd: Do not print misleading message 'not found in pathvec'
  - multipathd: Do not update the paths vec when removing paths
  - multipathd: Do not switch paths on empty multipath tables (bsc#956349)
  - libmultipath: remove 'get_info' argument for adopt_paths()
  - libmultipath: ensure 'dev_t' is set when store paths (bsc#924316)
  - libmultipath: Do not store paths with empty dev_t (bsc#924316)
  - libmultipath: Do not store paths with empty device name (bsc#924316)
  - libmultipath: sysfs_set_rport_tmo still wrong (bsc#926588)
  - Add LIO-ORG/SUSE RBD backend hardware defaults (bsc#947845)
  - multipath: Reset alias if renaming fails (bsc#943157)
* Fri Nov 06 2015
  - Fixes for md_monitor on zFCP (FATE#319070):
    * strict loop timings
    * multipathd: fixup a crash when invoking CLI commands
    * multipathd: implement 'show map $map format $format
* Tue Aug 25 2015
  - Fixup hang in 'multipath -f' (bsc#941954)
* Mon Aug 03 2015
  - Create package for SLE12-SP1.
    * Remove multipath-tools-0.5.0-sles12.diff.bz2
    * Add multipath-tools-0.5.0-sles12-sp1.diff.bz2
  - kpartx: parse emulated DASD devices
  - multipathd: Fixup queueing mode in 'show maps status' (bsc#933885)
  - multipathd: Accept zero-sized paths in ev_add_path
  - Always set DM_UDEV_DISABLE_LIBRARY_FALLBACK (bsc#933282)
  - libmultipath: Fixup 'DM_DEVICE_RELOAD' handling (bsc#933282)
  - libmultipath: correctly display checker status
* Wed Apr 08 2015
  - Remove 'udev_sync' argument from dm_simplecmd (bsc#903001)
  - Ensure multipathd is started before systemd-udev-trigger
* Tue Apr 07 2015
  - Only import ID_FS_XXX variables if not set (bsc#909358)
  - Fixup regular expression for HP MSA 2040 (bsc#920189)
* Wed Mar 18 2015
  - Add dependency on systemd-udevd.service (bsc#903001)
  - Use ALUA for HP 3PAR (bsc#922105)
  - Add DX8700 S3 and DX8900 S3 defaults (bsc#921703)
  - Load all device handler modules on startup (bsc#908529)
* Fri Mar 13 2015
  - libmultipath: make vpd page 0x80 optional (bsc#917963)
  - Add HP MSA 2040 to the hardware table (bsc#920189)
  - Revert 'Skip unhandled device types' (bsc#917701)
* Thu Jan 29 2015
  - skip uninitialized devices during reconfiguration (bnc#908915)
  - memory overflow when printing help text (bnc#909742)
* Tue Dec 16 2014
  - Do not automatically fall back to vpd uid generation
  - Improve vpd parsing
  - multipathd: trigger all devices on startup (bnc#901465)
  - Unset 'uid_attribute' on failure
* Wed Dec 10 2014
  - libmultipath: Fall back to SG_IO if no UID could be assigned
  - Assign local priority for NAA VPD descriptor (bnc#907483)
  - libmultipath: finally fix dev_loss_tmo setting (bnc#889927)
  - libmultipath: Do not use 'sscanf' for parsing integers (bnc#889927)
  - devmapper: do not flush I/O for DM_DEVICE_CREATE (bnc#901809)
  - kpartx: handle more than 256 loop devices (bnc#898427)
  - multipathd: fixup locking in uev_remove_map() (bnc#901891)
  - multipathd: use global variable for uxsock timeout (bnc#900758)
  - multipathd: remove unused variable in cli_reconfigure()
  - Add %service calls for multipathd.socket



Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Jul 9 12:50:41 2024