Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

i2pd-2.38.0-1.3 RPM for armv6hl

From OpenSuSE Ports Tumbleweed for armv6hl

Name: i2pd Distribution: openSUSE Tumbleweed
Version: 2.38.0 Vendor: openSUSE
Release: 1.3 Build date: Sat Sep 25 01:25:33 2021
Group: Productivity/Networking/System Build host: obs-arm-11
Size: 2631024 Source RPM: i2pd-2.38.0-1.3.src.rpm
Summary: C++ implementation of an I2P client
The Invisible Internet Protocol (I2P) is a universal anonymous network layer. All
communications over I2P are anonymous and end-to-end encrypted, participants
don't reveal their real IP addresses.

This package contains a C++ implementation of an I2P router.






* Wed May 19 2021 Ferdinand Thiessen <>
  - Update to version 2.38.0
    * ipv6 introducers and peer test
    * Support .b32.i2p addresses and hostnames for SAM STREAM CREATE
    * Blinding of EdDSA signing keys
    * Publish iexp param for introducers
    * Send updated LeaseSet for incoming ECIES-x25519 session
    * Bind ipv6 or yggdrasil NTCP2 acceptor to specified address
    * Don't publish LeaseSet without inbound tunnels
    * Rekey of all routers but floodfills to ECIES
    * Recognize ipv4 and ipv6 SSU addresses without host
    * Show ipv6 network status and router version on the webconsole
* Sat May 08 2021 Ferdinand Thiessen <>
  - Update to version 2.37.0
    * Address registration line for reg.i2p and stats.i2p through the
      web console
    * "4" and "6" caps for addresses without published IP address
    * Fixed incoming SSU session termination after 5 seconds
    * Floodfills with "U" cap are not ignored anymore
    * Show actual IP addresses for proxy connections
    * address4 and address6 parameters to bind outgoing connections
      to lookuplocal BOB extended command
    * Mesh and Proxy network statuses
    * Symmetric NAT network status error
    * NTCP2 and reseed HTTP proxy support authorization now
    * Fixed race condition between tunnel build and floodfill
      requests decryption for ECIES routers
    * Correct handling of numeric bandwidth limitation
    * Rekey of low-bandwidth routers to ECIES
    * Bind server tunnel connection to specified address
    * Outbound tunnel endpoint must be ipv4 compatible
    * Allow incoming Yggdrasil connection if NTCP2 is connected
      through a proxy
  - Update to version 2.36.0
    * ECIES-x25519 (crypto type 4) for new routers
    * reg.i2p for default addressbook instead inr.i2p
    * Yggdrasil transports and reseeds
    * Encrypted lookup and publications to ECIES-x25519 floodfiils
    * Dump addressbook in hosts.txt format
    * Try to connect to all compatible addresses from peer's
    * ECIES-X25519-AEAD-Ratchet for shared local destination
    * Fixed handling chunked HTTP response in addressbook
    * Calculate missing ECIES-X25519-AEAD-Ratchet tags for multiple
      streams with the same destination
    * Request RouterInfo through exploratory tunnels if direct
      connection to fllodfill is not possible
    * Select reachable router of inbound tunnel gateway
    * Reseed if no compatible routers in netdb
    * Check if public x25519 key is valid
    * Replace LeaseSet completely if store type changes
    * Limit tunnel length to 8 hops and quantity to 16
    * Decrypt follow-on ECIES-X25519-AEAD-Ratchet NSR messages
    * Fixed SSU crash on termination
    * Correct NAME for NAMING REPLY in SAM
    * Viewport and styles on error in HTTP proxy
    * Cumulative SSU ACK bitfields
* Wed Jan 20 2021 Wang Jun <>
  - Update to version 2.35.0
    * Added
    - ECIES-x25519 routers
    - Random intro keys for SSU
    - Graceful shutdown timer for windows
    - Send queue for I2CP messages
    - Update DSA router keys to EdDSA
    - TCP_QUICKACK for NTCP2 sockets on Linux
    * Changed
    - Exclude floodfills with DSA signatures and < 0.9.28
    - Random intervals between tunnel tests and manage for tunnel pools
    - Don't replace an addressbook record by one with DSA signature
    - Publish RouterInfo after update
    - Create paired inbound tunnels if no inbound tunnels yet
    - Reseed servers list
    * Fixed
    - Transient signature length, if different from identity
    - Terminate I2CP session if destroyed
    - RouterInfo publishing confirmation
    - Check if ECIES-X25519-AEAD-Ratchet session expired before generating more tags
    - Correct block size for delivery type local for ECIES-X25519-AEAD-Ratchet
  - Update to version 2.34.0
    * Added
    - Ping responses for streaming
    - Tunnels through ECIES-x25519 routers
    - Single thread for I2CP
    - Shared transient destination between proxies
    - Database lookups from ECIES destinations with ratchets response
    - Handle WebDAV HTTP methods
    - Don't try to connect or build tunnels if offline
    - Validate IP when trying connect to remote peer
    - Handle ICMP responses and WinAPI errors for SSU
    * Changed
    - Removed NTCP
    - Dropped gcc 4.7 support
    - Encyption type 0,4 by default for client tunnels
    - Stripped out some HTTP header for HTTP server response
    - HTTP 1.1 addressbook requests
    - Set LeaseSet type to 3 for ratchets if not specified
    - Handle SSU v4 and v6 messages in one thread
    - Eliminate DH keys thread
    * Fixed
    - Random crashes on I2CP session disconnect
    - Stream through racthets hangs if first SYN was not acked
    - Check "Last-Modified" instead "If-Modified-Since" for addressbook reponse
    - Trim behind ECIESx25519 tags
    - Few bugs with Android main activity
    - QT visual and layout issues
* Wed Aug 26 2020 Alexei Podvalsky <>
  - Update to 2.33.0:
    * Shared transient addresses
    * crypto.ratchet.inboundTags paramater
    * Multiple encryption keys through I2CP
    * Pre-calculated x25519 ephemeral keys
    * Change datagram routing path if nothing comes back in 10
    * Shared routing path for datagram session
    * UDP tunnels send mix of repliable and raw datagrams in bulk
    * Encrypt SSU packet again upon resend
    * Start new tunnel message if remaining buffer is too small
    * Use LeaseSet2 for ECIES-X25519-AEAD-Ratchet automatically
    * Save new ECIES-X25519-AEAD-Ratchet session with NSR tagset
    * Generate random padding lengths for ECIES-X25519-AEAD-Ratchet
      in bulk
    * Webconsole layout
    * Reseed servers list
    * Don't connect through terminated SAM destination
    * Differentiate UDP server sessions by port
    * ECIES-X25519-AEAD-Ratchet through I2CP
    * Don't save invalid address to AddressBook
    * ECDSA signatures names in SAM
    * AppArmor profile
  - Drop i2pd-2.19.0-apparmor.patch
* Mon Aug 17 2020 Dirk Mueller <>
  - update to 2.32.1:
    - Read explicit peers in tunnels config
    - Generation of tags for detached sessions
    - Non-updating LeaseSet1
    - Start when deprecated websocket options present in i2pd.conf
    - Multiple encryption types for local destinations
    - Next key and tagset for ECIES-X25519-AEAD-Ratchet
    - NTCP2 through SOCKS proxy
    - Throw error message if any port to bind is occupied
    - gzip parameter for UDP tunnels
    - Show ECIES-X25519-AEAD-Ratchet sessions and tags on the web console
    - Simplified implementation of gzip for no compression mode
    - Allow ECIES-X25519-AEAD-Ratchet session restart after 2 minutes
    - Added logrotate config for rpm package
    - Select peers for client tunnels among routers >= 0.9.36
    - Check ECIES flag for encrypted lookup reply
    - Streaming MTU size 1812 for ECIES-X25519-AEAD-Ratchet
    - Don't calculate checksum for Data message send through ECIES-X25519-AEAD-Ratchet
    - Catch network connectivity status for Windows
    - Stop as soon as no more transit tunnels during graceful shutdown for Android
    - RouterInfo gzip compression level depends on size
    - Send response to received datagram from ECIES-X25519-AEAD-Ratchet session
    - Update webconsole functional
    - Increased max transit tunnels limit
    - Reseeds list
    - Dropped windows support in cmake
    - Correct timestamp check for LeaseSet2
    - Encrypted leaseset without authentication
    - Change SOCKS proxy connection response for clients without socks5h support (#1336)
* Mon Apr 13 2020 Alexei Podvalsky <>
  - Update to 2.31.0:
    * NTCP2 through HTTP proxy
    * Publish LeaseSet2 for I2CP destinations
    * Show status page on main activity for android
    * Handle ECIESFlag in DatabaseLookup at floodfill
    * C++17 features for eligible compilers
    * Droped Websockets and Lua support
    * Send DeliveryStatusMsg for LeaseSet for
    * Keep sending new session reply until established for
    * Updated SSU log messages
    * Reopen SSU socket on exception
    * Security hardening headers in web console
    * Various web console changes
    * Various QT changes
    * NTCP2 socket descriptors leak
    * Race condition with router's identity in transport sessions
    * Not terminated streams remain forever
* Tue Mar 10 2020 Alexei Podvalsky <>
  - Update to 2.30.0:
    * Single threaded SAM
    * Experimental support of ECIES-X25519-AEAD-Ratchet crypto type
    * Minimal MTU size is 1280 for ipv6
    * Use unordered_map instead map for destination's sessions and
      tags list
    * Use std::shuffle instead std::random_shuffle
    * SAM is single threaded by default
    * Reseeds list
    * Correct termination of streaming destination
    * Extra ',' in RouterInfo response in I2PControl
    * SAM crash on session termination
    * Storage for Android 10
* Tue Oct 22 2019 Alexei Podvalsky <>
  - Update to 2.29.0:
    * Client auth flag for b33 address
    * Remove incoming NTCP2 session from pending list when established
    * Handle errors for NTCP2 SessionConfrimed send
    * SAM crash if invalid lookup address
    * Possible crash when UPnP enabled on shutdown
* Wed Aug 28 2019 Alexei Podvalsky <>
  - Update to 2.28.0:
    * RAW datagrams in SAM
    * Publishing encrypted LeaseSet2 with DH or PSH authentication
    * Ability to disable battery optimization for Android
    * Transport Network ID Check
    * Set and handle published encrypted flag for LeaseSet2
    * ReceiveID changes in the same stream
    * "\r\n" command terminator in SAM
    * Addressbook lines with signatures
* Thu Jul 04 2019 Alexei Podvalsky <>
  - Update to 2.27.0:
    * Support of PSK and DH authentication for encrypted LeaseSet2
    * Uptime is based on monotonic timer
    * BOB status command response
    * Correct NTCP2 port if NTCP is disabled
    * Flood encrypted LeaseSet2 with store hash
* Fri Jun 07 2019 Alexei Podvalsky <>
  - Update to 2.26.0:
    * HTTP method "PROPFIND"
    * Detection of external ipv6 address through the SSU
    * NTCP2 publishing depends on network status
    * ntcp is disabled by default, ntcp2 is published by default
    * Response to BOB's "list" command
    * ipv6 address is not longer NTCP's local endpoint's address
    * Reseeds list
    * HTTP_REFERER stripping in httpproxy (#823)
    * Check and handle incorrect BOB input
    * Ignore introducers for NTCP or NTCP2 addresses
    * RouterInfo check from NTCP2
* Fri May 10 2019 Alexei Podvalsky <>
  - Update to 2.25.0:
    * Create, publish and handle encrypted LeaseSet2
    * Support of b33 addresses
    * RedDSA key blinding
    * .b32.i2p addresses in jump links
    * ntcp2.addressv6 parameter
    * Allow HTTP headers without value
    * Set data directory from external storage path for Android
    * addresshelper support is configurable per tunnel
    * gradlew script for android build
    * Deletion of expired encrypted LeaseSet2 on floodfills
    * ipv6 fallback address
    * SSU incoming packets routing
* Sat Apr 13 2019 Alexei Podvalsky <>
  - Add startup option '--daemon' to i2pd.service (fix core dump on startup)
* Fri Mar 22 2019 Alexei Podvalsky <>
  - Update to 2.24.0:
    * Support of transient keys for LeaseSet2
    * Support of encrypted LeaseSet2
    * Recognize signature type 11 (RedDSA)
    * Support websocket connections over HTTP proxy
    * Ability to disable full addressbook persist
    * Don't load peer profiles if non-persistant
    * REUSE_ADDR for ipv6 acceptors
    * Reset eTags if addressbook can't be loaded
    * Build with boost 1.70
    * Filter out unspecified addresses from RouterInfo
    * Check floodfill status change
    * Correct SAM response for invalid key
    * SAM crash on termination for Windows
    * Race condition for publishing
    * Standard LeaseSet2 support
    * Ability to adjust timestamps through the NTP
    * Ability to disable peer profile persist
    * Request permission for android >= 6
    * Initial addressbook to android assets
    * Cancel graceful shutdown for android
    * Russian translation for android
    * Chacha20 and Poly1305 implementation
    * Eliminate extra copy of NTCP2 send buffers
    * Extract content of tunnel.d from assets on android
    * Removed name resolvers from transports
    * Update reseed certificates
    * LeaseSet published content verification
    * Exclude invalid LeaseSets from the list on a floodfill
    * Build for OpenWrt with openssl 1.1.1
* Fri Nov 09 2018 Alexei Podvalsky <>
  - Update to 2.22.0:
    * Multiple tunnel config files from tunnels.d folder
    * Fetch own RouterInfo upon SessionRequest for NTCP2
    * Faster XOR between AES blocks for non AVX capable CPUs
    * Fixed NTCP2 termination send
* Wed Oct 24 2018 Alexei Podvalsky <>
  - Drop i2pd-2.17.0-libs.patch
* Tue Oct 23 2018 Jan Engelhardt <>
  - Trim filler word from descriptions and update grammar.
* Tue Oct 23 2018 Alexei Podvalsky <>
  - Update to 2.21.1:
    * Handle I2NP messages longer than 32K
    * cost=13 for unpublished NTCP2 address
* Fri Oct 05 2018 Alexei Podvalsky <>
  - Update to 2.21.0:
    * Use EdDSA, x25519 and SipHash from openssl 1.1.1 if available
    * NTCP2 ipv6 incoming connections
    * Bandwidth classes 'P' and 'X' without 'O'
    * Support android api > 26
    * Update own RouterInfo if no SSU
    * Fixed NTCP address disappears if NTCP2 enabled
    * Show total number of destination's outgoing tags in the web
* Fri Aug 24 2018
  - Update to 2.20.0:
    * Full implementation of NTCP2
    * Provide assets for android
    * Some fix in web console
* Wed Jun 27 2018
  - Update to 2.19.0:
    * ECIES support for RouterInfo
    * HTTP outproxy authentication
    * AVX/AESNI runtime detection
    * Android build using gradle
    * Implementation of I2CP reconfigure
    * EdDSA for RouterInfo by default
    * Datagrams to websocks
    * Fixed tunnels reload
    * Fixed headers in webconsole
    * Correct SAM session name
    * Updated docker
    * Multiple changes for QT GUI
    * Initial implementation of NTCP2
    * Added I2PControl method "ClientServicesInfo"
  - Update i2pd-2.17.0-apparmor.patch > i2pd-2.19.0-apparmor.patch
* Wed Jan 31 2018
  - Update to 2.18.0:
    * Graceful shutdown as soon as no more transit tunnels
    * Show tunnel nicknames for I2CP destination in WebUI
    * Re-create HTTP and SOCKS proxy and shared local destination by tunnel reload
    * Fixed issues and timing for addressbook requests
    * Return correct code if pid file can't be created
    * Fixed build errors with boost 1.66
    * Use transient local destination by default if not specified
    * Check LeaseSet's signature before update
    * Fixed few race conditions for SAM
  - Drop i2pd-2.17.0-boost-1.66.patch (fixed))
* Thu Jan 18 2018
  - Rename the macros: USER > sysuser; GROUP > sysgroup
* Sat Jan 13 2018
  - Fix build with boost >= 1.66 (i2pd-2.17.0-boost-1.66.patch)



Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Dec 7 00:06:49 2021