openocd-0.10.0-lp152.3.6 RPM for ppc64le

From OpenSuSE Ports Leap 15.2 for ppc64le

The Open On-Chip Debugger (OpenOCD) provides debugging, in-system programming
and boundary-scan testing for embedded devices.  Various different boards,
targets, and interfaces are supported to ease development time.

Install OpenOCD if you are looking for an open source solution for hardware
debugging.

Provides

• openocd
• openocd(ppc-64)

Requires

• /bin/sh
• /bin/sh
• /bin/sh
• info
• info
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.17)(64bit)
• libftdi1.so.2()(64bit)
• libhidapi-hidraw.so.0()(64bit)
• libjaylink.so.0()(64bit)
• libjim.so.0.75()(64bit)
• libusb-0.1.so.4()(64bit)
• libusb-1.0.so.0()(64bit)
• openocd-data = 0.10.0
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsXz) <= 5.2-1
• udev
• udev

License

GPL-2.0

Changelog

* Sun Mar 19 2017 afaerber@suse.de
  - Drop deprecated --enable-ioutil and --enable-oocd_trace options
  - Sort and complement configure options
  - Add back tarball signature
* Fri Mar 17 2017 afaerber@suse.de
  - Update specfile for new libjaylink dependency
* Thu Mar 16 2017 opensuse@dstoecker.de
  - update to 0.10.0
    * many updates: have a look in the log file
    /usr/share/doc/packages/openocd/NEWS
* Thu Jun 11 2015 benoit.monin@gmx.fr
  - update to version 0.9.0:
    * jtag/drivers/stlink: fix SRST issue with stlink-v1
    * nrf51: refine and extend known devices table
    * server: avoid the tcl server crashing when there is no target
    * manual: fix usb_blaster_pin command syntax and description
    * manual: reorder flash driver info
    * manual: remove the lists of config files
  - point the source URL to sourceforge
  - add source archive signature and author keyring
  - add missing install_info_prereq as post and preun requires
  - remove -n from %setup: unnecessary
  - call %udev_rules_update instead of udevadm directly in post
    and postun: fix local build
  - call %install_info_delete in preun, not postun:
    fix scriptlet failed warning
* Sat Apr 25 2015 afaerber@suse.de
  - Update to v0.9.0-rc1
    * Drop fix-jim_cmdproc.patch (fixed upstream)
    * Drop commented-out use of ./bootstrap script that doesn't exist
  - Reorder adapter config options by configure.ac order
    * Fix misspelled config option arm-jtag-ew -> armjtagew
  - Explicitly enable usb-blaster-2, usbprog
  - Explicitly enable parport for x86 and bcm2835gpio for ARM
* Mon Oct 06 2014 matwey.kornilov@gmail.com
  - Use libusb-compat instead of libusb0
* Tue May 13 2014 ralf@rdoering.net
  - Update to openOCD 0.8 instead of git
  - Build with external jimtcl only for factory, use included
    jimtcl for openSUSE 13.1 and older
  - make it build with included jimtcl, so it builds for
    openSUSE 12.3 and 13.1
* Sat May 10 2014 matwey.kornilov@gmail.com
  - Use spec_cleaner
* Sat Apr 26 2014 matwey.kornilov@gmail.com
  - Drop not needed comments
* Sat Apr 19 2014 matwey.kornilov@gmail.com
  - Provide COPYING file with the license.

Files

/usr/bin/openocd
/usr/lib/udev/rules.d/60-openocd.rules
/usr/share/doc/packages/openocd
/usr/share/doc/packages/openocd/AUTHORS
/usr/share/doc/packages/openocd/COPYING
/usr/share/doc/packages/openocd/ChangeLog
/usr/share/doc/packages/openocd/NEWS
/usr/share/doc/packages/openocd/README
/usr/share/doc/packages/openocd/libdcc
/usr/share/doc/packages/openocd/libdcc/README
/usr/share/doc/packages/openocd/libdcc/dcc_stdio.c
/usr/share/doc/packages/openocd/libdcc/dcc_stdio.h
/usr/share/doc/packages/openocd/libdcc/example.c
/usr/share/info/openocd.info-1.gz
/usr/share/info/openocd.info-2.gz
/usr/share/info/openocd.info.gz
/usr/share/man/man1/openocd.1.gz

Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Apr 9 12:13:28 2024