Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

pcsc-ccid-1.4.28-lp150.1.1 RPM for armv7hl

From OpenSuSE Ports Leap 15.0 for armv7hl

Name: pcsc-ccid Distribution: openSUSE Leap 15.0
Version: 1.4.28 Vendor: openSUSE
Release: lp150.1.1 Build date: Wed May 9 03:06:29 2018
Group: Productivity/Security Build host: armbuild02
Size: 1477851 Source RPM: pcsc-ccid-1.4.28-lp150.1.1.src.rpm
Summary: PCSC Driver for CCID Based Smart Card Readers and GemPC Twin Serial Reader
This package contains a generic USB CCID (Chip/Smart Card Interface
Devices) driver.

This driver is meant to be used with the PCSC-Lite daemon from the
pcsc-lite package.






* Sun Oct 15 2017
  - Updated to version 1.4.28
    * Add support of
      Athena IDProtect Flash
      Elatec TWN4/B1.06/CPF3.05/S1SC1.32/P (Beta 3)
      HID Global OMNIKEY 5122 Dual
      HID Global OMNIKEY 5122 Smartcard Reader
      IIT E.Key Crystal-1
      KRONEGGER Micro Core Platform
      KRONEGGER NFC blue Reader Platform
      Ledger Nano S
      REINER SCT cyberJack RFID standard
      REINER SCT cyberJack one
      SafeNet eToken 5300
      Unicept GmbH AirID USB Dongle
      Watchdata USB Key
      mCore SCard-Reader
    * Disabled readers
      Jinmuyu Electronics Co., Ltd. MR800
    * Fix non-pinpad HID global devices
    * udev rules
      allow rule overwrite
      disable USB autosuspend on C3PO LTC31 v1 reader
    * some minor improvements
* Mon May 22 2017
  - Updated to version 1.4.27
    * Add support of
      ACS ACR1255U-J1
      ACS CryptoMate (T2)
      ANCUD CCID USB Reader & RNG
      DUALi DE-620 Combi
      FT CCID
      FT CCID KB
      FT U2F CCID KB
      HID Global OMNIKEY 5422 Smartcard Reader
      InfoThink IT-102MU Reader
      Kapsch TrafficCom USB SAM reader
      MK Technology KeyPass S1
      Mulann PVT
      Regula RFID Reader
      Spyrus Inc PocketVault P-3X
      Unicept GmbH AirID USB
    * Add Microchip SEC1210 UART support (when connected on a serial port)
    * Add Zero Length Packet (ZLP) support for Gemalto IDBridge CT30 and K30
      enable the patch using ./configure --enable-zlp
    * Add support of HID Omnikey 5422 as multi slot reader (for macOS)
    * Escape command: signals buffer overflow instead of silently
      truncating the buffer
    * Fix a bug with multi readers and pcscd uses hotplug_libusb
      (not the recommended configuration)
    * Some minor improvements
* Sat Jan 07 2017
  - Updated to version 1.4.26
    * Add support of
      Bit4id Digital DNA Key
      Bit4id tokenME FIPS v3
      INGENICO Leo
      appidkey GmbH ID60-USB
    * PowerOn: the default algorithm is now 5V then 1.8V then 3V then fail.
      It is still possible to change the initial voltage in the
      Info.plist file.
      Now, in any case, all the values are tried before failing.
    * Negotiate maximum baud rate when bNumDataRatesSupported = 0
    * Some minor improvements
* Mon Oct 03 2016
  - Updated to version 1.4.25
    * Add support of
      Aladdin R.D. JaCarta (idProduct: 0x0402)
      Broadcom Corp 5880 (idProduct: 0x5832)
      Broadcom Corp 5880 (idProduct: 0x5833)
      Broadcom Corp 5880 (idProduct: 0x5834)
      ESMART Token GOST X2 ET1020-A
      Feitian VR504 VHBR Contactless & Contact Card Reader
      Feitian bR500
      Gemalto K50
      appidkey GmbH ID100-USB  SC Reader
      appidkey GmbH ID50 -USB
    * Remove suport of
      Broadcom Corp 5880 (idProduct: 0x5800)
      Broadcom Corp 5880 (idProduct: 0x5805)
      KEBTechnology KONA USB SmartCard
    * Fix crash with GemCore Pos Pro and GemCore Sim Pro
    * Some minor improvements
* Mon May 30 2016
  - Updated to version 1.4.24
    * Add support of
      Generic USB Smart Card Reader
      Giesecke & Devrient GmbH StarSign CUT S
      HID AVIATOR Generic
    * better support of Elatec TWN4 SmartCard NFC
    * better support of SCM SCL011
    * fix SCARD_ATTR_VENDOR_IFD_SERIAL_NO attribute size
    * fix a race condition on card events with multiple readers
    * Some minor improvements
* Thu Apr 21 2016
  - Updated to version 1.4.23
    * Add support of
      ACS ACR3901U ICC Reader
      Alcor Micro AU9560
      Cherry SmartTerminal XX44
      HID Global OMNIKEY 3x21 Smart Card Reader
      HID Global OMNIKEY 5022 Smart Card Reader
      HID Global OMNIKEY 6121 Smart Card Reader
      IonIDe Smartcard Reader reader
      KACST HSID Reader
      KACST HSID Reader Dual Storage
      KACST HSID Reader Single Storage
    * Remove support of
      VMware Virtual USB CCID
    * Fix a busy loop consuming 100% of CPU for some composite USB devices
      impacted readers: Yubico Yubikey NEO U2F+CCID and Broadcom BCM5880
    * Remove support of (unused) option DRIVER_OPTION_RESET_ON_CLOSE
    * log libusb error name instead of decimal value
    * Some minor improvements
* Sun Jan 10 2016
  - Updated to version 1.4.22
    * Add support of
      Aktiv Rutoken PINPad 2
      Aladdin R.D. JC-WebPass (JC600)
      Aladdin R.D. JCR-770
      Aladdin R.D. JaCarta
      Aladdin R.D. JaCarta Flash
      Aladdin R.D. JaCarta LT
      Aladdin R.D. JaCarta U2F (JC602)
      Athena ASEDrive IIIe Combo Bio PIV
      Athena ASEDrive IIIe KB Bio PIV
      GEMALTO CT1100
      GEMALTO K1100
      Hitachi, Ltd. Hitachi Biometric Reader
      Hitachi, Ltd. Hitachi Portable Biometric Reader
      Nitrokey Nitrokey Storage
      Thursby Software Systems, Inc. TSS-PK7
      Thursby Software Systems, Inc. TSS-PK8
    * Patch for Microchip SEC1110 reader on Mac OS X (card events notification)
    * Patch for Cherry KC 1000 SC (problem was with a T=1 card and case 2 APDU)
    * Fix support of FEATURE_MCT_READER_DIRECT for the Kobil mIDentity visual reader
    * Set timeout to 90 sec for PPDU (Pseudo APDU) commands. This
      change allows the use of a Secure Verify command sent as a PPDU
      through SCardTransmit().
    * Fix a crash when reader reader initialization failed
    * Fix initialization bug with Gemalto Pinpad reader on Mac OS X
    * Some minor bugs fixed
* Sun Oct 25 2015
  - Updated to version 1.4.21
    * Add support of
      ACS ACR1252 Dual Reader
      Chicony HP USB Smartcard CCID Keyboard JP
      Chicony HP USB Smartcard CCID Keyboard KR
      FT ePass2003Auto
      Feitian bR301 BLE
      Feitian iR301 (ProductID 0x0619)
      Feitian iR301 (ProductID 0x061C)
      Identiv @MAXX ID-1 Smart Card Reader
      Identiv @MAXX Light2 token
      Identiv CLOUD 2980 F Smart Card Reader
      Identiv Identiv uTrust 4701 F Dual Interface Reader
      Identiv SCR3500 A Contact Reader
      Identiv SCR3500 B Contact Reader
      Identiv SCR35xx USB Smart Card Reader
      Identiv uTrust 2900 R Smart Card Reader
      Identiv uTrust 2910 R Smart Card Reader
      Identiv uTrust 2910 R Taglio SC Reader
      Identiv uTrust 3512 SAM slot Token
      Identiv uTrust 3522 embd SE RFID Token
      Identiv uTrust 3700 F CL Reader
      Identiv uTrust 3701 F CL Reader
      Identive Identive CLOUD 4000 F DTC
      Liteon HP SC Keyboard - Apollo (Liteon)
      Liteon HP SC Keyboard - Apollo JP (Liteon)
      Liteon HP SC Keyboard - Apollo KR (Liteon)
      Nitrokey Nitrokey HSM
      Nitrokey Nitrokey Pro
      Nitrokey Nitrokey Start
      Rocketek RT-SCR1
      WatchCNPC USB CCID Key
    * Remove support of
      Crypto Stick Crypto Stick v1.4 is an old version of Nitrokey Nitrokey Pro
      Free Software Initiative of Japan Gnuk Token is an old version
      of Nitrokey Nitrokey Start
    * Add Feitain R502 dual interface (composite) reader on Mac OS X
    * display a human readable version of the error code returned by libusb
    * Mac OS X: wait until libusb/the reader is ready
    * some minor bugs fixed
* Wed Aug 05 2015
  - Updated to version 1.4.20
    * Add support of
      ACS ACR1251 Dual Reader
      Access IS NFC Smart Module
      BIFIT iToken
      BLUTRONICS BLUDRIVE II CCID (idProduct: 0x1079)
      Generic MultiCard Device
      NXP Pegoda 2 N
      SafeNet eToken 5100
      SafeNet eToken 7300
      Yubico Yubikey 4 CCID
      Yubico Yubikey 4 OTP+CCID
      Yubico Yubikey 4 OTP+U2F+CCID
      Yubico Yubikey 4 U2F+CCID
    * Depends on libusb version 1.0.9 instead of 1.0.8
    * The O2 Micro Oz776 reader only supports 9600 bps
  - spec file cleanup
  - remove pgp validation from build (now handled via OBS)
* Wed May 13 2015
  - Updated to version 1.4.19
    * Add support of
      AK910 CKey (idProduct 0x0001)
      AK910 CKey (idProduct 0x0011)
      AK910 IDONE
      Broadcom Corp 5880 (idProduct: 0x5804)
      CASTLES EZCCID Smart Card Reader
      Cherry KC 1000 SC
      Cherry KC 1000 SC Z
      Cherry KC 1000 SC/DI
      Cherry KC 1000 SC/DI Z
      Cherry TC 1300
      Chicony USB Smart Card Keyboard
      Elatec TWN4 SmartCard NFC
      Feitian 502-CL
      Feitian eJAVA Token
      FujitsuTechnologySolutions GmbH Keyboard KB100 SCR
      FujitsuTechnologySolutions GmbH Keyboard KB100 SCR eSIG
      Hewlett-Packard HP lt4112 Gobi 4G Module
      Identive SCT3522CC token
      OMNIKEY AG 6121 USB mobile
      PIVKey T800
      REINER SCT tanJack Bluetooth
      Watchdata USB Key
    * Remove ZLP patch for Gemalto IDBridge CT30 and K30. The patch was
      causing problems with the K50.  A new reader firmware (version F)
      solved the problem so the patch is no more needed.
    * Fix a memory leak in an error path
    * some minor bugs removed
* Sat Sep 13 2014
  - Updated to version 1.4.18
    * Add support of
      Cherry Cherry TC 1100
      Cherry Smart Card Reader USB
      Cherry Smartcard Keyboard G87-1xx44
      FujitsuTechnologySolutions GmbH Keyboard KB SCR2
      Lenovo Lenovo USB Smartcard Keyboard
      Yubico Yubikey NEO OTP+U2F+CCID
      Yubico Yubikey NEO U2F+CCID
      eID_R6 001 X8
    * fix support of Omnikey CardMan 3121
    * reduce memory consumed when configured with --enable-embedded
    * prepare the port to UEFI
* Thu Jun 12 2014
  - Updated to version 1.4.17
    * Add support of
      Feitian R502
      Free Software Initiative of Japan Gnuk Token
      German Privacy Foundation Crypto Stick v2.0
      HID Global veriCLASS Reader
      HID OMNIKEY 5025-CL
      Identive Technologies Multi-ISO HF Reader - USB
      OMNIKEY 5421
      OMNIKEY AG 3121 USB
      udea MILKO V1.
    * Fix support of O2 Micro Oz776. The reader is limited to 9600 bps
    * some minor bugs removed
* Sun Mar 23 2014
  - Updated to version 1.4.16
    * Add support of
      Crypto Stick Crypto Stick v1.4
      Hewlett Packard USB Smartcard CCID Keyboard
      INSIDE Secure VaultIC 405 Smart Object
      INSIDE Secure VaultIC 441 Smart Object
      Microchip SEC1110
      Microchip SEC1210
      Watchdata W5181
      The Gemalto pinpad reader sends a VERIFY command with no PIN value
      in order to retreive the remaining retries from the card. Some
      cards (like the OpenPGP card) do not support this.
      It is now possible to disable this behavior from the Gemalto Pinpad
      and Covadis VĂ©ga Alpha.
    * Add support of WTX received before SW during Secure Pin Entry Verify
      The Swiss health care card sends a WTX request before returning
      the SW code. If the reader is in TPDU and the card is in T=1 the
      driver must manage the request itself.
  - added alternative key (E8F9C57E) to keyring
* Sat Feb 15 2014
  - Updated to version 1.4.15
    * Add support of
      Feitian bR301
      Gemalto CR30 reader in serial communication
      Gemalto Ezio Shield Pro SC
      IIT E.Key Almaz-1C
      the command length after pcsc-lite 1.8.9 (October 2013) changed
      the PCSC/reader.h header
    * Add specific PIN min (0) & max (25) sizes for SmartTerminal ST-2xxx
    * Do not get the data rates if bNumDataRatesSupported = 0
    * Support Gemalto features for pinpad readers MinimumPINSize,
      MaximumPINSize and bEntryValidationCondition are fetched from the
      reader firmware
    * disable (broken) pinpad for Fujitsu SmartCase KB SCR eSIG
    * some minor bugs removed
* Tue Nov 26 2013
  - Updated to version 1.4.14
    * Add support of
      Gemalto GemCore SIM Pro firmware 2.0 (using USB)
    * report FEATURE_IFD_PIN_PROPERTIES only for pinpad readers
    * Generalize the management of (old) readers with bDeviceClass = 0xFF
    * some minor bugs removed
* Thu Oct 10 2013
  - Updated to version 1.4.13
    * Add support of
      Access IS ePassport Reader
      Planeta RC700-NFC CCID
    * Add support of Windows value for CM_IOCTL_GET_FEATURE_REQUEST
      Windows uses 0x313520 for SCARD_CTL_CODE(3400)
      pcsc-lite uses 0x42000D48 for SCARD_CTL_CODE(3400)
      RDP aplications (like rdesktop) will convert SCardControl()
      commands from a Windows application (so using 0x313520) to pcsc-lite.
    * fix multi-slot support for card movement notification
    * some minor bugs removed
* Tue Aug 13 2013
  - Updated to version 1.4.12
    * Add support of
      HID OMNIKEY 5127 CK
      HID OMNIKEY 5326 DFR
      HID OMNIKEY 5427 CK
      Ingenico WITEO USB Smart Card Reader (Base and Badge)
      SecuTech SecuTech Token
    * Add support of card movement notifications for multi-slot readers
    * Check libusb is at least at version 1.0.8
    * Get the serialconfdir value from pcsc-lite pkg config instead of
      using $(DESTDIR)/$(sysconfdir)/reader.conf.d/ if not specified
      (pcsc-lite does not provide that information yet so the value
      is set manually
    * some minor bugs removed
* Wed Jun 12 2013
  - Updated to version 1.4.11
    * Add support of
      Gemalto IDBridge CT30
      Gemalto IDBridge K30
      SCM Microsystems Inc. SCL010 Contactless Reader
      SCM Microsystems Inc. SDI011 Contactless Reader
      THRC reader
    * Better management of time extension requests
    * parse: better support of devices with bInterfaceClass = 0xFF
    * udev rule file: Remove setting group to pcscd, remove support
      of Linux kernel < 2.6.35 for auto power up management
    * some minor bugs removed
* Sun Apr 21 2013
  - Updated to version 1.4.10
    * Add support of
      ACS APG8201 USB Reader with PID 0x8202
      GIS Ltd SmartMouse USB
      Gemalto IDBridge K3000
      Identive CLOUD 2700 F Smart Card Reader
      Identive CLOUD 2700 R Smart Card Reader
      Identive CLOUD 4500 F Dual Interface Reader
      Identive CLOUD 4510 F Contactless + SAM Reader
      Identive CLOUD 4700 F Dual Interface Reader
      Identive CLOUD 4710 F Contactless + SAM Reader
      Inside Secure AT90SCR050
      Inside Secure AT90SCR100
      Inside Secure AT90SCR200
      SCR3310-NTTCom USB SmartCard Reader
      SafeTech SafeTouch
      SpringCard H512 Series
      SpringCard H663 Series
      SpringCard NFC'Roll
      Yubico Yubikey NEO CCID
      Yubico Yubikey NEO OTP+CCID
    * Add support of time extension for Escape commands
* Wed Jan 16 2013
  - Updated to version 1.4.9
    * Add support of
      Aktiv Rutoken PINPad In
      Aktiv Rutoken PINPad Ex
      REINER SCT cyberJack go
    * Info.plist: Correctly handle reader names containing &
* Wed Jan 09 2013
  - Verify GPG signature.
* Thu Oct 18 2012
  - Fix build with new udev rules directory location.
* Mon Oct 08 2012
  - Updated to version 1.4.8:
    * Add support of
      SCR3310-NTTCom USB (was removed in version 1.4.6)
      Inside Secure VaultIC 420 Smart Object
      Inside Secure VaultIC 440 Smart Object
    * Wait up to 3 seconds for reader start up
    * Add support of new PC/SC V2 part 10 properties:
    * Use helper functions from libPCSCv2part10 to parse the
      PC/SC v2 part 10 features
* Tue Jun 26 2012
  - Updated to version 1.4.7:
    * Add support of
      ACS ACR101 ICC Reader
      ACS CryptoMate64
      Alcor Micro AU9522
      Bit4id CKey4
      Bit4id cryptokey
      Bit4id iAM
      Bit4id miniLector
      Bit4id miniLector-s
      CCB eSafeLD
      Gemalto Ezio Shield Branch
      KOBIL Systems IDToken
      NXP PR533
    * KOBIL Systems IDToken special cases:
      Give more time (3 seconds instead of 2) to the reader to answer
      Hack for the Kobil IDToken and Geman eID card. The German eID
      card is bogus and need to be powered off before a power on
      Add Reader-Info-Commands special APDU/command
    - Manufacturer command
    - Product name command
    - Firmware version command
    - Driver version command
    * Use auto suspend for CCID devices only (Closes Alioth bug
      [#313445] "Do not activate USB suspend for composite devices:
    * Fix some error management in the T=1 TPDU state machine
    * some minor bugs removed
    * some minor improvements added
  - do not call bootstrap since autoconf requirement is bleeding edge
    and only works on Factory/12.2 - also seems to be unnecessary
* Sun Apr 15 2012
  - Updated to version 1.4.6:
    * Add support of Avtor SC Reader 371, Avtor SecureToken,
      DIGIPASS KEY 202, Fujitsu SmartCase KB SCR eSIG,
      Giesecke & Devrient StarSign CUT,
      Inside Secure VaultIC 460 Smart Object,
      Macally NFC CCID eNetPad reader, OmniKey 6321 USB,
      SCM SDI 011, Teridian TSC12xxF, Vasco DIGIPASS KEY 101
    * Remove support of readers without a USB CCID descriptor file
      0x08E6:0x34C1:Gemalto Ezio Shield Secure Channel
      0x08E6:0x34C4:Gemalto Ezio Generic
      0x04E6:0x511A:SCM SCR 3310 NTTCom
      0x0783:0x0008:C3PO LTC32 USBv2 with keyboard support
      0x0783:0x9002:C3PO TLTC2USB
      0x047B:0x020B:Silitek SK-3105
    * Disable SPE for HP USB CCID Smartcard Keyboard. The reader is
      bogus and unsafe.
    * Fix a problem with ICCD type A devices. We now wait for device
    * Secure PIN Verify and PIN Modify: set the minimum timeout to
      90 seconds
    * Add support of wIdVendor and wIdProduct properties
    * Add support of dwMaxAPDUDataSize
    * Add support of Gemalto firmware features
    * some minor bugs removed
* Fri Dec 02 2011
  - add automake as buildrequire to avoid implicit dependency
* Mon Oct 17 2011
  - Updated to version 1.4.5:
    * Add support of Alcor Micro AU9540, Ubisys 13.56MHz RFID (CCID),
      BIFIT USB-Token iBank2key, BIFIT iBank2Key, Gemalto Ezio Shield
      PinPad reader, Gemalto SA .NET Dual, Precise Sense MC reader
      (with fingerprint), SDS DOMINO-Key TWIN Pro
    * Add support of bPPDUSupport and FEATURE_CCID_ESC_COMMAND
      not the vendor name and version of the driver but of the IFD:
      InterFace Device i.e. the smart card reader.  We then return the
      USB iManufacturer string as SCARD_ATTR_VENDOR_NAME and USB
    * reduce binary size by removing unused features from simclist
    * Fix some warnings reported by Coverity
* Wed May 18 2011
  - Updated to version 1.4.4:
    * Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio
      Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio
    * Activate USB automatic power suspend. The Linux kernel should
      power off the reader automatically if it is not used (pcscd is not
    * Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines
    * Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011,
      Feitian ePass2003 readers
    * use :libudev: instead of :libhal: naming scheme
    * Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch
      and the associated documentation.
    * the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus
      so disable it
    * Add support of Feitian SCR310 reader (also known as 301v2), ACS
      APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave
      Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200,
      Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers
    * Add back support of "bogus" Oz776, REINER SCT and BLUDRIVE II
    * disable use of interrupt card events for multi slots readers
* Wed Feb 16 2011
  - Added support for internal reader in HP laptops
* Wed Jan 05 2011
  - Updated to version 1.4.1:
    * Security fix (bnc#661000, CVE-2010-4530).
    * Migrated to libusb-1_0.
    * udev support.
    * Compatible with pcsc-lite-1.6.
    * See ChangeLog for details.
* Wed Aug 05 2009
  - Updated to version 1.3.11:
    * Incompatible change: Remove support of Reiner-SCT cyberJack
      pinpad(a) on request of Reiner-SCT. Use pcsc-cyberjack instead.
    * Should work: Panasonic USB Smart Card Reader 7A-Smart, ATMEL
      AT91SC192192CT-USB, Alcor Micro SCR001, Aktiv Rutoken ECP,
      Synnix STD200, more Neowave Weneo tokens, Feitian SCR301
      Raritan D2CIM-DVUSB VM/CCID
    * New known firmware: Kobil EMV CAP, ACS ACR122U-WB-R with bogus
      firmware < 2.06
    * Broadcom 5880 should work a bit better
    * Fixes for GemProx DU/SU and hacks for other Gemalto readers
    * SCM SCL010 Contactless Reader is not supported
    * Add support of FEATURE_MCT_READERDIRECT. Now only on the Kobil
      TriB@nk reader.
    * Support --disable-class argument to build a NON class driver.
    * HAL support fixes.
    * Add support of PIN_PROPERTIES_STRUCTURE structure and
    * It is possible to configure composite devices to be seen as
    * Other fixes, improvement and updates.
* Tue Apr 07 2009
  - Updated to version 1.3.10:
    * Added a hack to support the bogus OpenGPG card.
    * Should work: Precise Biometrics 200 MC, Precise Biometrics 250
      MC, SafeNet IKey4000 used in different device, Atmel
      AT98SC032CT, Neowave Weneo, MSI StarReader SMART, VMware Virtual
      USB CCID reader, ACS ACR122U PICC Interface, HP MFP Smart Card
      Reader, KONA USB SmartCard, SpringCard CrazyWriter, CSB6 Basic,
      CSB6 Secure, CSB6 Ultimate, EasyFinger Standard, EasyFinger
      Ultimate and Prox'N'Roll, Atmel AT91SO, Cherry SmartTerminal
      ST-1200USB, Aladdin eToken PRO USB 72K Java.
    * Differentiate between KOBIL mIDentity M and XL.
    * Known readers: SpringCard Prox'N'Roll, CSB6 Basic, EasyFinger
      Ultimate, CSB6 Ultimate, EasyFinger Standard, CrazyWriter, CSB6
      Secure, Pro-Active CSB6 Ultimate is renamed SpringCard CSB6
    * Unsupported: Broadcom 5880, jNet Technology jToken s1.
    * Disabled support of the contcatless part of SDI010 and SCR331DI.
    * Avoid a "Duplicate frame detected" error.
    * Use a very long timeout for PowerUp since the card can be very
      slow to send the full ATR (up to 30 seconds at 4 MHz)
    * Driver will work in a multi-reader configuration.
  - Use modalias supplements instead of eID issuer locales.
  - Require pcsc-lite.
  - Removed custom hotplug support. Now integrated in pcsc-lite.



Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Nov 9 10:39:09 2021