| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: yast2-network | Distribution: SUSE Linux Enterprise 15 |
| Version: 4.4.45 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: 150400.1.8 | Build date: Sun May 8 09:18:18 2022 |
| Group: System/YaST | Build host: sheep23 |
| Size: 1116590 | Source RPM: yast2-network-4.4.45-150400.1.8.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://github.com/yast/yast-network | |
| Summary: YaST2 - Network Configuration | |
This package contains the YaST2 component for network configuration.
GPL-2.0-only
* Fri Mar 11 2022 igonzalezsosa@suse.com
- Display the network configuration in the AutoYaST user interface
(see bsc#1197019).
- 4.4.45
* Wed Mar 09 2022 kanderssen@suse.com
- Write NetworkManager s390 options to the ethernet section instead
of the connection one (bsc#1196582)
- 4.4.44
* Thu Mar 03 2022 kanderssen@suse.com
- Added connection config writers for Qeth and Hipersocket
devices (bsc#1196582)
- 4.4.43
* Fri Feb 25 2022 kanderssen@suse.com
- Revert last change going back to skip DHCP setup completely if
the network is already configured through iBFT (bsc#1194911)
- 4.4.42
* Thu Feb 24 2022 kanderssen@suse.com
- Related to bsc#1194911:
- Skip iBFT interfaces as DHCP candidates but configure DHCP if
there is no active and ifcfg file configured interface
- 4.4.41
* Tue Feb 22 2022 kanderssen@suse.com
- Fixed active configuration detection (bsc#1196276, bsc#1194911)
- 4.4.40
* Thu Feb 10 2022 kanderssen@suse.com
- Related to (bsc#1194911)
- During installation skip the network configuration dialog when
network is configured with iBFT.
4.4.39
* Wed Feb 09 2022 kanderssen@suse.com
- During installation, do not configure DHCP if there is some
active interface configured by iBFT (bsc#1194911)
- 4.4.38
* Fri Feb 04 2022 kanderssen@suse.com
- Fixed interfaces overview help (bsc#1195155)
- 4.4.37
* Tue Feb 01 2022 mfilka@suse.com
- jsc#SLE-22015
- renamed slaves CLI option to conform to inclusive naming:
yast lan add name=bond0 bond_ports=eth0 eth1 bootproto=dhcp
- the "slaves=" option stays for backward compatibility
- 4.4.36
* Wed Jan 26 2022 mfilka@suse.com
- jsc#SLE-22015
- make the code conform to inclusive naming, most masters and
slaves are gone. Kept only where makes sense - interface to
sysconfig
- "slave" was replaced by "port" as this naming is already used
by kernel code. "Master" was replaced by directly mentioning
"bond" (device) or "parent" in areas where the code is somehow
shared with e.g., bridge. Devices are not "enslaved" anymore,
but mostly "included".
- 4.4.35
* Tue Jan 25 2022 igonzalezsosa@suse.com
- Use Package module instead of PackageSystem (bsc#1194886).
- 4.4.34
* Fri Jan 21 2022 lslezak@suse.cz
- Unify YaST module mocking in unit tests (related to bsc#1194784)
- 4.4.33
* Mon Dec 06 2021 jreidinger@suse.com
- Prepare code for ruby3 (bsc#1193192)
- 4.4.32
* Wed Nov 10 2021 kanderssen@suse.com
- Fixed interfaces table description for s390 Group devices
(bsc#1192560).
- 4.4.31
* Wed Nov 10 2021 jlopez@suse.com
- Replace calls to dropped method InterfacesTable#friendly_name
(bsc#1192560).
- 4.4.30
* Thu Nov 04 2021 kanderssen@suse.com
- AutoYaST
- When the interface section contains the "device" (deprecated)
and "name" elements then use the "device" as the "name" and the
"name" as the "description". (bsc#1192270)
- Add the "description" element to the interface section.
- 4.4.29
* Wed Nov 03 2021 kanderssen@suse.com
- Do not crash when checking if a virtual interface is connected
(bsc#1192183, bsc#1192270).
- 4.4.28
* Wed Oct 13 2021 kanderssen@suse.com
- Fix reading of the routing configuration (bsc#1191589)
- 4.4.27
* Mon Sep 27 2021 kanderssen@suse.com
- Do not crash when the interfaces table contains a not configured
one (bnc#1190645, bsc#1190915)
- Fix the shown description using the interface friendly name when
it is empty (bsc#1190933)
- 4.4.26
* Thu Sep 23 2021 igonzalezsosa@suse.com
- Consider aliases sections as case insensitive (bsc#1190739).
- 4.4.25
* Wed Sep 22 2021 mfilka@suse.com
- bnc#1190645
- display user defined device name in the devices overview
- 4.4.24
* Tue Sep 07 2021 kanderssen@suse.com
- Add support for reading the default NTP servers from the control
file in case of defined (bsc#1180699)
- 4.4.23
* Fri Jul 30 2021 kanderssen@suse.com
- Fix write of device routes. (bsc#1188908)
- 4.4.22
* Tue Jul 20 2021 kanderssen@suse.com
- Do not crash when the aliases defined in the AutoYaST profile
are not defined as a map (bsc#1188344)
- 4.4.21
* Thu Jul 01 2021 mfilka@suse.com
- bnc#1185936
- do not crash with internal error when a sysctl file is
corrupted
- 4.4.20
* Fri Jun 25 2021 ancor@suse.com
- Adapted to the new API of Y2Issues (related to jsc#PM-2620 and
bsc#1166743)
- 4.4.19
* Thu Jun 17 2021 kanderssen@suse.com
- Support 'boot' and 'on' as aliases for the 'auto' startmode
(bsc#1186910)
- 4.4.18
* Thu Jun 17 2021 kanderssen@suse.com
- Fallback to NetworkManager if wicked is the backend selected but
it is not installed at the end of the installation (bsc#1187423)
- 4.4.17
* Tue Jun 15 2021 igonzalezsosa@suse.com
- Fix the Comment entry in the desktop file so the tooltip
in the control center is properly translated (bsc#1187270).
- 4.4.16
* Tue Jun 08 2021 kanderssen@suse.com
- Use the linuxrc proxy settings for the HTTPS and FTP proxies
(bsc#1185016)
- 4.4.15
* Fri Jun 04 2021 kanderssen@suse.com
- Adopt the new YaST2::Equatable mixin in order to fix possible
errors when comparing objects (related to bsc#1186082)
- 4.4.14
* Mon May 31 2021 mfilka@suse.com
- bnc#1185524
- do not crash at the end of installation when storing wifi
configuration for NetworkManager at the target
- 4.4.13
* Fri May 28 2021 kanderssen@suse.com
- Allow to modify the network IP forwarding configuration defining
the defaults in the control file (bsc#1186280)
- 4.4.12
* Mon May 24 2021 kanderssen@suse.com
- Fix error when determining the removed interfaces in order to
remove their associated routes too (bsc#1186082)
- 4.4.11
* Wed May 12 2021 kanderssen@suse.com
- Write IP addresses in order preventing an alias to set the
primary IP address (bsc#1185967)
- 4.4.10
* Wed May 05 2021 kanderssen@suse.com
- Allow the user to disable the network service during installation
or autoinstallation selecting a 'none' backend (bsc#1183886)
- 4.4.9
* Wed Apr 28 2021 kanderssen@suse.com
- Omit hidden networks from the list of wireless networks to be
selected preventing the dialog to crash (bsc#1185372)
- 4.4.8
* Tue Apr 27 2021 mfilka@suse.com
- bsc#1185338
- Dropped LanItems, replaced by network-ng
- 4.4.7
* Thu Apr 22 2021 igonzalezsosa@suse.com
- Do not crash when the BOOTPROTO or STARTMODE are missing or
invalid (bsc#1181295).
- 4.4.6
* Thu Apr 22 2021 kanderssen@suse.com
- bsc#1185106
- Initialize correctly the netmask when using the static bootproto
without an IP address defined.
- Fix MTU write when using wicked.
* Thu Apr 22 2021 kanderssen@suse.com
- Do not crash when modifying a virtual interface and checking if
it is hotplug (bsc#1184623, bsc#1185106)
- 4.4.5
* Wed Apr 14 2021 kanderssen@suse.com
- Do not require a MAC address when activating a qeth device
with layer2 support (bsc#1184474).
- 4.4.4
* Tue Apr 13 2021 kanderssen@suse.com
- Do not crash when checking if an interface is a hotplug one and
it is not present (bsc#1184623)
- 4.4.3
* Fri Apr 09 2021 kanderssen@suse.com
- bsc#1181956
- Omit empty values or the '0.0.0.0' IPADDR when writing ifcfg
files.
- Do not write empty ifroute files.
- 4.4.2
* Thu Apr 08 2021 igonzalezsosa@suse.com
- Display the network configuration in the installation summary
screen even if NetworkManager is the selected backend
(bsc#1181354).
- 4.4.1
* Wed Apr 07 2021 igonzalezsosa@suse.com
- Write DNS servers to NetworkManager connection files when using
a static configuration (bsc#1181701).
- 4.4.0
* Tue Apr 06 2021 mfilka@suse.com
- Drop isCurrentDHCP and isCurrentHotplug methods from LanItems.
* Mon Apr 05 2021 dgonzalez@suse.com
- Do not show the "Abort" button when the inst_lan client is called
from another installation step (bsc#1183586).
* Mon Mar 29 2021 igonzalezsosa@suse.com
- Use the ESSID to name the NetworkManager configuration files
for wireless networks (bsc#1183733).
- 4.3.63
* Thu Mar 18 2021 kanderssen@suse.com
- AutoYaST: Write NetworkManager configuration according to the
profile (bsc#1181701)
- 4.3.62
* Wed Mar 17 2021 kanderssen@suse.com
- Always provide the layer2 argument when activating a qeth device
(bsc#1183639).
- 4.3.61
* Wed Mar 17 2021 kanderssen@suse.com
- NetworkManager: Added support to write bridge and bonding
configurations (bsc#1181701)
- 4.3.60
* Mon Mar 15 2021 kanderssen@suse.com
- AutoYaST: configure but not apply the network configuration at
the end of the 1st stage (bsc#1180535).
- 4.3.59
* Fri Mar 12 2021 dgonzalez@suse.com
- Add more space before the "Name Servers and Domain Search List"
frame (related to bsc#1183306).
- 4.3.58
* Fri Mar 12 2021 kanderssen@suse.com
- Fix the VLAN interface renaming when suggested by a VLAN ID
change (bsc#1183357)
- 4.3.57
* Thu Mar 11 2021 igonzalezsosa@suse.com
- AutoYaST: allow the interfaces list in the profile to be
empty (bsc#1183257).
- 4.3.56
* Thu Mar 11 2021 mfilka@suse.com
- bnc#1180085
- fixed proposing wpa_supplicant - adapted to use new network-ng
backend.
- dropped some old pieces of code
- 4.3.55
* Fri Mar 05 2021 lslezak@suse.cz
- Define the network configuration buttons for the installer
console (related to jsc#PM-1895, jsc#SLE-16263)
- 4.3.54
* Thu Mar 04 2021 igonzalezsosa@suse.com
- Do not consider proposing 'nfsroot' as startmode when running on
installation (bsc#1182818).
- 4.3.53
* Wed Mar 03 2021 kanderssen@suse.com
- Do not filter ethernet cards when configuring a bond in s390
(bsc#1182911).
- Only propose a 1492 MTU size when configuring an LCS interface.
- 4.3.52
* Tue Mar 02 2021 igonzalezsosa@suse.com
- Support both 'bridge_forwarddelay' and 'bridge_forward_delay'.
The latter takes precedence (bsc#1180944).
- 4.3.51
* Fri Feb 26 2021 igonzalezsosa@suse.com
- Improve wireless devices configuration UX (bsc#1177834):
- Reorganize the widgets, to make the UI easier to understand.
- Add a list of wireless networks which displays additional
information like Mode, Channel, Rate, Signal and
Security method.
- Pre-select the authentication method depending on the
selected network.
- Fix initialization of the "AP ScanMode" field.
- 4.3.50
* Mon Feb 22 2021 kanderssen@suse.com
- Added AutoYaST interfaces section errors reporting (bsc#1174353,
bsc#1178107).
- 4.3.49
* Mon Feb 22 2021 kanderssen@suse.com
- Improve the AutoYaST interfaces reader handling better the IP
Addresses configuration. (bsc#1174353, bsc#1178107)
- 4.3.48
* Fri Feb 19 2021 ancor@suse.com
- Adapted unit test to recent changes in Yast::Report (related to
bsc#1179893).
- 4.3.47
* Wed Feb 10 2021 kanderssen@suse.com
- Allow to disable the proposal of the bridge network configuration
for virtualization in the installation summary or by the new
'virt_bridge_proposal' AutoYaST option (bsc#1178603)
- 4.3.46
* Tue Feb 09 2021 kanderssen@suse.com
- Fix for not present interfaces when deciding whether
the "Scan Network" button should be disabled or not during a
wireless configuration (bsc#1177834).
- 4.3.45
* Thu Feb 04 2021 kanderssen@suse.com
- Cache the hardware netcards information in order to speed up the
access (bsc#1180702)
- 4.3.44
* Mon Feb 01 2021 kanderssen@suse.com
- Added lladdr attribute to the interface section in the networking
schema and honors it when importing the config (bsc#1179876)
- 4.3.43
* Fri Jan 29 2021 kanderssen@suse.com
- Improved the NetworkManager wireless configuration writers adding
support for writing WPA-EAP and open WEP authentication modes.
- 4.3.42
* Tue Jan 26 2021 igonzalezsosa@suse.com
- Fixes some usability issues (bsc#1177834):
- Disable "Edit" and "Delete" buttons when no interfaces
are detected.
- Disable the "Scan Network" button when the interface does not
exist.
* Fri Jan 22 2021 kanderssen@suse.com
- Suggest to modify the VLAN interface name when the VLAN ID is
modified (bsc#1174363)
- 4.3.41
* Fri Jan 22 2021 kanderssen@suse.com
- Cache the online status of s390 group devices speeding up the
population of the devices overview table (bsc#1180702)
- 4.3.40
* Fri Jan 22 2021 kanderssen@suse.com
- Added basic support for writing the network configuration to the
NetworkManager backend (bsc#1180716)
- 4.3.39
* Mon Jan 11 2021 kanderssen@suse.com
- Fix network configuration progress bar steps (bsc#1180702)
- 4.3.38
* Wed Dec 23 2020 kanderssen@suse.com
- Improve additional addresses validation (bsc#1174766)
- 4.3.37
* Mon Dec 21 2020 kanderssen@suse.com
- When the static hostname is modified, propose the hostname to be
used by the affected connection (bsc#1174431)
- 4.3.36
* Wed Dec 16 2020 kanderssen@suse.com
- Fix prefix length assignation when the alias netmask uses
dot notation (bsc#1174766).
- 4.3.35
* Mon Dec 14 2020 kanderssen@suse.com
- Write also connections in case that the hostname mapped to a
connection primary IP address is changed through the DNS
standalone client (bsc#1174431)
- 4.3.34
* Mon Dec 14 2020 kanderssen@suse.com
- Allow to modify the hostname mapped to a connection primary IP
address when the associated hostname is modified (bsc#1174431)
- 4.3.33
* Thu Dec 10 2020 kanderssen@suse.com
- Fix bonding slaves sorting (bsc#1178950)
- 4.3.32
* Wed Dec 09 2020 kanderssen@suse.com
- Clean the ifcfg file cached data before the connection
configuration changes are written (bsc#1178950)
- 4.3.31
* Wed Nov 25 2020 kanderssen@suse.com
- Do not crash when trying to replace an /etc/hosts alias using the
current static hostname and it is not set (bsc#1179178)
- 4.3.30
* Mon Nov 23 2020 kanderssen@suse.com
- Do not show a warn message when modifying a bonding configuration
and all the slaves are already configured with BOOTPROTO='none'
(bsc#1178950)
- 4.3.29
* Fri Nov 20 2020 kanderssen@suse.com
- Fixed detection of connection configuration changes (bsc#1178950)
- 4.3.28
* Fri Nov 20 2020 mfilka@suse.com
- bnc#1175360
- more robust AY profile parser. Do not crash with internal error
on unknown node in interfaces section
- support for static configurations without ip address
- bnc#1175206
- support for defined default when missing bootproto in AY
* Tue Oct 20 2020 jreidinger@suse.com
- fix crash when hostname file missing (bsc#1177904)
- 4.3.27
* Wed Oct 07 2020 kanderssen@suse.com
- Write hostname changes when modified through the 'dns' client
(bsc#1177191).
- 4.3.26
* Mon Oct 05 2020 kanderssen@suse.com
- Modified the way the current hostnames are (static & transient)
read and write (bsc#1173915)
- 4.3.25
* Mon Sep 28 2020 kanderssen@suse.com
- Write the virtualization network configuration properly during an
autoinstallation (bsc#1177025)
- 4.3.24
* Thu Sep 24 2020 kanderssen@suse.com
- Fixed initialization of the bridge STP configuration
(bsc#1176820)
- 4.3.23
* Mon Sep 21 2020 lslezak@suse.cz
- Fixed false error in the y2log (bsc#1176653)
- 4.3.22
* Mon Sep 21 2020 kanderssen@suse.com
- Fix connection hostname initialization (bsc#1175579)
- 4.3.21
* Tue Sep 15 2020 kanderssen@suse.com
- Infer the vlan_id from the interface file name when the attribute
is not declared explicitly (bsc#1176575)
- 4.3.20
* Thu Sep 10 2020 kanderssen@suse.com
- When proposing the virtualization network configuration, force a
read of the current configuration in case that it is not present
(bsc#1176313)
- 4.3.19
* Tue Sep 08 2020 schubi@suse.de
- Using ":" in the autoyast(...) supplements (bsc#1146494).
- 4.3.18
* Wed Aug 26 2020 igonzalezsosa@suse.com
- Unify profile element paths (bsc#1175680).
- 4.3.17
* Tue Aug 11 2020 schubi@suse.de
- AutoYaST: Added supplements: autoyast(host,networking,remote)
into the spec file in order to install this packages if the
section has been defined in the AY configuration file (bsc#1146494).
- 4.3.16
* Wed Jul 29 2020 igonzalezsosa@suse.com
- AutoYaST: do not crash when the <host> section is present
(bsc#1174643).
- 4.3.15
* Tue Jul 28 2020 kanderssen@suse.com
- Do not crash when configuring an IPv6 route through AutoYaST
(bsc#1174353)
- 4.3.14
* Thu Jul 16 2020 kanderssen@suse.com
- Permit to write networking config changes without touching the
service and other components like the firewall (bsc#1173298)
- Permit dot characters in the hostname allowing to specify it as
a FQDN (bsc#1173298)
- 4.3.13
* Wed Jul 15 2020 jreidinger@suse.com
- Do not use Profile.current (bsc#1174173)
- 4.3.12
* Wed Jul 01 2020 kanderssen@suse.com
- Do not remove automatically aliases from /etc/hosts during an
autoinstallation (bsc#1173213)
- Parse correctly udev rules keys using underscores (bsc#1167256)
- 4.3.11
* Fri Jun 26 2020 kanderssen@suse.com
- AutoYaST schema: add the setup_before_proposal element to the
schema (bsc#1171922)
- 4.3.10
* Wed Jun 24 2020 jreidinger@suse.com
- Do not export network when not requested (bsc#1172552)
- 4.3.9
* Fri Jun 19 2020 kanderssen@suse.com
- Do not export any settings when NetworkManager is the network
backend (bsc#1172822).
- 4.3.8
* Fri Jun 19 2020 mvidner@suse.com
- Save inst-sys memory by ending ag_udev_persistent after use
(bsc#1172139).
- 4.3.7
* Mon Jun 15 2020 igonzalezsosa@suse.com
- Do not export interfaces <aliases> section when there are no
aliases to export (bsc#1172922).
- 4.3.6
* Thu Jun 11 2020 kanderssen@suse.com
- Try to install the wireless-tools package when the package is
not installed and the wifi networks are scanned (bsc#1168479)
- 4.3.5
* Wed Jun 10 2020 jlopez@suse.com
- Avoid error when accessing to Bond Slaves in s390 (bsc#1172444).
- 4.3.4
* Mon Jun 08 2020 kanderssen@suse.com
- AutoYaST: Udev rules are written or copied to the target system
properly when defined in the profile (bsc#1169663).
- AutoYaST: Fixed the copy or merge of the linuxrc interfaces
configuration when the installation network configuration is
selected to be kept.
- 4.3.3
* Wed May 20 2020 schubi@suse.de
- AutoYaST: Cleanup/improve issue handling (bsc#1171335).
- 4.3.2
* Wed May 20 2020 kanderssen@suse.com
- AutoYaST: Adapted the module to handle a complete network
configuration during the first stage (bsc#1171922)
- 4.3.1
* Tue May 12 2020 jreidinger@suse.com
- Autoyast schema: Allow optional types for string and map objects
(bsc#1170886)
- 4.3.0
* Thu Apr 16 2020 kanderssen@suse.com
- Do not try to install kernel packages anymore since ISDN support
was already dropped which was the most common use case. Removed
also hardware methods used mainly for ISDN config. (bsc#1151187)
- 4.2.66
* Thu Apr 02 2020 igonzalezsosa@suse.com
- AutoYaST: Do not try to activate network devices that are already
active in S390 systems (bsc#1163149). Related to jsc#SLE-7396.
- AutoYaST: Allow to use spaces or colons to separate channel IDs
in the "chanids" element.
- 4.2.65
* Fri Mar 27 2020 kanderssen@suse.com
- Refresh the current system cached network configuration with the
one written avoiding inconsistencies during installation
(bsc#1162987)
- 4.2.64
* Thu Mar 19 2020 kanderssen@suse.com
- AutoYaST: do not crash when defined dns section whitout hostname
(bsc#1166953)
- AutoYaST: handle the dhcp_hostname option in the dns section
correctly
- 4.2.63
* Wed Mar 18 2020 kanderssen@suse.com
- Do a reload of configured interfaces when writing the
configuration during a ssh or vnc installation (bsc#1166287)
- 4.2.62
* Tue Mar 10 2020 jreidinger@suse.com
- Store ip forwarding set during installation to target system
(bsc#1159295)
- 4.2.61
* Mon Mar 02 2020 mfilka@suse.com
- bsc#1164506
- fixed setting hostname in installer
- bsc#1164587
- fixed setting hostname according to AY profile
- 4.2.60
* Mon Mar 02 2020 kanderssen@suse.com
- Do not modify interface name when enslaving it (bsc#1165463)
- 4.2.59
* Thu Feb 27 2020 kanderssen@suse.com
- Do not crash when running the network configuration client if
the config has not been read by a previous client (bsc#1101514)
- 4.2.58
* Tue Feb 25 2020 schubi@suse.de
- Using SysctlConfig class: Handle sysctl entries in different
directories (bsc#1151649).
- 4.2.57
* Fri Feb 21 2020 kanderssen@suse.com
- Do not crash when checking if a given 'host' is local or not
(bsc#1163305)
- 4.2.56
* Wed Feb 19 2020 igonzalezsosa@suse.com
- Add a class to represent NTP servers (jsc#SLE-7188).
- 4.2.55
* Wed Feb 19 2020 kanderssen@suse.com
- Do not crash with an exception when editing the hardware
configuration of a new unplugged connection (bsc#1162679)
* Fri Feb 07 2020 mfilka@suse.com
- bsc#1162271
- fixed validation of hostname
- 4.2.54
* Fri Feb 07 2020 kanderssen@suse.com
- Fix the installation proposal text reflecting the network
configuration changes (bsc#1162796)
- 4.2.53
* Thu Feb 06 2020 kanderssen@suse.com
- Prevent assignation of values not defined in the AutoYaST profile
when reading the interfaces section (bsc#1162671)
- 4.2.52
* Tue Feb 04 2020 kanderssen@suse.com
- Do not break when reading interface config files with trailing
spaces (bsc#1161300)
- 4.2.51
* Mon Feb 03 2020 kanderssen@suse.com
- Fix connection configuration summary when using a remote
IP address (bsc#1162483)
- 4.2.50
* Fri Jan 31 2020 kanderssen@suse.com
- Do not fail when listing the s390 group devices of a given type
and no one is present (bsc#1160997)
- 4.2.49
* Thu Jan 30 2020 kanderssen@suse.com
- Bring back the s390 group device activation dialog when editing
an offline s390 group device (bsc#1160997)
- 4.2.48
* Thu Jan 23 2020 igonzalezsosa@suse.com
- Do not try to read an ifcfg-* file that does not exist
(bsc#1161234).
* Wed Jan 22 2020 ancor@suse.com
- Do not crash if install.inf contains an IP address that cannot
be resolved to a name (bsc#1161217)
- 4.2.47
* Tue Jan 21 2020 kanderssen@suse.com
- bsc#1156986
- Fix crash when logging that an interface is not connected or
is not bridgeable when proposing the virtualization config.
- 4.2.46
* Wed Jan 15 2020 kanderssen@suse.com
- bsc#1158025
- When touching existent udev rules, modify only the parts that
are relevant or have changed.
- When the hardware is read, use the parent_bus_id as the busid
for virtio netcards.
- 4.2.45
* Wed Jan 15 2020 kanderssen@suse.com
- bsc#1156106
- Fixed the initialization of DNS.dhcp_hostname by the
inst_setup_dhcp client
- 4.2.44
* Mon Jan 06 2020 mvidner@suse.com
- Add a sanity test for CLI error code reporting (bsc#1144351)
- 4.2.43
* Fri Jan 03 2020 mfilka@suse.com
- bnc#1159970
- suppport for reading / writing MTU
- 4.2.42
* Thu Jan 02 2020 mfilka@suse.com
- bnc#1153198, fate#319639
- fixed internal error caused by incompatibility between new and
old DNS / Hostname handling code.
- 4.2.41
* Fri Dec 27 2019 jreidinger@suse.com
- read properly old wireless auth modes and use new ones instead
(bsc#1159160)
- 4.2.40
* Mon Dec 23 2019 mfilka@suse.com
- bnc#1153198, fate#319639
- improved previous fix - exception handling
- 4.2.39
* Tue Dec 17 2019 kanderssen@suse.com
- bsc#1156986
- Fixed the creation of network configuration for virtualization
- 4.2.38
* Tue Dec 17 2019 mfilka@suse.com
- bnc#1153198, fate#319639
improved previous fix together with some cleanup
- 4.2.37
* Mon Dec 16 2019 kanderssen@suse.com
- Centered and added title to the add interface dialog
(jsc#SLE-7753)
- 4.2.36
* Wed Dec 04 2019 mfilka@suse.com
- bnc#1158122
- fixed internal error when incorrectly querying for hostname in
AY's second stage
- 4.2.35
* Tue Nov 26 2019 kanderssen@suse.com
- Drop support for obsolete network device types (jsc#SLE-7753)
- 4.2.34
* Mon Nov 25 2019 kanderssen@suse.com
- Fix wireless mode and auth_mode initialization (bsc#1157394)
- 4.2.33
* Mon Nov 25 2019 kanderssen@suse.com
- Added a special type for the "Unknown" interfaces omitting them
from the interfaces list (bsc#1156285)
- 4.2.32
* Mon Nov 25 2019 kanderssen@suse.com
- Ignores invalid udev rules parts (bsc#1157361)
- 4.2.31
* Thu Nov 21 2019 knut.anderssen@suse.com
- Firsboot dhcp: Ensure the network configuration has been read
before trying to configure it by dhcp (bsc#1157429)
- 4.2.30
* Thu Nov 21 2019 mfilka@suse.com
- bnc#1153198, fate#319639
- implemented proper hostname setup in installation for the new
backend
- 4.2.29
* Tue Nov 19 2019 dgonzalez@suse.com
- Do not crash when wrapping text (bsc#1157161)
- 4.2.28
* Tue Nov 12 2019 jreidinger@suse.com
- fix importing dhclient_set_hostname key from autoyast profile
(bsc#1152021)
- 4.2.27
* Sun Nov 10 2019 kanderssen@suse.com
- Wireless: Fix wpa auth modes selection removing the prefix from
the combobox value which is not used when writing the config.
(bsc#1155639)
- 4.2.26
* Fri Nov 08 2019 kanderssen@suse.com
- Live installation:
- Do not try to configure dhcp when NetworkManager is in use.
- Show the general tab in the lan client allowing to switch
between backends when systemd is running.
- Do not do a netconfig update during an installation for not
breaking the current resolv configuration.
- 4.2.25
* Fri Nov 01 2019 jreidinger@suse.com
- fix typo in remote desktop file (thanks for contribution
to Markus S aka kamikazow) (bsc#1155584)
- 4.2.24
* Tue Oct 15 2019 jreidinger@suse.com
- Fix crash caused by type in widget method (caused in 4.2.22 by
rubocop done as side-effect of bsc#1153673 fix)
- 4.2.23
* Mon Oct 14 2019 kanderssen@suse.com
- bsc#1153673
- Fix Yast::Logger dependency in bridge connection config.
- 4.2.22
* Wed Oct 09 2019 jreidinger@suse.com
- Update reference in VLAN, Bridge or Bond when its device is
removed or renamed (bsc#1153460)
- 4.2.21
* Mon Oct 07 2019 igonzalezsosa@suse.com
- Place sysctl settings in /etc/sysctl.d/ (jsc#SLE-9077).
- 4.2.20
* Mon Oct 07 2019 kanderssen@suse.com
- AutoYaST: Added back the activation of s390 devices during the
first stage as it was removed when switched to the new data model
* Fri Oct 04 2019 jreidinger@suse.com
- Fix CLI tests for network (bsc#957537)
- 4.2.19
* Thu Oct 03 2019 jreidinger@suse.com
- Fix blink positioning in UI (bsc#1119407)
- 4.2.18
* Wed Oct 02 2019 kanderssen@suse.com
- bsc#1152840
- Fix interface ipaddr and prefixlen in the cloned profile.
- 4.2.17
* Wed Oct 02 2019 jreidinger@suse.com
- Adapt network CLI to new data model with improved error reporting
(bsc#1151242)
- 4.2.16
* Wed Oct 02 2019 igonzalezsosa@suse.com
- boo#1152748:
- Fix detection of the network status during installation.
- 4.1.15
* Tue Oct 01 2019 kanderssen@suse.com
- AY: Fix interface name check for using the fallback when not set.
* Tue Oct 01 2019 igonzalezsosa@suse.com
- boo#1152627
- Fix circular dependency between DNS and Host modules
- Remove unneeded code related to the already dropped feature to write the hostname
to /etc/hosts.
- 4.2.14
* Fri Sep 20 2019 igonzalezsosa@suse.com
- bsc#1151491
- Completed the new data model (support for TUN/TAP, bridges,
bonding, VLANs, etc.).
- Switched to use the new data model.
- New wireless configuration workflow.
- Revamped support for interfaces renaming and drivers assignment, including
better udev rules handling.
- Fixed /etc/hosts handling when switching from static to DHCP based configuration.
- Many small fixes in different areas.
- 4.2.13
* Tue Sep 10 2019 mfilka@suse.com
- bnc#1149234
- apply udev rule from AY profile according to device's mac
value when permanent_mac is missing in list of the device's
options
- bsc#1133442
- Increased the DHCP timeout when NetworkManager is in use to
its default (45 seconds).
- 4.2.12
* Tue Jul 30 2019 dimstar@opensuse.org
- Requires hostname: there are many places where the module calls
/bin/hostname (boo#1142595).
- 4.2.11
* Fri Jul 19 2019 jreidinger@suse.com
- avoid dependency on autoyast2-installation
- 4.2.10
* Wed Jul 17 2019 igonzalezsosa@suse.com
- Revamp UI internals, adding new widgets, sequences and
introducing the concept of interface builder.
- Add initial bits of the new data model.
- Fix several bugs that were introduced in version 4.2.2.
- 4.2.9
* Wed Jul 03 2019 igonzalezsosa@suse.com
- The 'lan' client returns the correct value (bsc#1140199).
- 4.2.8
* Wed Jul 03 2019 kanderssen@suse.com
- bsc#1137346
- CLI: Report an error instead of raising an exception when the
device type is not provided and there is no way to infer it
from the given options.
* Fri Jun 14 2019 kanderssen@suse.com
- boo#1138297
- Improve some mocking in NetworkService.activate_network_service
unit test which caused some test to fail randomly.
- 4.2.7
* Fri Jun 14 2019 kanderssen@suse.com
- boo#1138278
- Adapt the AddressDialog to use the new Y2Network::Routing class
when checking if there is some default gateway defined.
- 4.2.6
* Wed Jun 12 2019 kanderssen@suse.com
- bsc#1136929
- Use the hwinfo permanent mac address instead of the current mac
which could be wrong in case of an enslaved interface.
- bsc#1137324
- Do not create duplicate udev rule attributes when editing an
interface name.
- boo#903889
- When proposing a bridge configuration for virtualization, move
the routes from the enslaved interface to the new bridge.
- 4.2.5
* Fri Jun 07 2019 hellcp@mailbox.org
- Use new schema of desktop files (boo#1084864)
- Clean up spec
- Rename desktop files
- 4.2.4
* Mon May 20 2019 mfilka@suse.com
- bnc#1131588
- display a confirmation popup when static route is going to be
removed when switching a device to dhcp
- 4.2.3
* Wed Apr 24 2019 knut.anderssen@suse.com
- Started with yast2-network refactorization:
- Added the y2network namespace.
- Dropped not used routing_auto client.
- Reimplemented completely routing configuration droping the old
Yast::Routing module.
- The Y2Network::Routing configuration permits to have multiple
default routes and does not drop extra options for them. That
is, different routing tables can be used. (fate#326796)
- 4.2.2
* Mon Apr 22 2019 igonzalezsosa@suse.com
- Fix mode/second_stage value initialization (bsc#1132057)
- 4.2.1
* Fri Apr 05 2019 jreidinger@suse.com
- publish find dhcp interfaces to component system, so yapi can be
dropped from yast2-samba-client (fate#323734)
- 4.2.0
* Thu Apr 04 2019 knut.anderssen@suse.com
- bnc#1129012
- AY: Use the bus_id of the udev parent device when using virtio
netcards and matching the existent rules with the defined in
in the profile.
- 4.1.45
* Thu Apr 04 2019 schubi@suse.de
- Showing correct start mode for nfsroot device (bsc#1105692).
* Thu Mar 21 2019 knut.anderssen@suse.com
- bnc#1094934
- Fixed internal error when writing remote configuration by
cmdline (yast remote allow set=yes).
- 4.1.44
* Wed Mar 06 2019 lslezak@suse.cz
- Fixed "can't modify frozen String" crashes (related to
bsc#1125006 and gh#yast/yast-ruby-bindings#228)
- 4.1.43
* Wed Feb 27 2019 knut.anderssen@suse.com
- Installation proposal (bsc#1127228, bsc#1124478, bsc#1124498):
- Fixed issue refreshing the list of packages needed for the
default backend the first time the proposal is called.
- Do not cache the default network backend but only the current
one when modified by the user in the proposal
- Fallback to :wicked when saving the network if NetworkManager
is selected as the service to be used but not installed.
- 4.1.42
* Thu Feb 21 2019 knut.anderssen@suse.com
- When renaming an interface (bsc#1060207):
- Offer to the user the option to update device routes that
belongs to the previous interface name.
- Update the Routing devices list with the new one when needed.
- Do not drop configured elements from the list when canceling
an edition (bsc#998540)
- 4.1.41
* Tue Feb 19 2019 knut.anderssen@suse.com
- Installation proposal (bsc#1124478, bsc#1124498):
- Do not offer NetworkManager when the package is not available
- Respect the network backend selected in the proposal at the end
of the installation
- Removed the hostname write (127.0.0.2) from the summary
- 4.1.40
* Tue Feb 12 2019 schubi@suse.de
- AutoYaST in running system: Do not reset /etc/hosts (bsc#1122658)
- 4.1.39
* Thu Feb 07 2019 knut.anderssen@suse.com
- fate#324662
- Drop SuSEFirewall2 code completely.
- Permits to choose not only default firewalld zones but also
custom ones.
- Allow the user to select the "DEFAULT" zone or disable the
interface zone mapping through ifcfg files per interface.
- 4.1.38
* Wed Feb 06 2019 knut.anderssen@suse.com
- bsc#1124002
- do not crash when cloning and trying to read a device protocol
or portname.
- 4.1.37
* Tue Jan 29 2019 mfilka@suse.com
- bnc#1123102
- do not crash with internal error when no hostname is set when
submitting device with static configuration
- 4.1.36
* Fri Jan 25 2019 knut.anderssen@suse.com
- bsc#112952
- Try to install the wireless-tools package when the package is
not installed and the wifi networks are scanned.
- 4.1.35
* Wed Jan 23 2019 mfilka@suse.com
- bnc#1122387
- do not crash with internal error when modifying /etc/hosts
- 4.1.34
* Tue Jan 22 2019 mfilka@suse.com
- bnc#1122517
- do not crash with internal error when cloning /etc/hosts
- 4.1.33
* Fri Jan 18 2019 mfilka@suse.com
- bnc#1122307
- do not crash with internal error when adding new device
- 4.1.32
* Fri Jan 18 2019 schubi@suse.de
- AutoYaST write settings: Fixed crash while reading MAC address
(bsc#1121087).
- 4.1.31
* Wed Jan 16 2019 mfilka@suse.com
- bnc#1121421
- do not crash with internal error when installing using
AutoYaST profile with networking section
- 4.1.30
* Thu Jan 10 2019 mfilka@suse.com
- bnc#1111483
- write physical device into vlan's configuration
- 4.1.29
* Fri Jan 04 2019 schubi@suse.de
- Added needed method GetDHCPHostnameIP again (bsc#1119690).
- 4.1.28
* Fri Jan 04 2019 mfilka@suse.com
- bnc#1116568
- /etc/hosts load performance improvements
- 4.1.27
* Wed Jan 02 2019 schubi@suse.de
- Showing correct start mode for nfsroot device (bsc#1105692).
- 4.1.26
* Tue Dec 18 2018 mfilka@suse.com
- bnc#1119723
- properly copy ifcfg files from instsys to target
- 4.1.25
* Mon Dec 10 2018 jreidinger@suse.com
- always use absolute path to binaries (bsc#1118291)
- properly escape shell arguments (bsc#1118291)
- 4.1.24
* Mon Dec 10 2018 shundhammer@suse.com
- Security audit fixes: Removed unused function stdout_of()
(part of bsc#1118291)
- 4.1.23
* Thu Dec 06 2018 shundhammer@suse.com
- Security audit fixes: Use absolute paths when calling external
commands and shell-escape arguments (bsc#1118291)
- 4.1.22
* Tue Dec 04 2018 mfilka@suse.com
- bnc#1114213
- improved help for dns nameserver address to mention also valid
format of IPv6
- 4.1.21
* Thu Nov 29 2018 noahadvs@gmail.com
- Provide icon with module (boo#1109310)
- 4.1.20
* Mon Nov 26 2018 mfilka@suse.com
- bnc#934055, bnc#972463
- cleanup in Hostname / DNS tab - removed obsolete or unsupported
options.
- 4.1.19
* Mon Nov 26 2018 mfilka@suse.com
- bnc#709176
- keep original hostnames untouched in /etc/hosts when only IP
changed
- 4.1.18
* Thu Nov 22 2018 mfilka@suse.com
- bnc#1107470
- this bug is fixed since 4.0.14 (3.2.47)
* Sun Nov 11 2018 knut.anderssen@suse.com
- Yast::Lan: Added method for obtaining the NTP servers offered by
DHCP (fate#323454)
- 4.1.17
* Fri Nov 09 2018 dgonzalez@suse.com
- Allow to swich the network backend from the proposal (related to
fate#326480)
- 4.1.16
* Wed Oct 31 2018 mfilka@suse.com
- bnc#1111925
- always propose wpa_supplicant when configuring wlan
- bsc#1113080
- Fix detection of peap mode (jreidinger@suse.com)
- Propose most commonly used setup for WPA by default
- 4.1.15
* Wed Oct 24 2018 jreidinger@suse.com
- Fix detection of peap mode (bsc#1113080)
- 4.1.14
* Tue Oct 16 2018 knut.anderssen@suse.com
- Simplified the installation network proposal collecting all the
configured dhcp interfaces in a single entry (fate#326480)
- 4.1.13
* Tue Oct 16 2018 mfilka@suse.com
- bsc#1110598
- fixed path to license file
- 4.1.12
* Mon Oct 15 2018 mfilka@suse.com
- fate#323454
- wicked compatible parsing of NTP servers from dhcp leases
- 4.1.11
* Thu Oct 04 2018 knut.anderssen@suse.com
- Fixes to the networking AY schema (bsc#1108852)
- Added missed s390 device 'layer2' boolean element.
- 4.1.10
* Wed Oct 03 2018 mfilka@suse.com
- bnc#1105230
- do not crash with internal error when 0.0.0.0 netmask is used
in the routing tab
- Activate s390 network devices before applying udev naming rules,
avoiding "Invalid key/value pair in
/etc/udev/rules.d/70-persistent-net.rules" (bsc#1095761)
(by mvidner@suse.com)
- 4.1.9
* Tue Oct 02 2018 mfilka@suse.com
- bnc#1109312
- fixed internal error (replaced calls to LanItems::FreeDevices
which was removed)
- 4.1.8
* Tue Sep 18 2018 mfilka@suse.com
- bnc#964856
- adapted to changes in NetworkInterfaces API
- GetFreeDevice and GetFreeDevices was dropped
- 4.1.7
* Wed Aug 22 2018 dgonzalez@suse.com
- Update calls to YaST2 systemd classes (related to fate#319428)
- 4.1.6
* Tue Aug 21 2018 schubi@suse.de
- Changed dir of COPYING file.
* Fri Aug 03 2018 knut.anderssen@suse.com
- Fixes to the networking AY schema (bsc#1103712)
- Permitted the use of 'listentry' element in list entries.
- 4.1.5
* Thu Jul 12 2018 mfilka@suse.com
- bnc#964856
- dropped calls to obsolete NetworkInterfaces API
- CLI: setting device type explicitly using new type option is
mandatory when adding new device
- 4.1.4
* Mon Jul 02 2018 schubi@suse.de
- lan_test: stubbin Host.GetModified call (bnc#1052042).
- 4.1.3
* Mon Jul 02 2018 schubi@suse.de
- Fixed flickering testcase which has been introduced by fixing
bnc#1052042.
- 4.1.2
* Thu Jun 28 2018 schubi@suse.de
- Added additional searchkeys to desktop file (fate#321043).
* Tue Jun 26 2018 mfilka@suse.com
- removed NetworkStorage as it is unused (had been replaced by
storage-ng)
* Fri Jun 22 2018 schubi@suse.de
- Removed AutoYaST dependencies in order to run the host module
without AutoYaST packages (bnc#1098407).
- 4.1.1
* Wed Jun 20 2018 mfilka@suse.com
- dropped dead code
- 4.1.0
* Wed Jun 20 2018 mfilka@suse.com
- bnc#1086454
- do not enforce particular mode for IPoIB devices by default
- 4.0.35
* Mon Jun 18 2018 mfilka@suse.com
- bnc#1097954
- fixed several rpmlint warnings
- 4.0.34
* Tue Jun 12 2018 schubi@suse.de
- AutoYaST: Checking for empty host name entries and informing
the user. (bnc#1095113)
4.0.33
* Thu Jun 07 2018 knut.anderssen@suse.com
- AutoYaST: Do not crash when trying to convert the /etc/hosts
profile declaration from multiple line host entries for the same
host to just one line (bnc#1095971)
- 4.0.32
* Wed May 09 2018 knut.anderssen@suse.com
- Fix the check for adjusting ifcfg configuration in case of
network based root filesystem when saving the network at the end
of the installation (bsc#1090752).
- 4.0.31
* Wed Apr 25 2018 knut.anderssen@suse.com
- Y2remote: When vnc is disabled disable also all the services that
are still enabled (bsc#1088646)
- 4.0.30
* Wed Apr 25 2018 mfilka@suse.com
- bnc#1077435
- do not crash with internal error when /etc/hosts is corrupted
- 4.0.29
* Mon Apr 23 2018 mfilka@suse.com
- bnc#1089471
- previous fix contains wrong check of ifcfg options and proposes
wpa_supplicant incorrectly. The check was fixed and
wpa_supplicant is proposed when needed only.
- 4.0.28
* Sat Apr 21 2018 mfilka@suse.com
- bnc#1089471
- do not propose vlan, iw and tunctl packages for installation as
its functionality is implemented by wicked.
- 4.0.27
* Thu Apr 19 2018 knut.anderssen@suse.com
- Y2Remote:
- Fixed the start of services when writing (bsc#1088646)
- Fixed the modification of vnc services configuration according
to the selection of allowed interfaces (bsc#1088647)
- 4.0.26
* Fri Apr 06 2018 knut.anderssen@suse.com
- Fixed preformatted proposal for network module (bsc#1088488)
- 4.0.25
* Tue Mar 27 2018 lslezak@suse.cz
- Added missing "textdomain" call to properly translate the
web access check box label (bsc#1081466)
- 4.0.24
* Wed Mar 21 2018 knut.anderssen@suse.com
- Added networking interfaces 'zone' element to the AutoYaST schema
file (bsc#1013047)
- 4.0.23
* Fri Mar 16 2018 knut.anderssen@suse.com
- Read and write the firewalld configuration when the remote access
is configured through the remote client dialog (bsc#1085658)
- 4.0.22
* Thu Mar 08 2018 knut.anderssen@suse.com
- bsc#1078991
- Do not crash when some LanItem does not have hardware info.
- 4.0.21
* Tue Mar 06 2018 knut.anderssen@suse.com
- Tigervnc will provide the definition of firewalld services so
we will use them instead of the vnc-server service definition
that is shipped with firewalld (bsc#1081952)
- 4.0.20
* Thu Mar 01 2018 knut.anderssen@suse.com
- save_network client copies wicked dhcp files from inst-sys into
the target using the same dhcp id when rebooting after
installation. (bsc#1082832)
- 4.0.19
* Thu Mar 01 2018 lslezak@suse.cz
- Fixed a random build failure (introduced by the previous fix for
bsc#1083015)
- 4.0.18
* Tue Feb 27 2018 jreidinger@suse.com
- add missing textdomains (bsc#1083015)
- 4.0.17
* Fri Feb 23 2018 knut.anderssen@suse.com
- Really translate firewalld zones (bsc#1082246)
- 4.0.16
* Wed Feb 14 2018 knut.anderssen@suse.com
- Virtualization Bridge Proposal: Do not propose network interfaces
without link as bridgeable (bsc#1062596, bsc#1072951).
- 4.0.15
* Wed Jan 24 2018 mfilka@suse.com
- bnc#1056109
- improved device name collision recognition when applying device
renaming according to the AY profile
- 4.0.14
* Mon Dec 11 2017 knut.anderssen@suse.com
- Remote: reimplemented the module dialogs and clients under
y2remote libdir.
- Fixed restart of xvnc as it is now a socket instead of a service
(bsc#1070582).
- 4.0.13
* Mon Dec 04 2017 mfilka@suse.com
- bnc#1061306
- use API for accessing device's sysconfig to avoid internal
errors
- 4.0.12
* Wed Nov 29 2017 knut.anderssen@suse.com
- Switched VNC service from xinetd to systemd.
- VNC over HTTP service can be enabled/disabled separately.
(fate#323880, bnc#1058460)
- 4.0.11
* Fri Nov 24 2017 knut.anderssen@suse.com
- Do not depend on SuSEFirewall for zone interface change. The zone
is now written in the ifcfg-file and wicked takes care of calling
firewalld commandline. (fate#323460)
- 4.0.10
* Wed Nov 22 2017 knut.anderssen@suse.com
- AutoYaST: Do not display a warning about second stage being
disabled when importing the DNS configuration (added in 3.3.1)
once the network configuration is done during the first stage
(since version 3.3.3) (bsc#1069761)
- 4.0.9
* Wed Nov 15 2017 knut.anderssen@suse.com
- bnc#1066982
- Removed an unnecesary SuSEFirewall.Write call when storing the
Firewall remote client configuration.
- 4.0.8
* Tue Nov 14 2017 jreidinger@suse.com
- bnc#1066982
- fixed initialization and storing of firewall widget
- 4.0.7
* Fri Nov 03 2017 knut.anderssen@suse.com
- Fixed a method name typo and removed SuSEFirewall from Routing
module (bsc#572202)
- 4.0.6
* Wed Nov 01 2017 mfilka@suse.com
- bnc#1052042
- properly update canonical name and aliases in /etc/hosts when
FQDN is provided as a hostname
- 4.0.5
* Wed Oct 25 2017 knut.anderssen@suse.com
- Do not depend on SuSEfirewall2 anymore for writing IPv4
forwarding as Firewalld will be the default FW in SLE15.
(fate#323460, bsc#572202)
- 4.0.4
* Thu Oct 05 2017 schubi@suse.de
- Remote settings: Only reading firewall settings if we are really
in an installed system. (bnc#1055279, bnc#1058071)
- 4.0.3
* Wed Oct 04 2017 knut.anderssen@suse.com
- AutoYaST: Do not display a warning about disabled second stage
when if network is configured before the proposal (bsc#1054400)
- 4.0.2
* Fri Sep 29 2017 knut.anderssen@suse.com
- Do not blank out /etc/hosts when no <host> section is defined
(bsc#1058396)
- 4.0.1
* Tue Sep 26 2017 knut.anderssen@suse.com
- Preload the global DHCLIENT_SET_HOSTNAME option based on linuxrc
sethostname option if given or based in control file default if
not. (bsc#1054933)
- Do not override the configuration with the default defined in
the control file at the end of the first stage (bsc#1056633)
- 4.0.0
* Wed Aug 30 2017 knut.anderssen@suse.com
- Moved wrap_text method to yast2 UI::TextHelpers (bsc#1055643)
- 3.3.12
* Mon Aug 21 2017 lslezak@suse.cz
- AutoYaST: Do not display a warning about disabled second stage
when the hostname setting is read out of profile (bsc#1054400)
- 3.3.11
* Mon Aug 21 2017 mfilka@suse.com
- bnc#1039656
- do not clear /etc/hosts when installing virtual Host
* Thu Aug 17 2017 mfilka@suse.com
- restored part of version 3.3.3 (bnc#1049814) which was
accidentaly dropped in subsequent versions
- 3.3.10
* Thu Aug 17 2017 snwint@suse.de
- use storage-ng code to determine if "/" is on a network filesystem
- 3.3.9
* Mon Aug 14 2017 snwint@suse.com
- merge storage-ng branch to master (fate#318196)
- note: all changes below with this date belong to the merge
- 3.3.8
* Mon Aug 14 2017 ancor@suse.com
- storage-ng: adapted calls to temporary y2storage_* methods, since
they were finally removed from Y2Storage::StorageManager.
* Mon Aug 14 2017 gsouza@suse.com
- Added support to storage-ng so it can verify if a disk is in
network.
- Updated dependencies to include storage-ng.
* Mon Aug 14 2017 shundhammer@suse.de
- Merged master to storage-ng branch
* Mon Aug 14 2017 ancor@suse.com
- Version temporarily bumped to 3.3.x to prioritize the
storage-ng branch
* Mon Aug 14 2017 ancor@suse.com
- storage-ng: commented remaining code relying on the old
yast2-storage
- Removed yast2-storage dependency
* Mon Aug 14 2017 ancor@suse.com
- storage-ng: commented installation-related code relying on the
old yast2-storage
- Version temporarily bumped to 3.2.x to prioritize this branch
* Mon Aug 14 2017 mfilka@suse.com
- bnc#1047615
- check if /etc/hosts exists before loading its content
- 3.3.7
* Tue Aug 08 2017 igonzalezsosa@suse.com
- bnc#1037727
- fixed device name recognition during AY installation
- 3.3.6
* Wed Aug 02 2017 knut.anderssen@suse.com
- bsc#1051624
- Fix default values for not existent sysconfig network variables
when read.
- 3.3.5
* Fri Jul 28 2017 igonzalezsosa@suse.com
- bnc#1050986
- fix udev rules export when more than one device is configured
- bnc#1037727
- dhclient configuration warning message does not block AutoYaST
- 3.3.4
* Thu Jul 27 2017 knut.anderssen@suse.com
- bsc#1039851
- Host: Load /etc/hosts entries before import the ones defined in
a given AutoYaST profile making it backward compatible.
* Wed Jul 12 2017 mfilka@suse.com
- bnc#1038717
- avoid creating duplicate udev rules in AutoYaST installation
* Tue Jul 11 2017 mfilka@suse.com
- bnc#1049814
- Moving network setup in AY into first stage completely when
the second stage is disabled.
- 3.3.3
* Mon Jul 10 2017 jreidinger@suse.com
- Fix crash during write if Host.Read and Host.Import is called
together (bsc#1047929)
- 3.3.2
* Tue Jul 04 2017 lslezak@suse.cz
- Display a warning in AutoYaST installation when importing the DNS
configuration with disabled seconds stage (the second stage is
currently required for writing the config) (bsc#1046198)
- 3.3.1
* Tue Jul 04 2017 mfilka@suse.com
- bnc#1046735
- do not update sysconfig when no IP is given in case of static
NIC configuration.
* Tue Jul 04 2017 mfilka@suse.com
- bsc#1044982
- handle bad pci class/subclass ids used by Mellanox ConnectX-3
- nmoreychaisemartin@suse.com
- 3.3.0
* Tue Jul 04 2017 mfilka@suse.com
- bnc#1046677
- disable widgets which cannot be configured by the selected
network service
- 3.2.29
* Thu May 25 2017 mfilka@suse.com
- bnc#1039532
- do not write hostname into /etc/hosts duplicitly for one IP
- configure static IPs without own hostname to resolve to system
wide hostname during installation
- 3.2.28
* Mon May 22 2017 gsouza@suse.com
- bsc#1036440 and bsc#994471
- Command "yast remote list" should not alter the system.
- 3.2.27
* Wed May 17 2017 mfilka@suse.com
- bnc#1038521
- do not raise an internal error during installation when
multiple static device and hostname configurations were
provided
- 3.2.26
* Tue May 16 2017 knut.anderssen@suse.com
- bsc#1035908
- Moved inst_install_inf client to yast2-installation.
- 3.2.25
* Mon Apr 03 2017 knut.anderssen@suse.com
- bsc#956755
- Don't propose wlan interfaces for the virtualization bridge.
- 3.2.24
* Mon Apr 03 2017 mfilka@suse.com
- bnc#927629
- improved adding routes. Accepts netmask or prefix length.
- fixed column name in add route dialog from Genmask to more
common Netmask
- 3.2.23
* Wed Mar 29 2017 knut.anderssen@suse.com
- Fix typo in edit_nic_name dialog using bus_id instead of busid
(bsc#1031120)
- 3.2.22
* Tue Mar 21 2017 jreidinger@suse.com
- adapt to new version of cfa (new cfa needed for bsc#1023204)
- 3.2.21
* Wed Feb 22 2017 mfilka@suse.com
- bnc#1020074
- when incomplete udev rule is read from the AY profile, it is
ignored instead of raising an internal error.
- 3.2.20
* Thu Jan 19 2017 kanderssen@suse.com
- Added network proposal using the new summary api and the new
proposal_client flag 'label_proposal' for CASP special formmating
(fate#322328).
- 3.2.19
* Wed Jan 18 2017 kanderssen@suse.com
- Added summaries for the configured interfaces, particulary an one
line summary. (fate#322328)
* Wed Jan 11 2017 kanderssen@suse.com
- Fixed the assignment of udev rules to Lan Items when a previous
one does not exist (bsc#996879).
- 3.2.18
* Fri Dec 09 2016 mfilka@suse.com
- bnc#1013605
- Enable DHCP_HOSTNAME listbox only when wicked service is used.
- Fixed displaying the "keep current settings" option.
- 3.2.17
* Wed Dec 07 2016 mfilka@suse.com
- bnc#1013684
- do not crash with internal error when setting static setup for
newly added device
- 3.2.16
* Wed Nov 30 2016 kanderssen@suse.com
- Linuxrc does not export some variables anymore and handles the
configuration of network directly, for that reason, some methods
or reponsibilities of InstallInfConvertor class are not needed
being removed.
* Wed Nov 30 2016 mfilka@suse.com
- bnc#1012764
- made rpm architecture independent (noarch)
- 3.2.15
* Tue Nov 29 2016 mfilka@suse.com
- bnc#1012581
- do not crash with internal error stating undefined method when
switching to "Hostname / DNS" tab when the system contains
incorrect configuration of DHCLIENT_SET_HOSTNAME
- 3.2.14
* Mon Nov 28 2016 mfilka@suse.com
- bnc#1009931
- update item's overview with freshly edited values
- 3.2.13
* Wed Nov 23 2016 mfilka@suse.com
- bsc#984890
- new implementation of setting hostname via DHCP. User is
allowed to set hostname via particular interface or set a
reasonable default value for all interfaces.
- bsc#1007172 (kanderssen@suse.com)
- When an interface is enslaved in a bond the udev rule is modified
using the bus_id instead of the mac address but some multiport
cards could use the same bus_id. In such cases also the dev_port
is needed. Taking this in account the dev_port will be added
always when a udev rule based on bus_id is written.
- 3.2.12
* Tue Nov 22 2016 igonzalezsosa@suse.com
- Do not crash when removing an entry from the /etc/hosts file
(bsc#1010994)
- 3.2.11
* Tue Nov 22 2016 jreidinger@suse.com
- do not crash when on command line is passed non-number id
(bsc#1003908)
- 3.2.10
* Thu Oct 27 2016 jreidinger@suse.com
- Make network summary consistent with other summaries
(bsc#745940)
- 3.2.9
* Tue Oct 25 2016 mvidner@suse.com
- Fixed a hardcoded interface name in a CLI test (bsc#1006799)
- 3.2.8
* Mon Oct 17 2016 kanderssen@suse.com
- Bridge handling has been improved (bsc#962824).
- "NONE" is shown instead of 0.0.0.0 for old bridge configuration
- The bridge master is shown in the enslaved interface.
- The interfaces overview is updated after a bridge is modified
- The interfaces enlsaved are not lost when save in a different
tab.
- 3.2.7
* Mon Oct 17 2016 jreidinger@suse.com
- fix crash when dummy ip is not needed
(found during testing of bsc#877047)
- 3.2.6
* Fri Oct 14 2016 jreidinger@suse.com
- optimize loading /etc/hosts if there is a lot of entries
(bsc#877047)
- 3.2.5
* Mon Oct 10 2016 mfilka@suse.com
- do not duplicate work of network service at the beginning of
AutoYaST's second stage - not loading modules and so on.
- 3.2.4
* Fri Oct 07 2016 kanderssen@suse.com
- If an interface is not configured yet then just set the interface
link, the backend should handle at least the up event.
(bsc#991694)
- 3.2.3
* Fri Oct 07 2016 ancor@suse.com
- Extra space in the remote administration dialog (bsc#988904)
* Thu Oct 06 2016 mfilka@suse.com
- Use full interface up / down instead of setting just link
up / down to allow proper update of interface's configuration.
(bsc#991694)
- 3.2.2
* Wed Oct 05 2016 ancor@suse.com
- If WIFI is configured during installation, make sure the packages
required for WIFI to work are installed in the resulting system
(bsc#1002700)
- 3.2.1
* Wed Sep 21 2016 jreidinger@suse.com
- reduce rpm build time (bsc#999203)
- 3.2.0
* Wed Sep 07 2016 mfilka@suse.com
- bnc#993587
- extended fix from 3.1.168 to cover also virtual interfaces
- 3.1.170
* Sat Sep 03 2016 mfilka@suse.com
- bnc#988157
- disable DHCP autoconfiguration in installer when an interface
configuration is provided via linuxrc
- 3.1.169
* Wed Aug 24 2016 mfilka@suse.com
- bnc#993587
- installer is able to newly configured set devices up in case of
ssh/vnc installation
- 3.1.168
* Fri Aug 19 2016 mfilka@suse.com
- bnc#991382
- init and store IFPLUGD_PRIORITY properly
- 3.1.167
* Thu Aug 18 2016 mfilka@suse.com
- bnc#991486
- extended fix for this bug from 3.1.163. Do not report invalid
names incorrectly
- 3.1.166
* Thu Aug 11 2016 mfilka@suse.com
- bnc#985905
- do not limit number of bonding slaves to 10
- 3.1.165
* Thu Aug 11 2016 mfilka@suse.com
- bnc#988786
- Create bridge when proposing configuration for VM host.
- 3.1.164
* Wed Aug 10 2016 ancor@suse.com
- Improved parsing of vlan ids that are longer than one character.
* Wed Aug 10 2016 mfilka@suse.com
- bnc#991486
- Do not allow creating device with oversized configuration name.
- 3.1.163
* Tue Aug 09 2016 schubi@suse.de
- Added entry "s390-devices" to the AutoYaST schema file.
Bug similar bnc#954412.
- 3.1.162
* Tue Aug 09 2016 mfilka@suse.com
- bnc#991920
- do not crash with internal error when renaming unconfigured
device
- 3.1.161
* Tue Aug 02 2016 mfilka@suse.com
- bnc#991382
- Do not crash with internal error when using "On Cable
Connection" device activation mode.
- 3.1.160
* Tue Jul 12 2016 schubi@suse.de
- Added entry "dhclient_set_hostname" to the AutoYaST schema file.
Bug similar bnc#954412.
- 3.1.159
* Thu Jun 23 2016 mfilka@suse.com
- bnc#970320, bnc#865132, bnc#852604
- do not overwrite Postfix MTA configuration when saving network
setup
- 3.1.158
* Tue Jun 21 2016 igonzalezsosa@suse.com
- bsc#984146
- set AutoYaST keep_install_network parameter to 'true' by
default
- restore the default behavior present in SLE 12 SP1 and
openSUSE Leap 42.1
- 3.1.157
* Tue Jun 14 2016 mfilka@suse.com
- bnc#983201
- do not crash with internal error when configuring new device on
s390
- 3.1.156
* Mon Jun 13 2016 mfilka@suse.com
- fate#318787
- detect modifications when closing module, do not restart when
not needed.
- 3.1.155
* Wed Jun 01 2016 igonzalezsosa@suse.com
- Drop yast2-network-devel-doc package (fate#320356)
- 3.1.154
* Tue May 31 2016 mfilka@suse.com
- bnc#981842
- enable / disable vncmanager only when installed to avoid
failures in systemd calls
- 3.1.153
* Thu May 19 2016 mfilka@suse.com
- fate#319319
- implemented support for vncmanager in Remote module. Thanks to
msrb@suse.cz.
- 3.1.152
* Tue May 17 2016 mfilka@suse.com
- bnc#971175
- /etc/hosts is correctly updated with static address, hostname
when static net configuration is done via linuxrc and hostname
is provided by AY profile
- 3.1.151
* Fri May 13 2016 knut.anderssen@suse.com
- fate#315995
- Added physical port id to device overview and bond slaves item
description if supported.
- Warn the user when two or more bonded interfaces share the
same physical port.
- Available interfaces for bonding in bond slaves tab are now
sorted and moving them up or down maintain the interface
selected.
- 3.1.150
* Mon May 02 2016 mfilka@suse.com
- bnc#977953
- added dependency on yast2-proxy. "yast2 lan" won't fail with
internal error (missing Proxy module), when yast2-network is
installed into a minimal server installation.
- 3.1.149
* Tue Apr 19 2016 mfilka@suse.com
- bnc#966694
- TigerVNC Viewer Error: No matching security types. Do not touch
VNC arguments when enabling or disabling it. Thanks to
msrb@suse.com for the patch.
- 3.1.148
* Tue Apr 12 2016 mfilka@suse.com
- bnc#974910
- fixed internal error when no "interfaces" group is found in an
AY profile
- 3.1.147
* Mon Apr 11 2016 mfilka@suse.com
- bnc#955217, bnc#956605
- fixed internal error caused by the previous patch
- 3.1.146
* Mon Apr 04 2016 mfilka@suse.com
- bnc#955217, bnc#956605
- unified udev rule handling by always doing it in the 1st stage
of installation.
- 3.1.145
* Sun Mar 06 2016 mfilka@suse.com
- bnc#920089
- fix by Damir Porobic
- fixed layout of dialog for new route definition
- 3.1.144
* Mon Feb 22 2016 mfilka@suse.com
- bnc#960703
- sometimes wicked was started instead of NetworkManager in case
of AY installation. Moreover it could happen that both services
were "half-started" and network setup got broken.
- bsc#903190
- Recognized netcard with sub_class_id 07 as InfiniBand (ib) which
now are not filtered out (knut.anderssen@suse.com).
- 3.1.143
* Fri Jan 29 2016 knut.anderssen@suse.com
- Removed old testsuites tests and autotools, so yast2-testsuite
is not required anymore (fate#314695).
- 3.1.142
* Fri Jan 22 2016 mvidner@suse.com
- Fixed an Internal error when aborting the configuration of a
WiFi interface (bsc#950902).
- 3.1.141
* Wed Dec 02 2015 mfilka@suse.com
- bnc#957377
- When exporting AutoYaST profile, it contains dns configuration
even when this config was provided via linuxrc.
- 3.1.140
* Mon Nov 30 2015 mfilka@suse.com
- bnc#951330
- drop record from /etc/hosts when deleting nic configuration
- bsc#954412 (igonzalezsosa@suse.com)
- Fix validation of AutoYaST profiles
- 3.1.139
* Wed Nov 25 2015 mfilka@suse.com
- bnc#956605
- Write udev rules for renamed devices for non ssh / vnc AutoYaST
installations
- 3.1.138
* Mon Nov 23 2015 mfilka@suse.com
- bnc#956012
- When exporting AutoYaST profile, it contains route definitions
even when these routes were configured using linuxrc.
- 3.1.137
* Mon Nov 16 2015 mfilka@suse.com
- bnc#955217
- do not raise internal error during AY installation with profile
containing device renaming rule for unconfigured interface
- 3.1.136
* Mon Nov 16 2015 mfilka@suse.com
- bnc#944349
- do not set links down when running AY installation over vnc.
VNC installation do not freeze.
- renaming network devices during ssh/vnc installation is
supported
-3.1.135
* Sun Nov 08 2015 mfilka@suse.com
- bnc#944349
- do not set links down when running AY installation over ssh.
SSH installation do not freeze.
- 3.1.134
* Thu Oct 08 2015 mvidner@suse.com
- Fixed "Relax-NG parser error : Some defines for ipv6_forward
needs the combine attribute" when checking validity
of any AutoYaST profile (bsc#948206).
- 3.1.133
* Tue Oct 06 2015 mfilka@suse.com
- bnc#900647
- fixed to accept an empty domain in /etc/hostname
- 3.1.132
* Thu Oct 01 2015 mvidner@suse.com
- Moved "Network Settings" into "System" group also in the Gnome/GTK
control center (FATE#318804, bsc#867809).
- 3.1.131
* Wed Sep 23 2015 mfilka@suse.com
- bnc#866742
- Do not fail with internal error when cloning configuration
twice in a row
- 3.1.130
* Wed Sep 16 2015 mfilka@suse.com
- bnc#945947
- Routing module returns correct return code when invoked from
command line
- 3.1.129
* Thu Aug 27 2015 mfilka@suse.com
- bnc#846201
- made bridge port selection persistent across tab switching
- 3.1.128
* Tue Aug 18 2015 mfilka@suse.com
- bnc#940892
- fixed internal error when importing AY profile
- 3.1.127
* Tue Aug 18 2015 igonzalezsosa@suse.com
- bsc#941948
- lan_auto client returns value properly
- 3.1.126
* Mon Aug 10 2015 mfilka@suse.com
- bnc#916013
- IPv4 forwarding always enabled upon finishing setup
- 3.1.125
* Wed Aug 05 2015 mfilka@suse.com
- bnc#916013
- IPv6 forwarding setup is stored persistently
- 3.1.124
* Fri Jul 31 2015 ancor@suse.com
- bnc#940192, bnc#935937
- fixed crash deleting interfaces using CLI (yast lan delete)
- 3.1.123
* Wed Jul 01 2015 mfilka@suse.com
- bnc#864264
- fixed internal error in adding alias
- 3.1.122
* Tue Jun 30 2015 mvidner@suse.com
- Fixed warnings like 'duplicated key at line 230 ignored:
"rt73usb"' (boo#930870)
(recording a fix present in 3.1.116 already).
* Thu Jun 25 2015 mfilka@suse.com
- bnc#922765, bnc#923990
- fixed default domain proposal
- 3.1.121
* Thu Jun 18 2015 mfilka@suse.com
- bnc#930448
- display proper startmode description in Overview dialogue
- 3.1.120
* Mon Jun 15 2015 igonzalezsosa@suse.com
- Fix handling of AutoYaST parameter keep_install_network
- 3.1.119
* Thu Jun 11 2015 mfilka@suse.com
- fate#318804
- moved "Network Settings" into "System" group in YaST control
centre
- 3.1.118
* Wed Jun 10 2015 mfilka@suse.com
- bnc#934180
- fixed internal error in lan AutoYaST client.
- 3.1.117
* Mon Jun 08 2015 mfilka@suse.com
- bnc#874259
- keep device configuration provided via linuxrc when autoyast
keep_install_network is set
- 3.1.116
* Mon May 18 2015 locilka@suse.com
- bsc#916376
- proposing iSCSI-related configuration in firewall proposal
in first stage if iSCSI is in use
- 3.1.115
* Mon Apr 27 2015 mfilka@suse.com
- bnc#912904
- do not crash when adding new device and proposed configuration
name is changed to new one
- bnc#914833
- do not crash when renaming virtual device via hardware tab
- bnc#910337
- initialize configuration name in Hardware tab correctly. It
means according device type. Also uses custom name if user
used nonstandard one.
- bnc#905738
- udev rules provided by AutoYaST profile gets applied
- bnc#918356
- populate bond slave candidates list with proper device names
- 3.1.114
* Wed Jan 28 2015 lslezak@suse.cz
- fixed a build failure when building against the latest yast2
package
- 3.1.113
* Tue Dec 23 2014 mvidner@suse.com
- Removed a bash specific post script with a workaround
for an ancient bug (bnc#39842).
- 3.1.112
* Thu Dec 04 2014 jreidinger@suse.com
- remove X-KDE-Library from desktop file (bnc#899104)
* Fri Nov 28 2014 mfilka@suse.com
- bnc#906694
- fixed exception raised due to modifying frozen string when
running in localized mode
- 3.1.110
* Fri Oct 17 2014 mfilka@suse.com
- bnc#898250, bnc#899363
- ignore /etc/install.inf:usessh flag when the file is present in
installed system and always reload / restart network service in
case of updated configuration
- 3.1.109
/usr/lib/YaST2/servers_non_y2 /usr/lib/YaST2/servers_non_y2/ag_udev_persistent /usr/share/YaST2/clients /usr/share/YaST2/clients/dns.rb /usr/share/YaST2/clients/host.rb /usr/share/YaST2/clients/host_auto.rb /usr/share/YaST2/clients/inst_lan.rb /usr/share/YaST2/clients/inst_setup_dhcp.rb /usr/share/YaST2/clients/lan.rb /usr/share/YaST2/clients/lan_auto.rb /usr/share/YaST2/clients/lan_export.rb /usr/share/YaST2/clients/network.rb /usr/share/YaST2/clients/network_proposal.rb /usr/share/YaST2/clients/remote.rb /usr/share/YaST2/clients/remote_proposal.rb /usr/share/YaST2/clients/routing.rb /usr/share/YaST2/clients/save_network.rb /usr/share/YaST2/data /usr/share/YaST2/data/network /usr/share/YaST2/data/network/firmwares.yml /usr/share/YaST2/include /usr/share/YaST2/include/network /usr/share/YaST2/include/network/complex.rb /usr/share/YaST2/include/network/lan /usr/share/YaST2/include/network/lan/address.rb /usr/share/YaST2/include/network/lan/cmdline.rb /usr/share/YaST2/include/network/lan/complex.rb /usr/share/YaST2/include/network/lan/dhcp.rb /usr/share/YaST2/include/network/lan/hardware.rb /usr/share/YaST2/include/network/lan/help.rb /usr/share/YaST2/include/network/lan/s390.rb /usr/share/YaST2/include/network/lan/wizards.rb /usr/share/YaST2/include/network/routines.rb /usr/share/YaST2/include/network/runtime.rb /usr/share/YaST2/include/network/services /usr/share/YaST2/include/network/services/dns.rb /usr/share/YaST2/include/network/services/host.rb /usr/share/YaST2/include/network/services/routing.rb /usr/share/YaST2/include/network/widgets.rb /usr/share/YaST2/lib /usr/share/YaST2/lib/cfa /usr/share/YaST2/lib/cfa/generic_sysconfig.rb /usr/share/YaST2/lib/cfa/hosts.rb /usr/share/YaST2/lib/cfa/interface_file.rb /usr/share/YaST2/lib/cfa/nm_connection.rb /usr/share/YaST2/lib/cfa/routes_file.rb /usr/share/YaST2/lib/installation /usr/share/YaST2/lib/installation/console /usr/share/YaST2/lib/installation/console/plugins /usr/share/YaST2/lib/installation/console/plugins/network_button.rb /usr/share/YaST2/lib/installation/console/plugins/proxy_button.rb /usr/share/YaST2/lib/network /usr/share/YaST2/lib/network/clients /usr/share/YaST2/lib/network/clients/inst_lan.rb /usr/share/YaST2/lib/network/clients/inst_setup_dhcp.rb /usr/share/YaST2/lib/network/clients/network_proposal.rb /usr/share/YaST2/lib/network/clients/save_network.rb /usr/share/YaST2/lib/network/confirm_virt_proposal.rb /usr/share/YaST2/lib/network/install_inf_convertor.rb /usr/share/YaST2/lib/network/network_autoconfiguration.rb /usr/share/YaST2/lib/network/network_autoyast.rb /usr/share/YaST2/lib/network/wicked.rb /usr/share/YaST2/lib/y2network /usr/share/YaST2/lib/y2network/autoinst /usr/share/YaST2/lib/y2network/autoinst/config.rb /usr/share/YaST2/lib/y2network/autoinst/config_reader.rb /usr/share/YaST2/lib/y2network/autoinst/dns_reader.rb /usr/share/YaST2/lib/y2network/autoinst/hostname_reader.rb /usr/share/YaST2/lib/y2network/autoinst/interfaces_reader.rb /usr/share/YaST2/lib/y2network/autoinst/routing_reader.rb /usr/share/YaST2/lib/y2network/autoinst/s390_devices_reader.rb /usr/share/YaST2/lib/y2network/autoinst/type_detector.rb /usr/share/YaST2/lib/y2network/autoinst/udev_rules_reader.rb /usr/share/YaST2/lib/y2network/autoinst_profile /usr/share/YaST2/lib/y2network/autoinst_profile/alias_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/dns_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/host_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/interface_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/interfaces_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/networking_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/route_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/routing_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/s390_device_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/s390_devices_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/udev_rule_section.rb /usr/share/YaST2/lib/y2network/autoinst_profile/udev_rules_section.rb /usr/share/YaST2/lib/y2network/backend.rb /usr/share/YaST2/lib/y2network/backends /usr/share/YaST2/lib/y2network/backends.rb /usr/share/YaST2/lib/y2network/backends/netconfig.rb /usr/share/YaST2/lib/y2network/backends/network_manager.rb /usr/share/YaST2/lib/y2network/backends/none.rb /usr/share/YaST2/lib/y2network/backends/wicked.rb /usr/share/YaST2/lib/y2network/bitrate.rb /usr/share/YaST2/lib/y2network/boot_protocol.rb /usr/share/YaST2/lib/y2network/can_be_copied.rb /usr/share/YaST2/lib/y2network/clients /usr/share/YaST2/lib/y2network/clients/auto.rb /usr/share/YaST2/lib/y2network/clients/dns.rb /usr/share/YaST2/lib/y2network/clients/routing.rb /usr/share/YaST2/lib/y2network/config.rb /usr/share/YaST2/lib/y2network/config_reader.rb /usr/share/YaST2/lib/y2network/config_writer.rb /usr/share/YaST2/lib/y2network/config_writers /usr/share/YaST2/lib/y2network/config_writers/dns_writer.rb /usr/share/YaST2/lib/y2network/config_writers/hostname_writer.rb /usr/share/YaST2/lib/y2network/config_writers/interfaces_writer.rb /usr/share/YaST2/lib/y2network/connection_config /usr/share/YaST2/lib/y2network/connection_config.rb /usr/share/YaST2/lib/y2network/connection_config/base.rb /usr/share/YaST2/lib/y2network/connection_config/bonding.rb /usr/share/YaST2/lib/y2network/connection_config/bridge.rb /usr/share/YaST2/lib/y2network/connection_config/ctc.rb /usr/share/YaST2/lib/y2network/connection_config/dummy.rb /usr/share/YaST2/lib/y2network/connection_config/ethernet.rb /usr/share/YaST2/lib/y2network/connection_config/hsi.rb /usr/share/YaST2/lib/y2network/connection_config/infiniband.rb /usr/share/YaST2/lib/y2network/connection_config/ip_config.rb /usr/share/YaST2/lib/y2network/connection_config/lcs.rb /usr/share/YaST2/lib/y2network/connection_config/qeth.rb /usr/share/YaST2/lib/y2network/connection_config/tap.rb /usr/share/YaST2/lib/y2network/connection_config/tun.rb /usr/share/YaST2/lib/y2network/connection_config/usb.rb /usr/share/YaST2/lib/y2network/connection_config/vlan.rb /usr/share/YaST2/lib/y2network/connection_config/wireless.rb /usr/share/YaST2/lib/y2network/connection_configs_collection.rb /usr/share/YaST2/lib/y2network/dialogs /usr/share/YaST2/lib/y2network/dialogs/add_interface.rb /usr/share/YaST2/lib/y2network/dialogs/additional_address.rb /usr/share/YaST2/lib/y2network/dialogs/edit_interface.rb /usr/share/YaST2/lib/y2network/dialogs/rename_interface.rb /usr/share/YaST2/lib/y2network/dialogs/route.rb /usr/share/YaST2/lib/y2network/dialogs/s390_ctc_activation.rb /usr/share/YaST2/lib/y2network/dialogs/s390_device_activation.rb /usr/share/YaST2/lib/y2network/dialogs/s390_lcs_activation.rb /usr/share/YaST2/lib/y2network/dialogs/s390_qeth_activation.rb /usr/share/YaST2/lib/y2network/dialogs/wireless_expert_settings.rb /usr/share/YaST2/lib/y2network/dialogs/wireless_networks.rb /usr/share/YaST2/lib/y2network/dialogs/wireless_wep_keys.rb /usr/share/YaST2/lib/y2network/dns.rb /usr/share/YaST2/lib/y2network/driver.rb /usr/share/YaST2/lib/y2network/hostname.rb /usr/share/YaST2/lib/y2network/hwinfo.rb /usr/share/YaST2/lib/y2network/interface.rb /usr/share/YaST2/lib/y2network/interface_config_builder.rb /usr/share/YaST2/lib/y2network/interface_config_builders /usr/share/YaST2/lib/y2network/interface_config_builders/bonding.rb /usr/share/YaST2/lib/y2network/interface_config_builders/bridge.rb /usr/share/YaST2/lib/y2network/interface_config_builders/ctc.rb /usr/share/YaST2/lib/y2network/interface_config_builders/dummy.rb /usr/share/YaST2/lib/y2network/interface_config_builders/infiniband.rb /usr/share/YaST2/lib/y2network/interface_config_builders/lcs.rb /usr/share/YaST2/lib/y2network/interface_config_builders/qeth.rb /usr/share/YaST2/lib/y2network/interface_config_builders/tap.rb /usr/share/YaST2/lib/y2network/interface_config_builders/tun.rb /usr/share/YaST2/lib/y2network/interface_config_builders/vlan.rb /usr/share/YaST2/lib/y2network/interface_config_builders/wireless.rb /usr/share/YaST2/lib/y2network/interface_type.rb /usr/share/YaST2/lib/y2network/interfaces_collection.rb /usr/share/YaST2/lib/y2network/ip_address.rb /usr/share/YaST2/lib/y2network/ipoib_mode.rb /usr/share/YaST2/lib/y2network/issues_result.rb /usr/share/YaST2/lib/y2network/network_manager /usr/share/YaST2/lib/y2network/network_manager/config_writer.rb /usr/share/YaST2/lib/y2network/network_manager/connection_config_writer.rb /usr/share/YaST2/lib/y2network/network_manager/connection_config_writers /usr/share/YaST2/lib/y2network/network_manager/connection_config_writers/base.rb /usr/share/YaST2/lib/y2network/network_manager/connection_config_writers/bonding.rb /usr/share/YaST2/lib/y2network/network_manager/connection_config_writers/bridge.rb /usr/share/YaST2/lib/y2network/network_manager/connection_config_writers/ethernet.rb /usr/share/YaST2/lib/y2network/network_manager/connection_config_writers/hsi.rb /usr/share/YaST2/lib/y2network/network_manager/connection_config_writers/qeth.rb /usr/share/YaST2/lib/y2network/network_manager/connection_config_writers/vlan.rb /usr/share/YaST2/lib/y2network/network_manager/connection_config_writers/wireless.rb /usr/share/YaST2/lib/y2network/none /usr/share/YaST2/lib/y2network/none/config_reader.rb /usr/share/YaST2/lib/y2network/none/config_writer.rb /usr/share/YaST2/lib/y2network/ntp_server.rb /usr/share/YaST2/lib/y2network/physical_interface.rb /usr/share/YaST2/lib/y2network/presenters /usr/share/YaST2/lib/y2network/presenters/config_summary.rb /usr/share/YaST2/lib/y2network/presenters/dns_summary.rb /usr/share/YaST2/lib/y2network/presenters/interface_status.rb /usr/share/YaST2/lib/y2network/presenters/interface_summary.rb /usr/share/YaST2/lib/y2network/presenters/interfaces_summary.rb /usr/share/YaST2/lib/y2network/presenters/proposal_summary.rb /usr/share/YaST2/lib/y2network/presenters/routing_summary.rb /usr/share/YaST2/lib/y2network/presenters/s390_group_device_summary.rb /usr/share/YaST2/lib/y2network/presenters/summary.rb /usr/share/YaST2/lib/y2network/proposal_settings.rb /usr/share/YaST2/lib/y2network/route.rb /usr/share/YaST2/lib/y2network/routing.rb /usr/share/YaST2/lib/y2network/routing_table.rb /usr/share/YaST2/lib/y2network/s390_device_activator.rb /usr/share/YaST2/lib/y2network/s390_device_activators /usr/share/YaST2/lib/y2network/s390_device_activators/ctc.rb /usr/share/YaST2/lib/y2network/s390_device_activators/lcs.rb /usr/share/YaST2/lib/y2network/s390_device_activators/qeth.rb /usr/share/YaST2/lib/y2network/s390_group_device.rb /usr/share/YaST2/lib/y2network/s390_group_devices_collection.rb /usr/share/YaST2/lib/y2network/sequences /usr/share/YaST2/lib/y2network/sequences/interface.rb /usr/share/YaST2/lib/y2network/serializer /usr/share/YaST2/lib/y2network/serializer/route_sysconfig.rb /usr/share/YaST2/lib/y2network/startmode.rb /usr/share/YaST2/lib/y2network/startmodes /usr/share/YaST2/lib/y2network/startmodes.rb /usr/share/YaST2/lib/y2network/startmodes/auto.rb /usr/share/YaST2/lib/y2network/startmodes/hotplug.rb /usr/share/YaST2/lib/y2network/startmodes/ifplugd.rb /usr/share/YaST2/lib/y2network/startmodes/manual.rb /usr/share/YaST2/lib/y2network/startmodes/nfsroot.rb /usr/share/YaST2/lib/y2network/startmodes/off.rb /usr/share/YaST2/lib/y2network/type_detector.rb /usr/share/YaST2/lib/y2network/udev_rule.rb /usr/share/YaST2/lib/y2network/udev_rule_part.rb /usr/share/YaST2/lib/y2network/virtual_interface.rb /usr/share/YaST2/lib/y2network/virtualization_config.rb /usr/share/YaST2/lib/y2network/wicked /usr/share/YaST2/lib/y2network/wicked/config_reader.rb /usr/share/YaST2/lib/y2network/wicked/config_writer.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_reader.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/base.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/bonding.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/bridge.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/ctc.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/dummy.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/ethernet.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/hsi.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/infiniband.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/lcs.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/qeth.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/tap.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/tun.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/usb.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/vlan.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_readers/wireless.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writer.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/base.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/bonding.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/bridge.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/ctc.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/dummy.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/ethernet.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/hsi.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/infiniband.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/lcs.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/qeth.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/tap.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/tun.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/usb.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/vlan.rb /usr/share/YaST2/lib/y2network/wicked/connection_config_writers/wireless.rb /usr/share/YaST2/lib/y2network/wicked/connection_configs_reader.rb /usr/share/YaST2/lib/y2network/wicked/dns_reader.rb /usr/share/YaST2/lib/y2network/wicked/hostname_reader.rb /usr/share/YaST2/lib/y2network/wicked/interfaces_reader.rb /usr/share/YaST2/lib/y2network/wicked/type_detector.rb /usr/share/YaST2/lib/y2network/widgets /usr/share/YaST2/lib/y2network/widgets/add_interface.rb /usr/share/YaST2/lib/y2network/widgets/additional_addresses.rb /usr/share/YaST2/lib/y2network/widgets/address_tab.rb /usr/share/YaST2/lib/y2network/widgets/blink_button.rb /usr/share/YaST2/lib/y2network/widgets/bond_options.rb /usr/share/YaST2/lib/y2network/widgets/bond_port.rb /usr/share/YaST2/lib/y2network/widgets/bond_ports_tab.rb /usr/share/YaST2/lib/y2network/widgets/boot_protocol.rb /usr/share/YaST2/lib/y2network/widgets/bridge_ports.rb /usr/share/YaST2/lib/y2network/widgets/bridge_ports_tab.rb /usr/share/YaST2/lib/y2network/widgets/client_cert_path.rb /usr/share/YaST2/lib/y2network/widgets/client_key.rb /usr/share/YaST2/lib/y2network/widgets/delete_interface.rb /usr/share/YaST2/lib/y2network/widgets/destination.rb /usr/share/YaST2/lib/y2network/widgets/devices.rb /usr/share/YaST2/lib/y2network/widgets/driver.rb /usr/share/YaST2/lib/y2network/widgets/edit_interface.rb /usr/share/YaST2/lib/y2network/widgets/ethtools_options.rb /usr/share/YaST2/lib/y2network/widgets/firewall_zone.rb /usr/share/YaST2/lib/y2network/widgets/gateway.rb /usr/share/YaST2/lib/y2network/widgets/general_tab.rb /usr/share/YaST2/lib/y2network/widgets/hardware_tab.rb /usr/share/YaST2/lib/y2network/widgets/hostname.rb /usr/share/YaST2/lib/y2network/widgets/ifplugd_priority.rb /usr/share/YaST2/lib/y2network/widgets/interface_description.rb /usr/share/YaST2/lib/y2network/widgets/interface_name.rb /usr/share/YaST2/lib/y2network/widgets/interface_naming.rb /usr/share/YaST2/lib/y2network/widgets/interface_type.rb /usr/share/YaST2/lib/y2network/widgets/interfaces_table.rb /usr/share/YaST2/lib/y2network/widgets/ip4_forwarding.rb /usr/share/YaST2/lib/y2network/widgets/ip6_forwarding.rb /usr/share/YaST2/lib/y2network/widgets/ip_address.rb /usr/share/YaST2/lib/y2network/widgets/ipoib_mode.rb /usr/share/YaST2/lib/y2network/widgets/kernel_module.rb /usr/share/YaST2/lib/y2network/widgets/kernel_options.rb /usr/share/YaST2/lib/y2network/widgets/mtu.rb /usr/share/YaST2/lib/y2network/widgets/netmask.rb /usr/share/YaST2/lib/y2network/widgets/path_widget.rb /usr/share/YaST2/lib/y2network/widgets/port_items.rb /usr/share/YaST2/lib/y2network/widgets/remote_ip.rb /usr/share/YaST2/lib/y2network/widgets/renaming_mechanism.rb /usr/share/YaST2/lib/y2network/widgets/route_options.rb /usr/share/YaST2/lib/y2network/widgets/routing_buttons.rb /usr/share/YaST2/lib/y2network/widgets/routing_table.rb /usr/share/YaST2/lib/y2network/widgets/s390_button.rb /usr/share/YaST2/lib/y2network/widgets/s390_channels.rb /usr/share/YaST2/lib/y2network/widgets/s390_common.rb /usr/share/YaST2/lib/y2network/widgets/server_ca_path.rb /usr/share/YaST2/lib/y2network/widgets/startmode.rb /usr/share/YaST2/lib/y2network/widgets/tunnel.rb /usr/share/YaST2/lib/y2network/widgets/udev_rules.rb /usr/share/YaST2/lib/y2network/widgets/vlan_id.rb /usr/share/YaST2/lib/y2network/widgets/vlan_interface.rb /usr/share/YaST2/lib/y2network/widgets/wireless_auth.rb /usr/share/YaST2/lib/y2network/widgets/wireless_auth_mode.rb /usr/share/YaST2/lib/y2network/widgets/wireless_eap.rb /usr/share/YaST2/lib/y2network/widgets/wireless_eap_mode.rb /usr/share/YaST2/lib/y2network/widgets/wireless_essid.rb /usr/share/YaST2/lib/y2network/widgets/wireless_expert.rb /usr/share/YaST2/lib/y2network/widgets/wireless_mode.rb /usr/share/YaST2/lib/y2network/widgets/wireless_networks.rb /usr/share/YaST2/lib/y2network/widgets/wireless_password.rb /usr/share/YaST2/lib/y2network/widgets/wireless_scan_button.rb /usr/share/YaST2/lib/y2network/widgets/wireless_tab.rb /usr/share/YaST2/lib/y2network/wireless_auth_mode.rb /usr/share/YaST2/lib/y2network/wireless_cell.rb /usr/share/YaST2/lib/y2network/wireless_mode.rb /usr/share/YaST2/lib/y2network/wireless_network.rb /usr/share/YaST2/lib/y2network/wireless_scanner.rb /usr/share/YaST2/lib/y2remote /usr/share/YaST2/lib/y2remote/clients /usr/share/YaST2/lib/y2remote/clients/proposal.rb /usr/share/YaST2/lib/y2remote/dialogs /usr/share/YaST2/lib/y2remote/dialogs/remote.rb /usr/share/YaST2/lib/y2remote/display_manager.rb /usr/share/YaST2/lib/y2remote/modes /usr/share/YaST2/lib/y2remote/modes.rb /usr/share/YaST2/lib/y2remote/modes/base.rb /usr/share/YaST2/lib/y2remote/modes/manager.rb /usr/share/YaST2/lib/y2remote/modes/socket_based.rb /usr/share/YaST2/lib/y2remote/modes/vnc.rb /usr/share/YaST2/lib/y2remote/modes/web.rb /usr/share/YaST2/lib/y2remote/remote.rb /usr/share/YaST2/lib/y2remote/widgets /usr/share/YaST2/lib/y2remote/widgets/remote.rb /usr/share/YaST2/modules /usr/share/YaST2/modules/DNS.rb /usr/share/YaST2/modules/Host.rb /usr/share/YaST2/modules/Lan.rb /usr/share/YaST2/modules/NetHwDetection.rb /usr/share/YaST2/modules/Routing.rb /usr/share/YaST2/schema /usr/share/YaST2/schema/autoyast /usr/share/YaST2/schema/autoyast/rnc /usr/share/YaST2/schema/autoyast/rnc/host.rnc /usr/share/YaST2/schema/autoyast/rnc/networking.rnc /usr/share/YaST2/scrconf /usr/share/YaST2/scrconf/cfg_dhcp.scr /usr/share/YaST2/scrconf/cfg_network.scr /usr/share/YaST2/scrconf/cfg_udev_persistent.scr /usr/share/YaST2/scrconf/etc_hosts.scr /usr/share/YaST2/scrconf/routes.scr /usr/share/applications/YaST2 /usr/share/applications/YaST2/org.opensuse.yast.Host.desktop /usr/share/applications/YaST2/org.opensuse.yast.LAN.desktop /usr/share/applications/YaST2/org.opensuse.yast.Remote.desktop /usr/share/doc/packages/yast2-network /usr/share/doc/packages/yast2-network/README.md /usr/share/icons /usr/share/icons/hicolor /usr/share/icons/hicolor/scalable /usr/share/icons/hicolor/scalable/apps /usr/share/icons/hicolor/scalable/apps/yast-host.svg /usr/share/icons/hicolor/scalable/apps/yast-lan.svg /usr/share/icons/hicolor/scalable/apps/yast-remote.svg /usr/share/licenses/yast2-network /usr/share/licenses/yast2-network/COPYING /usr/share/metainfo /usr/share/metainfo/org.opensuse.yast.Host.metainfo.xml /usr/share/metainfo/org.opensuse.yast.LAN.metainfo.xml /usr/share/metainfo/org.opensuse.yast.Remote.metainfo.xml
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Apr 9 17:06:41 2024