fish ships with a large number of builtin commands, shellscript functions and external commands. These are all described below.
Almost all fish commands respond to the -h or --help options to display their relevant help, also accessible using the help and man commands, like so:
echo -h echo --help # Prints help to the terminal window man echo # Displays the man page in the system pager # (normally 'less', 'more' or 'most'). help echo # Open a web browser to show the relevant documentation
abbr --add word phrase... abbr --rename word new_word abbr --show abbr --list abbr --erase word
abbr manipulates the list of abbreviations that fish will expand.
Abbreviations are user-defined character sequences or words that are replaced with longer phrases after they are entered. For example, a frequently-run command such as git checkout can be abbreviated to gco. After entering gco and pressing Space or Enter, the full text git checkout will appear in the command line.
Abbreviations are stored in a variable named fish_user_abbreviations. This is automatically created as a universal variable the first time an abbreviation is created. If you want your abbreviations to be private to a particular fish session you can put the following in your *~/.config/fish/config.fish* file before you define your first abbrevation:
if status --is-interactive set -g fish_user_abbreviations abbr --add first 'echo my first abbreviation' abbr --add second 'echo my second abbreviation' # etcetera end
You can create abbreviations directly on the command line and they will be saved automatically and made visible to other fish sessions if fish_user_abbreviations is a universal variable. If you keep the variable as universal, abbr --add statements in config.fish will do nothing but slow down startup slightly.
The following parameters are available:
-a WORD PHRASE or --add WORD PHRASE Adds a new abbreviation, causing WORD to be expanded to PHRASE.-r WORD NEW_WORD or --rename WORD NEW_WORD Renames an abbreviation, from WORD to NEW_WORD.-s or --show Show all abbreviated words and their expanded phrases in a manner suitable for export and import.-l or --list Lists all abbreviated words.-e WORD or --erase WORD Erase the abbreviation WORD.Note: fish version 2.1 supported -a WORD=PHRASE. This syntax is now deprecated but will still be converted.
abbr -a gco git checkout
Add a new abbreviation where gco will be replaced with git checkout.
abbr -r gco gch
Renames an existing abbreviation from gco to gch.
abbr -e gco
Erase the gco abbreviation.
ssh another_host abbr -s | source
Import the abbreviations defined on another_host over SSH.
Back to command index.
alias alias NAME DEFINITION alias NAME=DEFINITION
alias is a simple wrapper for the function builtin, which creates a function wrapping a command. It has similar syntax to POSIX shell alias. For other uses, it is recommended to define a function.
fish marks functions that have been created by alias by including the command used to create them in the function description. You can list alias-created functions by running alias without arguments. They must be erased using functions -e.
NAME is the name of the aliasDEFINITION is the actual command to execute. The string $argv will be appended.You cannot create an alias to a function with the same name. Note that spaces need to be escaped in the call to alias just like at the command line, even inside quoted parts.
The following code will create rmi, which runs rm with additional arguments on every invocation.
alias rmi="rm -i" # This is equivalent to entering the following function: function rmi --wraps rm --description 'alias rmi=rm -i' rm -i $argv end # This needs to have the spaces escaped or "Chrome.app..." will be seen as an argument to "/Applications/Google": alias chrome='/Applications/Google\ Chrome.app/Contents/MacOS/Google\ Chrome banana'
Back to command index.
COMMAND1; and COMMAND2
and is used to execute a command if the current exit status (as set by the previous command) is 0.
and statements may be used as part of the condition in an if or while block. See the documentation for if and while for examples.
and does not change the current exit status itself, but the command it runs most likely will. The exit status of the last foreground command to exit can always be accessed using the $status variable.
The following code runs the make command to build a program. If the build succeeds, make's exit status is 0, and the program is installed. If either step fails, the exit status is 1, and make clean is run, which removes the files created by the build process.
make; and make install; or make clean
Back to command index.
argparse [OPTIONS] OPTION_SPEC... -- [ARG...]
This command makes it easy for fish scripts and functions to handle arguments in a manner 100% identical to how fish builtin commands handle their arguments. You pass a sequence of arguments that define the options recognized, followed by a literal --, then the arguments to be parsed (which might also include a literal --). More on this in the usage section below.
Each OPTION_SPEC can be written in the domain specific language described below or created using the companion fish_opt command. All OPTION_SPECs must appear after any argparse flags and before the -- that separates them from the arguments to be parsed.
Each option that is seen in the ARG list will result in a var name of the form _flag_X, where X is the short flag letter and the long flag name. The OPTION_SPEC always requires a short flag even if it can't be used. So there will always be _flag_X var set using the short flag letter if the corresponding short or long flag is seen. The long flag name var (e.g., _flag_help) will only be defined, obviously, if the OPTION_SPEC includes a long flag name.
For example _flag_h and _flag_help if -h or --help is seen. The var will be set with local scope (i.e., as if the script had done set -l _flag_X). If the flag is a boolean (that is, does not have an associated value) the values are the short and long flags seen. If the option is not a boolean flag the values will be zero or more values corresponding to the values collected when the ARG list is processed. If the flag was not seen the flag var will not be set.
The following argparse options are available. They must appear before all OPTION_SPECs:
-n or --name is the command name to insert into any error messages. If you don't provide this value argparse will be used.-x or --exclusive should be followed by a comma separated list of short of long options that are mutually exclusive. You can use this option more than once to define multiple sets of mutually exclusive options.-N or --min-args is followed by an integer that defines the minimum number of acceptable non-option arguments. The default is zero.-X or --max-args is followed by an integer that defines the maximum number of acceptable non-option arguments. The default is infinity.-s or --stop-nonopt causes scanning the arguments to stop as soon as the first non-option argument is seen. Using this arg is equivalent to calling the C function getopt_long() with the short options starting with a + symbol. This is sometimes known as "POSIXLY CORRECT". If this flag is not used then arguments are reordered (i.e., permuted) so that all non-option arguments are moved after option arguments. This mode has several uses but the main one is to implement a command that has subcommands.-h or --help displays help about using this command.Using this command involves passing two sets of arguments separated by --. The first set consists of one or more option specifications (OPTION_SPEC above) and options that modify the behavior of argparse. These must be listed before the -- argument. The second set are the arguments to be parsed in accordance with the option specifications. They occur after the -- argument and can be empty. More about this below but here is a simple example that might be used in a function named my_function:
argparse --name=my_function 'h/help' 'n/name:' -- $argv or return
If $argv is empty then there is nothing to parse and argparse returns zero to indicate success. If $argv is not empty then it is checked for flags -h, --help, -n and --name. If they are found they are removed from the arguments and local variables (more on this below) are set so the script can determine which options were seen. Assuming $argv doesn't have any errors, such as a missing mandatory value for an option, then argparse exits with status zero. Otherwise it writes appropriate error messages to stderr and exits with a status of one.
Not including a -- argument is an error condition. You do not have to include any arguments after the -- but you must include the --. For example, this is acceptable:
set -l argv argparse 'h/help' 'n/name' -- $argv
But this is not:
set -l argv argparse 'h/help' 'n/name' $argv
The first -- seen is what allows the argparse command to reliably seperate the option specifications from the command arguments.
Each option specification is a string composed of
-123 is valid. The short flag "#" must be followed by "-" (since the short name isn't otherwise valid since _flag_# is not a valid var name) and must but followed by a long flag name with no modifiers./ if the short flag can be used by someone invoking your command else - if it should not be exposed as a valid short flag. If there is no long flag name these characters should be omitted. You can also specify a '#' to indicate the short and long flag names can be used and the value can be specified as an implicit int; i.e., a flag of the form -NNN.= if it requires a value and only the last instance of the flag is saved, else=? it takes an optional value and only the last instance of the flag is saved, else=+ if it requires a value each instance of the flag is saved.! followed by fish script to validate the value. Typically this will be a function to run. If the return status is zero the value for the flag is valid. If non-zero the value is invalid. Any error messages should be written to stdout (not stderr). See the section on Flag Value Validation for more information.See the fish_opt command for a friendlier but more verbose way to create option specifications.
In the following examples if a flag is not seen when parsing the arguments then the corresponding _flag_X var(s) will not be set.
It is common to want to validate the the value provided for an option satisfies some criteria. For example, that it is a valid integer within a specific range. You can always do this after argparse returns but you can also request that argparse perform the validation by executing arbitrary fish script. To do so simply append an ! (exclamation-mark) then the fish script to be run. When that code is executed three vars will be defined:
_argparse_cmd will be set to the value of the value of the argparse --name value._flag_name will be set to the short or long flag that being processed._flag_value will be set to the value associated with the flag being processed.If you do this via a function it should be defined with the --no-scope-shadowing flag. Otherwise it won't have access to those variables.
The script should write any error messages to stdout, not stderr. It should return a status of zero if the flag value is valid otherwise a non-zero status to indicate it is invalid.
Fish ships with a _validate_int function that accepts a --min and --max flag. Let's say your command accepts a -m or --max flag and the minimum allowable value is zero and the maximum is 5. You would define the option like this: m/max=!_validate_int --min 0 --max 5. The default if you just call _validate_int without those flags is to simply check that the value is a valid integer with no limits on the min or max value allowed.
Some OPTION_SPEC examples:
h/help means that both -h and --help are valid. The flag is a boolean and can be used more than once. If either flag is used then _flag_h and _flag_help will be set to the count of how many times either flag was seen.h-help means that only --help is valid. The flag is a boolean and can be used more than once. If the long flag is used then _flag_h and _flag_help will be set to the count of how many times the long flag was seen.n/name= means that both -n and --name are valid. It requires a value and can be used at most once. If the flag is seen then _flag_n and _flag_name will be set with the single mandatory value associated with the flag.n/name=? means that both -n and --name are valid. It accepts an optional value and can be used at most once. If the flag is seen then _flag_n and _flag_name will be set with the value associated with the flag if one was provided else it will be set with no values.n-name=+ means that only --name is valid. It requires a value and can be used more than once. If the flag is seen then _flag_n and _flag_name will be set with the values associated with each occurrence of the flag.x means that only -x is valid. It is a boolean can can be used more than once. If it is seen then _flag_x will be set to the count of how many times the flag was seen.x=, x=?, and x=+ are similar to the n/name examples above but there is no long flag alternative to the short flag -x.x- is not valid since there is no long flag name and therefore the short flag, -x, has to be usable. This is obviously true whether or not the specification also includes one of :, ::, +.#-max means that flags matching the regex "^--?\d+$" are valid. When seen they are assigned to the variable _flag_max. This allows any valid positive or negative integer to be specified by prefixing it with a single "-". Many commands support this idiom. For example head -3 /a/file to emit only the first three lines of /a/file.n::max means that flags matching the regex "^--?\d+$" are valid. When seen they are assigned to the variables _flag_n and _flag_max. This allows any valid positive or negative integer to be specified by prefixing it with a single "-". Many commands support this idiom. For example head -3 /a/file to emit only the first three lines of /a/file. You can also specify the value using either flag: -n NNN or --max NNN in this example.After parsing the arguments the argv var is set with local scope to any values not already consumed during flag processing. If there are not unbound values the var is set but count $argv will be zero.
If an error occurs during argparse processing it will exit with a non-zero status and appropriate error messages are written to stderr.
Prior to the addition of this builtin command in the 2.7.0 release there were two main ways to parse the arguments passed to a fish script or function. One way was to use the OS provided getopt command. The problem with that is that the GNU and BSD implementations are not compatible. Which makes using that external command difficult other than in trivial situations. The other way is to iterate over $argv and use the fish switch statement to decide how to handle the argument. That, however, involves a huge amount of boilerplate code. It is also borderline impossible to implement the same behavior as builtin commands.
Back to command index.
begin; [COMMANDS...;] end
begin is used to create a new block of code.
The block is unconditionally executed. begin; ...; end is equivalent to if true; ...; end.
begin is used to group a number of commands into a block. This allows the introduction of a new variable scope, redirection of the input or output of a set of commands as a group, or to specify precedence when using the conditional commands like and.
begin does not change the current exit status itself. After the block has completed, $status will be set to the status returned by the most recent command.
The following code sets a number of variables inside of a block scope. Since the variables are set inside the block and have local scope, they will be automatically deleted when the block ends.
\nbegin set -l PIRATE Yarrr ... end echo $PIRATE # This will not output anything, since the PIRATE variable # went out of scope at the end of the block
In the following code, all output is redirected to the file out.html.
begin echo $xml_header echo $html_header if test -e $file ... end ... end > out.html
Back to command index.
bg [PID...]
bg sends jobs to the background, resuming them if they are stopped. A background job is executed simultaneously with fish, and does not have access to the keyboard. If no job is specified, the last job to be used is put in the background. If PID is specified, the jobs with the specified process group IDs are put in the background.
The PID of the desired process is usually found by using process expansion.
When at least one of the arguments isn't a valid job specifier (i.e. PID), bg will print an error without backgrounding anything.
When all arguments are valid job specifiers, bg will background all matching jobs that exist.
bg %1 will put the job with job ID 1 in the background.
bg 123 456 789 will background 123, 456 and 789.
If only 123 and 789 exist, it will still background them and print an error about 456.
bg 123 banana or bg banana 123 will complain that "banana" is not a valid job specifier.
Back to command index.
bind [(-M | --mode) MODE] [(-m | --sets-mode) NEW_MODE] [(-k | --key)] SEQUENCE COMMAND [COMMAND...] bind [(-M | --mode) MODE] [(-k | --key)] SEQUENCE bind (-K | --key-names) [(-a | --all)] bind (-f | --function-names) bind (-L | --list-modes) bind (-e | --erase) [(-M | --mode) MODE] (-a | --all | [(-k | --key)] SEQUENCE [SEQUENCE...])
bind adds a binding for the specified key sequence to the specified command.
SEQUENCE is the character sequence to bind to. These should be written as fish escape sequences. For example, because pressing the Alt key and another character sends that character prefixed with an escape character, Alt-based key bindings can be written using the \e escape. For example, Alt-w can be written as \ew. The control character can be written in much the same way using the \c escape, for example Control-X (^X) can be written as \cx. Note that Alt-based key bindings are case sensitive and Control-based key bindings are not. This is a constraint of text-based terminals, not fish.
The default key binding can be set by specifying a SEQUENCE of the empty string (that is, '' ). It will be used whenever no other binding matches. For most key bindings, it makes sense to use the self-insert function (i.e. bind '' self-insert) as the default keybinding. This will insert any keystrokes not specifically bound to into the editor. Non- printable characters are ignored by the editor, so this will not result in control sequences being printable.
If the -k switch is used, the name of the key (such as 'down', 'up' or 'backspace') is used instead of a sequence. The names used are the same as the corresponding curses variables, but without the 'key_' prefix. (See terminfo(5) for more information, or use bind --key-names for a list of all available named keys.)
COMMAND can be any fish command, but it can also be one of a set of special input functions. These include functions for moving the cursor, operating on the kill-ring, performing tab completion, etc. Use bind --function-names for a complete list of these input functions.
When COMMAND is a shellscript command, it is a good practice to put the actual code into a function and simply bind to the function name. This way it becomes significantly easier to test the function while editing, and the result is usually more readable as well.
If such a script produces output, the script needs to finish by calling commandline -f repaint in order to tell fish that a repaint is in order.
When multiple COMMANDs are provided, they are all run in the specified order when the key is pressed. Note that special input functions cannot be combined with ordinary shell script commands. The commands must be entirely a sequence of special input functions (from bind -f) or all shell script commands (i.e., valid fish script).
If no SEQUENCE is provided, all bindings (or just the bindings in the specified MODE) are printed. If SEQUENCE is provided without COMMAND, just the binding matching that sequence is printed.
Key bindings are not saved between sessions by default. Bare bind statements in config.fish won't have any effect because it is sourced before the default keybindings are setup. To save custom keybindings, put the bind statements into a function called fish_user_key_bindings, which will be autoloaded.
Key bindings may use "modes", which mimics Vi's modal input behavior. The default mode is "default", and every bind applies to a single mode. The mode can be viewed/changed with the $fish_bind_mode variable.
The following parameters are available:
-k or --key Specify a key name, such as 'left' or 'backspace' instead of a character sequence-K or --key-names Display a list of available key names. Specifying -a or --all includes keys that don't have a known mapping-f or --function-names Display a list of available input functions-L or --list-modes Display a list of defined bind modes-M MODE or --mode MODE Specify a bind mode that the bind is used in. Defaults to "default"-m NEW_MODE or --sets-mode NEW_MODE Change the current mode to NEW_MODE after this binding is executed-e or --erase Erase the binding with the given sequence and mode instead of defining a new one. Multiple sequences can be specified with this flag. Specifying -a or --all with -M or --mode erases all binds in the given mode regardless of sequence. Specifying -a or --all without -M or --mode erases all binds in all modes regardless of sequence.-a or --all See --erase and --key-namesThe following special input functions are available:
accept-autosuggestion, accept the current autosuggestion completelybackward-char, moves one character to the leftbackward-bigword, move one whitespace-delimited word to the leftbackward-delete-char, deletes one character of input to the left of the cursorbackward-kill-bigword, move the whitespace-delimited word to the left of the cursor to the killringbackward-kill-line, move everything from the beginning of the line to the cursor to the killringbackward-kill-path-component, move one path component to the left of the cursor (everything from the last "/" or whitespace exclusive) to the killringbackward-kill-word, move the word to the left of the cursor to the killringbackward-word, move one word to the leftbeginning-of-buffer, moves to the beginning of the buffer, i.e. the start of the first linebeginning-of-history, move to the beginning of the historybeginning-of-line, move to the beginning of the linebegin-selection, start selecting textcapitalize-word, make the current word begin with a capital lettercomplete, guess the remainder of the current tokencomplete-and-search, invoke the searchable pager on completion options (for convenience, this also moves backwards in the completion pager)delete-char, delete one character to the right of the cursordowncase-word, make the current word lowercaseend-of-buffer, moves to the end of the buffer, i.e. the end of the first lineend-of-history, move to the end of the historyend-of-line, move to the end of the lineend-selection, end selecting textforward-bigword, move one whitespace-delimited word to the rightforward-char, move one character to the rightforward-word, move one word to the righthistory-search-backward, search the history for the previous matchhistory-search-forward, search the history for the next matchkill-bigword, move the next whitespace-delimited word to the killringkill-line, move everything from the cursor to the end of the line to the killringkill-selection, move the selected text to the killringkill-whole-line, move the line to the killringkill-word, move the next word to the killringsuppress-autosuggestion, remove the current autosuggestionswap-selection-start-stop, go to the other end of the highlighted text without changing the selectiontranspose-chars, transpose two characters to the left of the cursortranspose-words, transpose two words to the left of the cursorupcase-word, make the current word uppercaseyank, insert the latest entry of the killring into the bufferyank-pop, rotate to the previous entry of the killringbind \cd 'exit'
Causes fish to exit when Control-D is pressed.
bind -k ppage history-search-backward
Performs a history search when the Page Up key is pressed.
set -g fish_key_bindings fish_vi_key_bindings bind -M insert \cc kill-whole-line force-repaint
Turns on Vi key bindings and rebinds Control-C to clear the input line.
The escape key can be used standalone, for example, to switch from insertion mode to normal mode when using Vi keybindings. Escape may also be used as a "meta" key, to indicate the start of an escape sequence, such as function or arrow keys. Custom bindings can also be defined that begin with an escape character.
fish waits for a period after receiving the escape character, to determine whether it is standalone or part of an escape sequence. While waiting, additional key presses make the escape key behave as a meta key. If no other key presses come in, it is handled as a standalone escape. The waiting period is set to 300 milliseconds (0.3 seconds) in the default key bindings and 10 milliseconds in the vi key bindings. It can be configured by setting the fish_escape_delay_ms variable to a value between 10 and 5000 ms. It is recommended that this be a universal variable that you set once from an interactive session.
Note: fish 2.2.0 and earlier used a default of 10 milliseconds, and provided no way to configure it. That effectively made it impossible to use escape as a meta key.
Back to command index.
block [OPTIONS...]
block prevents events triggered by fish or the emit command from being delivered and acted upon while the block is in place.
In functions, block can be useful while performing work that should not be interrupted by the shell.
The block can be removed. Any events which triggered while the block was in place will then be delivered.
Event blocks should not be confused with code blocks, which are created with begin, if, while or for
The following parameters are available:
-l or --local Release the block automatically at the end of the current innermost code block scope-g or --global Never automatically release the lock-e or --erase Release global block# Create a function that listens for events function --on-event foo foo; echo 'foo fired'; end # Block the delivery of events block -g emit foo # No output will be produced block -e # 'foo fired' will now be printed
Note that events are only received from the current fish process as there is no way to send events from one fish process to another.
Back to command index.
LOOP_CONSTRUCT; [COMMANDS...] break; [COMMANDS...] end
break halts a currently running loop, such as a for loop or a while loop. It is usually added inside of a conditional block such as an if statement or a switch statement.
There are no parameters for break.
The following code searches all .c files for "smurf", and halts at the first occurrence.
\nfor i in *.c if grep smurf $i echo Smurfs are present in $i break end end
Back to command index.
breakpoint
breakpoint is used to halt a running script and launch an interactive debugging prompt.
For more details, see Debugging fish scripts in the fish manual.
There are no parameters for breakpoint.
Back to command index.
builtin BUILTINNAME [OPTIONS...]
builtin forces the shell to use a builtin command, rather than a function or program.
The following parameters are available:
-n or --names List the names of all defined builtinsbuiltin jobs # executes the jobs builtin, even if a function named jobs exists
Back to command index.
switch VALUE; [case [WILDCARD...]; [COMMANDS...]; ...] end
switch performs one of several blocks of commands, depending on whether a specified value equals one of several wildcarded values. case is used together with the switch statement in order to determine which block should be executed.
Each case command is given one or more parameters. The first case command with a parameter that matches the string specified in the switch command will be evaluated. case parameters may contain wildcards. These need to be escaped or quoted in order to avoid regular wildcard expansion using filenames.
Note that fish does not fall through on case statements. Only the first matching case is executed.
Note that command substitutions in a case statement will be evaluated even if its body is not taken. All substitutions, including command substitutions, must be performed before the value can be compared against the parameter.
If the variable $animal contains the name of an animal, the following code would attempt to classify it:
\nswitch $animal case cat echo evil case wolf dog human moose dolphin whale echo mammal case duck goose albatross echo bird case shark trout stingray echo fish # Note that the next case has a wildcard which is quoted case '*' echo I have no idea what a $animal is end
If the above code was run with $animal set to whale, the output would be mammal.
Back to command index.
cd [DIRECTORY]
cd changes the current working directory.
If DIRECTORY is supplied, it will become the new directory. If no parameter is given, the contents of the HOME environment variable will be used.
If DIRECTORY is a relative path, the paths found in the CDPATH environment variable array will be tried as prefixes for the specified path.
Note that the shell will attempt to change directory without requiring cd if the name of a directory is provided (starting with ., / or ~, or ending with /).
Fish also ships a wrapper function around the builtin cd that understands cd - as changing to the previous directory. See also prevd. This wrapper function maintains a history of the 25 most recently visited directories in the $dirprev and $dirnext global variables. If you make those universal variables your cd history is shared among all fish instances.
cd # changes the working directory to your home directory. cd /usr/src/fish-shell # changes the working directory to /usr/src/fish-shell
See also the cdh command for changing to a recently visited directory.
Back to command index.
cdh [ directory ]
cdh with no arguments presents a list of recently visited directories. You can then select one of the entries by letter or number. You can also press tab to use the completion pager to select an item from the list. If you give it a single argument it is equivalent to cd directory.
Note that the cd command limits directory history to the 25 most recently visited directories. The history is stored in the $dirprev and $dirnext variables which this command manipulates. If you make those universal variables your cd history is shared among all fish instances.
See also the prevd and pushd commands which also work with the recent cd history and are provided for compatibility with other shells.
Back to command index.
command [OPTIONS] COMMANDNAME [ARGS...]
command forces the shell to execute the program COMMANDNAME and ignore any functions or builtins with the same name.
The following options are available:
-a or --all returns all the external commands that are found in $PATH in the order they are found.-s or --search returns the name of the external command that would be executed, or nothing if no file with the specified name could be found in the $PATH.With the -s option, command treats every argument as a separate command to look up and sets the exit status to 0 if any of the specified commands were found, or 1 if no commands could be found. Additionally passing a -q or --quiet option prevents any paths from being printed, like the type -q, for testing only the exit status.
For basic compatibility with POSIX command, the -v flag is recognized as an alias for -s.
command ls causes fish to execute the ls program, even if an ls function exists.
command -s ls returns the path to the ls program.
Back to command index.
commandline [OPTIONS] [CMD]
commandline can be used to set or get the current contents of the command line buffer.
With no parameters, commandline returns the current value of the command line.
With CMD specified, the command line buffer is erased and replaced with the contents of CMD.
The following options are available:
-C or --cursor set or get the current cursor position, not the contents of the buffer. If no argument is given, the current cursor position is printed, otherwise the argument is interpreted as the new cursor position.-f or --function inject readline functions into the reader. This option cannot be combined with any other option. It will cause any additional arguments to be interpreted as readline functions, and these functions will be injected into the reader, so that they will be returned to the reader before any additional actual key presses are read.The following options change the way commandline updates the command line buffer:
-a or --append do not remove the current commandline, append the specified string at the end of it-i or --insert do not remove the current commandline, insert the specified string at the current cursor position-r or --replace remove the current commandline and replace it with the specified string (default)The following options change what part of the commandline is printed or updated:
-b or --current-buffer select the entire buffer (default)-j or --current-job select the current job-p or --current-process select the current process-t or --current-token select the current token.The following options change the way commandline prints the current commandline buffer:
-c or --cut-at-cursor only print selection up until the current cursor position-o or --tokenize tokenize the selection and print one string-type token per lineIf commandline is called during a call to complete a given string using complete -C STRING, commandline will consider the specified string to be the current contents of the command line.
The following options output metadata about the commandline state:
-L or --line print the line that the cursor is on, with the topmost line starting at 1-S or --search-mode evaluates to true if the commandline is performing a history search-P or --paging-mode evaluates to true if the commandline is showing pager contents, such as tab completionscommandline -j $history[3] replaces the job under the cursor with the third item from the command line history.
If the commandline contains
\n> echo $flounder >&2 | less; and echo $catfish
(with the cursor on the "o" of "flounder")
Then the following invocations behave like this:
\n> commandline -t $flounder > commandline -ct $fl > commandline -b ## or just commandline echo $flounder >&2 | less; and echo $catfish > commandline -p echo $flounder >&2 > commandline -j echo $flounder >&2 | less
Back to command index.
complete ( -c | --command | -p | --path ) COMMAND [( -c | --command | -p | --path ) COMMAND]... [( -e | --erase )] [( -s | --short-option ) SHORT_OPTION]... [( -l | --long-option | -o | --old-option ) LONG_OPTION]... [( -a | --arguments ) OPTION_ARGUMENTS] [( -f | --no-files )] [( -r | --require-parameter )] [( -x | --exclusive )] [( -w | --wraps ) WRAPPED_COMMAND]... [( -n | --condition ) CONDITION] [( -d | --description ) DESCRIPTION] complete ( -C[STRING] | --do-complete[=STRING] )
For an introduction to specifying completions, see Writing your own completions in the fish manual.
COMMAND is the name of the command for which to add a completion.SHORT_OPTION is a one character option for the command.LONG_OPTION is a multi character option for the command.OPTION_ARGUMENTS is parameter containing a space-separated list of possible option-arguments, which may contain command substitutions.DESCRIPTION is a description of what the option and/or option arguments do.-c COMMAND or --command COMMAND specifies that COMMAND is the name of the command.-p COMMAND or --path COMMAND specifies that COMMAND is the absolute path of the program (optionally containing wildcards).-e or --erase deletes the specified completion.-s SHORT_OPTION or --short-option=SHORT_OPTION adds a short option to the completions list.-l LONG_OPTION or --long-option=LONG_OPTION adds a GNU style long option to the completions list.-o LONG_OPTION or --old-option=LONG_OPTION adds an old style long option to the completions list (See below for details).-a OPTION_ARGUMENTS or --arguments=OPTION_ARGUMENTS adds the specified option arguments to the completions list.-f or --no-files specifies that the options specified by this completion may not be followed by a filename.-r or --require-parameter specifies that the options specified by this completion always must have an option argument, i.e. may not be followed by another option.-x or --exclusive implies both -r and -f.-w WRAPPED_COMMAND or --wraps=WRAPPED_COMMAND causes the specified command to inherit completions from the wrapped command (See below for details).-n or --condition specifies a shell command that must return 0 if the completion is to be used. This makes it possible to specify completions that should only be used in some cases.-CSTRING or --do-complete=STRING makes complete try to find all possible completions for the specified string.-C or --do-complete with no argument makes complete try to find all possible completions for the current command line buffer. If the shell is not in interactive mode, an error is returned.-A and --authoritative no longer do anything and are silently ignored.-u and --unauthoritative no longer do anything and are silently ignored.Command specific tab-completions in fish are based on the notion of options and arguments. An option is a parameter which begins with a hyphen, such as '-h', '-help' or '--help'. Arguments are parameters that do not begin with a hyphen. Fish recognizes three styles of options, the same styles as the GNU version of the getopt library. These styles are:
-a'. Short options are a single character long, are preceded by a single hyphen and may be grouped together (like '-la', which is equivalent to '-l -a'). Option arguments may be specified in the following parameter ('-w 32') or by appending the option with the value ('-w32').-Wall'. Old style long options can be more than one character long, are preceded by a single hyphen and may not be grouped together. Option arguments are specified in the following parameter ('-ao null').--colors'. GNU style long options can be more than one character long, are preceded by two hyphens, and may not be grouped together. Option arguments may be specified in the following parameter ('--quoting-style shell') or by appending the option with a '=' and the value ('--quoting-style=shell'). GNU style long options may be abbreviated so long as the abbreviation is unique ('--h') is equivalent to '--help' if help is the only long option beginning with an 'h').The options for specifying command name and command path may be used multiple times to define the same completions for multiple commands.
The options for specifying command switches and wrapped commands may be used multiple times to define multiple completions for the command(s) in a single call.
Invoking complete multiple times for the same command adds the new definitions on top of any existing completions defined for the command.
When -a or --arguments is specified in conjunction with long, short, or old style options, the specified arguments are only used as completions when attempting to complete an argument for any of the specified options. If -a or --arguments is specified without any long, short, or old style options, the specified arguments are used when completing any argument to the command (except when completing an option argument that was specified with -r or --require-parameter).
Command substitutions found in OPTION_ARGUMENTS are not expected to return a space-separated list of arguments. Instead they must return a newline-separated list of arguments, and each argument may optionally have a tab character followed by the argument description. Any description provided in this way overrides a description given with -d or --description.
The -w or --wraps options causes the specified command to inherit completions from another command. The inheriting command is said to "wrap" the inherited command. The wrapping command may have its own completions in addition to inherited ones. A command may wrap multiple commands, and wrapping is transitive: if A wraps B, and B wraps C, then A automatically inherits all of C's completions. Wrapping can be removed using the -e or --erase options. Note that wrapping only works for completions specified with -c or --command and are ignored when specifying completions with -p or --path.
When erasing completions, it is possible to either erase all completions for a specific command by specifying complete -c COMMAND -e, or by specifying a specific completion option to delete by specifying either a long, short or old style option.
The short style option -o for the gcc command requires that a file follows it. This can be done using writing:
complete -c gcc -s o -r
The short style option -d for the grep command requires that one of the strings 'read', 'skip' or 'recurse' is used. This can be specified writing:
complete -c grep -s d -x -a "read skip recurse"
The su command takes any username as an argument. Usernames are given as the first colon-separated field in the file /etc/passwd. This can be specified as:
complete -x -c su -d "Username" -a "(cat /etc/passwd | cut -d : -f 1)"
The rpm command has several different modes. If the -e or --erase flag has been specified, rpm should delete one or more packages, in which case several switches related to deleting packages are valid, like the nodeps switch.
This can be written as:
\ncomplete -c rpm -n "__fish_contains_opt -s e erase" -d nodeps "Don't check dependencies"
where __fish_contains_opt is a function that checks the command line buffer for the presence of a specified set of options.
To implement an alias, use the -w or --wraps option:
complete -c hub -w git
Now hub inherits all of the completions from git. Note this can also be specified in a function declaration.
Back to command index.
contains [OPTIONS] KEY [VALUES...]
contains tests whether the set VALUES contains the string KEY. If so, contains exits with status 0; if not, it exits with status 1.
The following options are available:
-i or --index print the word indexNote that, like GNU tools, contains interprets all arguments starting with a - as options to contains, until it reaches an argument that is -- (two dashes). See the examples below.
for i in ~/bin /usr/local/bin if not contains $i $PATH set PATH $PATH $i end end
The above code tests if ~/bin and /usr/local/bin are in the path and adds them if not.
function hasargs if contains -- -q $argv echo '$argv contains a -q option' end end
The above code checks for -q in the argument list, using the -- argument to demarcate options to contains from the key to search for.
Back to command index.
LOOP_CONSTRUCT; [COMMANDS...;] continue; [COMMANDS...;] end
continue skips the remainder of the current iteration of the current inner loop, such as a for loop or a while loop. It is usually added inside of a conditional block such as an if statement or a switch statement.
The following code removes all tmp files that do not contain the word smurf.
\nfor i in *.tmp if grep smurf $i continue end rm $i end
Back to command index.
count $VARIABLE
count prints the number of arguments that were passed to it. This is usually used to find out how many elements an environment variable array contains.
count does not accept any options, including -h or --help.
count exits with a non-zero exit status if no arguments were passed to it, and with zero if at least one argument was passed.
count $PATH # Returns the number of directories in the users PATH variable. count *.txt # Returns the number of files in the current working directory ending with the suffix '.txt'.
Back to command index.
dirh
dirh prints the current directory history. The current position in the history is highlighted using the color defined in the fish_color_history_current environment variable.
dirh does not accept any parameters.
Note that the cd command limits directory history to the 25 most recently visited directories. The history is stored in the $dirprev and $dirnext variables.
Back to command index.
dirs dirs -c
dirs prints the current directory stack, as created by the pushd command.
With "-c", it clears the directory stack instead.
dirs does not accept any parameters.
Back to command index.
disown [ PID ... ]
disown removes the specified job from the list of jobs. The job itself continues to exist, but fish does not keep track of it any longer.
Jobs in the list of jobs are sent a hang-up signal when fish terminates, which usually causes the job to terminate; disown allows these processes to continue regardless.
If no process is specified, the most recently-used job is removed (like bg and fg). If one or more PIDs are specified, jobs with the specified process IDs are removed from the job list. Invalid jobs are ignored and a warning is printed.
If a job is stopped, it is sent a signal to continue running, and a warning is printed. It is not possible to use the bg builtin to continue a job once it has been disowned.
The PID of the desired process is usually found by using process expansion, which can specify jobs or search by process name.
disown returns 0 if all specified jobs were disowned successfully, and 1 if any problems were encountered.
firefox &; disown will start the Firefox web browser in the background and remove it from the job list, meaning it will not be closed when the fish process is closed.
disown (jobs -p) removes all jobs from the job list without terminating them.
Back to command index.
echo [OPTIONS] [STRING]
echo displays a string of text.
The following options are available:
-n, Do not output a newline-s, Do not separate arguments with spaces-E, Disable interpretation of backslash escapes (default)-e, Enable interpretation of backslash escapesIf -e is used, the following sequences are recognized:
\ backslash\a alert (BEL)\b backspace\c produce no further output\e escape\f form feed\n new line\r carriage return\t horizontal tab\v vertical tab\0NNN byte with octal value NNN (1 to 3 digits)\xHH byte with hexadecimal value HH (1 to 2 digits)echo 'Hello World'
Print hello world to stdout
echo -e 'Top\nBottom'
Print Top and Bottom on separate lines, using an escape sequence
Back to command index.
if CONDITION; COMMANDS_TRUE...; [else; COMMANDS_FALSE...;] end
if will execute the command CONDITION. If the condition's exit status is 0, the commands COMMANDS_TRUE will execute. If it is not 0 and else is given, COMMANDS_FALSE will be executed.
The following code tests whether a file foo.txt exists as a regular file.
if test -f foo.txt echo foo.txt exists else echo foo.txt does not exist end
Back to command index.
emit EVENT_NAME [ARGUMENTS...]
emit emits, or fires, an event. Events are delivered to, or caught by, special functions called event handlers. The arguments are passed to the event handlers as function arguments.
The following code first defines an event handler for the generic event named 'test_event', and then emits an event of that type.
\nfunction event_test --on-event test_event echo event test: $argv end emit test_event something \subsection emit-notes Notes Note that events are only sent to the current fish process as there is no way to send events from one fish process to another.
Back to command index.
begin; [COMMANDS...] end if CONDITION; COMMANDS_TRUE...; [else; COMMANDS_FALSE...;] end while CONDITION; COMMANDS...; end for VARNAME in [VALUES...]; COMMANDS...; end switch VALUE; [case [WILDCARD...]; [COMMANDS...]; ...] end
end ends a block of commands.
For more information, read the documentation for the block constructs, such as if, for and while.
The end command does not change the current exit status. Instead, the status after it will be the status returned by the most recent command.
Back to command index.
eval [COMMANDS...]
eval evaluates the specified parameters as a command. If more than one parameter is specified, all parameters will be joined using a space character as a separator.
The following code will call the ls command. Note that fish does not support the use of shell variables as direct commands; eval can be used to work around this.
set cmd ls eval $cmd
Back to command index.
exec COMMAND [OPTIONS...]
exec replaces the currently running shell with a new command. On successful completion, exec never returns. exec cannot be used inside a pipeline.
exec emacs starts up the emacs text editor, and exits fish. When emacs exits, the session will terminate.
Back to command index.
exit [STATUS]
exit causes fish to exit. If STATUS is supplied, it will be converted to an integer and used as the exit code. Otherwise, the exit code will be that of the last command executed.
If exit is called while sourcing a file (using the source builtin) the rest of the file will be skipped, but the shell itself will not exit.
Back to command index.
false
false sets the exit status to 1.
Back to command index.
fg [PID]
fg brings the specified job to the foreground, resuming it if it is stopped. While a foreground job is executed, fish is suspended. If no job is specified, the last job to be used is put in the foreground. If PID is specified, the job with the specified group ID is put in the foreground.
The PID of the desired process is usually found by using process expansion. Fish is capable of expanding far more than just the numeric PID, including referencing itself and finding PIDs by name.
fg %1 will put the job with job ID 1 in the foreground.
Back to command index.
fish [OPTIONS] [-c command] [FILE [ARGUMENTS...]]
fish is a command-line shell written mainly with interactive use in mind. The full manual is available in HTML by using the help command from inside fish.
The following options are available:
-c or --command=COMMANDS evaluate the specified commands instead of reading from the commandline-C or --init-command=COMMANDS evaluate the specified commands after reading the configuration, before running the command specified by -c or reading interactive input-d or --debug-level=DEBUG_LEVEL specify the verbosity level of fish. A higher number means higher verbosity. The default level is 1.-i or --interactive specify that fish is to run in interactive mode-l or --login specify that fish is to run as a login shell-n or --no-execute do not execute any commands, only perform syntax checking-p or --profile=PROFILE_FILE when fish exits, output timing information on all executed commands to the specified file-v or --version display version and exit-D or --debug-stack-frames=DEBUG_LEVEL specify how many stack frames to display when debug messages are written. The default is zero. A value of 3 or 4 is usually sufficient to gain insight into how a given debug call was reached but you can specify a value up to 128.The fish exit status is generally the exit status of the last foreground command. If fish is exiting because of a parse error, the exit status is 127.
Back to command index.
function fish_breakpoint_prompt ... end
By defining the fish_breakpoint_prompt function, the user can choose a custom prompt when asking for input in response to a breakpoint command. The fish_breakpoint_prompt function is executed when the prompt is to be shown, and the output is used as a prompt.
The exit status of commands within fish_breakpoint_prompt will not modify the value of $status outside of the fish_breakpoint_prompt function.
fish ships with a default version of this function that displays the function name and line number of the current execution context.
A simple prompt that is a simplified version of the default debugging prompt:
\nfunction fish_breakpoint_prompt -d "Write out the debug prompt" set -l function (status current-function) set -l line (status current-line-number) set -l prompt "$function:$line >" echo -ns (set_color $fish_color_status) \ (set_color normal) end
Back to command index.
fish_config starts the web-based configuration interface.
The web interface allows you to view your functions, variables and history, and to make changes to your prompt and color configuration.
fish_config starts a local web server and then opens a web browser window; when you have finished, close the browser window and then press the Enter key to terminate the configuration session.
fish_config optionally accepts name of the initial configuration tab. For e.g. fish_config history will start configuration interface with history tab.
If the BROWSER environment variable is set, it will be used as the name of the web browser to open instead of the system default.
fish_config opens a new web browser window and allows you to configure certain fish settings.
Back to command index.
fish_indent [OPTIONS]
fish_indent is used to indent a piece of fish code. fish_indent reads commands from standard input and outputs them to standard output or a specified file.
The following options are available:
-w or --write indents a specified file and immediately writes to that file.-i or --no-indent do not indent commands; only reformat to one job per line.-v or --version displays the current fish version and then exits.--ansi colorizes the output using ANSI escape sequences, appropriate for the current $TERM, using the colors defined in the environment (such as $fish_color_command).--html outputs HTML, which supports syntax highlighting if the appropriate CSS is defined. The CSS class names are the same as the variable names, such as fish_color_command.-d or --debug-level=DEBUG_LEVEL enables debug output and specifies a verbosity level (like fish -d). Defaults to 0.-D or --debug-stack-frames=DEBUG_LEVEL specify how many stack frames to display when debug messages are written. The default is zero. A value of 3 or 4 is usually sufficient to gain insight into how a given debug call was reached but you can specify a value up to 128.--dump-parse-tree dumps information about the parsed statements to stderr. This is likely to be of interest only to people working on the fish source code.Back to command index.
fish_key_reader [OPTIONS]
fish_key_reader is used to study input received from the terminal and can help with key binds. The program is interactive and works on standard input. Individual characters themselves and their hexadecimal values are displayed.
The tool will write an example bind command matching the character sequence captured to stdout. If the character sequence matches a special key name (see bind --key-names), both bind CHARS ... and bind -k KEYNAME ... usage will be shown. Additional details about the characters received, such as the delay between chars, are written to stderr.
The following options are available:
-c or --continuous begins a session where multiple key sequences can be inspected. By default the program exits after capturing a single key sequence.-d or --debug-level=DEBUG_LEVEL enables debug output and specifies a verbosity level (like fish -d). Defaults to 0.-D or --debug-stack-frames=DEBUG_LEVEL specify how many stack frames to display when debug messages are written. The default is zero. A value of 3 or 4 is usually sufficient to gain insight into how a given debug call was reached but you can specify a value up to 128.-h or --help prints usage information.-v or --version prints fish_key_reader's version and exits.The delay in milliseconds since the previous character was received is included in the diagnostic information written to stderr. This information may be useful to determine the optimal fish_escape_delay_ms setting or learn the amount of lag introduced by tools like ssh, mosh or tmux.
fish_key_reader intentionally disables handling of many signals. To terminate fish_key_reader in --continuous mode do:
Ctrl-C twice, orCtrl-D twice, orexit, orquitBack to command index.
The fish_mode_prompt function will output the mode indicator for use in vi-mode.
The default fish_mode_prompt function will output indicators about the current Vi editor mode displayed to the left of the regular prompt. Define your own function to customize the appearance of the mode indicator. You can also define an empty fish_mode_prompt function to remove the Vi mode indicators. The $fish_bind_mode variable can be used to determine the current mode. It will be one of default, insert, replace_one, or visual.
function fish_mode_prompt switch $fish_bind_mode case default set_color --bold red echo 'N' case insert set_color --bold green echo 'I' case replace_one set_color --bold green echo 'R' case visual set_color --bold brmagenta echo 'V' case '*' set_color --bold red echo '?' end set_color normal end
Outputting multiple lines is not supported in fish_mode_prompt.
Back to command index.
fish_opt [ -h | --help ] fish_opt ( -s X | --short=X ) [ -l LONG | --long=LONG ] [ --long-only ] \ [ -o | --optional-val ] [ -r | --required-val ] [ --multiple-vals ]
This command provides a way to produce option specifications suitable for use with the argparse command. You can, of course, write the option specs by hand without using this command. But you might prefer to use this for the clarity it provides.
The following argparse options are available:
-s or --short takes a single letter that is used as the short flag in the option being defined. This option is mandatory.-l or --long takes a string that is used as the long flag in the option being defined. This option is optional and has no default. If no long flag is defined then only the short flag will be allowed when parsing arguments using the option spec.--long-only means the option spec being defined will only allow the long flag name to be used. The short flag name must still be defined (i.e., --short must be specified) but it cannot be used when parsing args using this option spec.-o or --optional means the option being defined can take a value but it is optional rather than required. If the option is seen more than once when parsing arguments only the last value seen is saved. This means the resulting flag variable created by argparse will zero elements if no value was given with the option else it will have exactly one element.-r or --required means the option being defined requires a value. If the option is seen more than once when parsing arguments only the last value seen is saved. This means the resulting flag variable created by argparse will have exactly one element.--multiple-vals means the option being defined requires a value each time it is seen. Each instance is stored. This means the resulting flag variable created by argparse will have one element for each instance of this option in the args.-h or --help displays help about using this command.Define a single option spec for the boolean help flag:
\nset -l options (fish_opt -s h -l help) argparse $options -- $argv
Same as above but with a second flag that requires a value:
set -l options (fish_opt -s h -l help) set options $options (fish_opt -s m -l max --required-val) argparse $options -- $argv
Same as above but with a third flag that can be given multiple times saving the value of each instance seen and only the long flag name (--token) can be used:
set -l options (fish_opt --short=h --long=help) set options $options (fish_opt --short=m --long=max --required-val) set options $options (fish_opt --short=t --long=token --multiple-vals --long-only) argparse $options -- $argv
Back to command index.
function fish_prompt ... end
By defining the fish_prompt function, the user can choose a custom prompt. The fish_prompt function is executed when the prompt is to be shown, and the output is used as a prompt.
The exit status of commands within fish_prompt will not modify the value of $status outside of the fish_prompt function.
fish ships with a number of example prompts that can be chosen with the fish_config command.
A simple prompt:
\nfunction fish_prompt -d "Write out the prompt" printf '%s@%s%s%s%s> ' (whoami) (hostname | cut -d . -f 1) \ (set_color $fish_color_cwd) (prompt_pwd) (set_color normal) end
Back to command index.
function fish_right_prompt ... end
fish_right_prompt is similar to fish_prompt, except that it appears on the right side of the terminal window.
Multiple lines are not supported in fish_right_prompt.
A simple right prompt:
\nfunction fish_right_prompt -d "Write out the right prompt" date '+%m/%d/%y' end
Back to command index.
fish_update_completions parses manual pages installed on the system, and attempts to create completion files in the fish configuration directory.
This does not overwrite custom completions.
There are no parameters for fish_update_completions.
Back to command index.
fish_vi_mode
This function is deprecated. Please call fish_vi_key_bindings directly
fish_vi_mode enters a vi-like command editing mode. To always start in vi mode, add fish_vi_mode to your config.fish file.
Back to command index.
for VARNAME in [VALUES...]; COMMANDS...; end
for is a loop construct. It will perform the commands specified by COMMANDS multiple times. On each iteration, the local variable specified by VARNAME is assigned a new value from VALUES. If VALUES is empty, COMMANDS will not be executed at all.
for i in foo bar baz; echo $i; end # would output: foo bar baz
Back to command index.
funced [OPTIONS] NAME
funced provides an interface to edit the definition of the function NAME.
If the $VISUAL environment variable is set, it will be used as the program to edit the function. If $VISUAL is unset but $EDITOR is set, that will be used. Otherwise, a built-in editor will be used. Note that to enter a literal newline using the built-in editor you should press Alt-Enter. Pressing Enter signals that you are done editing the function. This does not apply to an external editor like emacs or vim.
If there is no function called NAME a new function will be created with the specified name
-e command or --editor command Open the function body inside the text editor given by the command (for example, -e vi). The special command fish will use the built-in editor (same as specifying -i).-i or --interactive Force opening the function body in the built-in editor even if $VISUAL or $EDITOR is defined.Back to command index.
funcsave FUNCTION_NAME
funcsave saves the current definition of a function to a file in the fish configuration directory. This function will be automatically loaded by current and future fish sessions. This can be useful if you have interactively created a new function and wish to save it for later use.
Note that because fish loads functions on-demand, saved functions will not function as event handlers until they are run or sourced otherwise. To activate an event handler for every new shell, add the function to your shell initialization file instead of using funcsave.
Back to command index.
function NAME [OPTIONS]; BODY; end
function creates a new function NAME with the body BODY.
A function is a list of commands that will be executed when the name of the function is given as a command.
The following options are available:
-a NAMES or --argument-names NAMES assigns the value of successive command-line arguments to the names given in NAMES.-d DESCRIPTION or --description=DESCRIPTION is a description of what the function does, suitable as a completion description.-w WRAPPED_COMMAND or --wraps=WRAPPED_COMMAND causes the function to inherit completions from the given wrapped command. See the documentation for complete for more information.-e or --on-event EVENT_NAME tells fish to run this function when the specified named event is emitted. Fish internally generates named events e.g. when showing the prompt.-v or --on-variable VARIABLE_NAME tells fish to run this function when the variable VARIABLE_NAME changes value.-j PGID or --on-job-exit PGID tells fish to run this function when the job with group ID PGID exits. Instead of PGID, the string 'caller' can be specified. This is only legal when in a command substitution, and will result in the handler being triggered by the exit of the job which created this command substitution.-p PID or --on-process-exit PID tells fish to run this function when the fish child process with process ID PID exits.-s or --on-signal SIGSPEC tells fish to run this function when the signal SIGSPEC is delivered. SIGSPEC can be a signal number, or the signal name, such as SIGHUP (or just HUP).-S or --no-scope-shadowing allows the function to access the variables of calling functions. Normally, any variables inside the function that have the same name as variables from the calling function are "shadowed", and their contents is independent of the calling function.-V or --inherit-variable NAME snapshots the value of the variable NAME and defines a local variable with that same name and value when the function is defined. This is similar to a closure in other languages like Python but a bit different. Note the word "snapshot" in the first sentence. If you change the value of the variable after defining the function, even if you do so in the same scope (typically another function) the new value will not be used by the function you just created using this option. See the function notify example below for how this might be used.If the user enters any additional arguments after the function, they are inserted into the environment variable array $argv. If the --argument-names option is provided, the arguments are also assigned to names specified in that option.
By using one of the event handler switches, a function can be made to run automatically at specific events. The user may generate new events using the emit builtin. Fish generates the following named events:
fish_prompt, which is emitted whenever a new fish prompt is about to be displayed.fish_command_not_found, which is emitted whenever a command lookup failed.fish_preexec, which is emitted right before executing an interactive command. The commandline is passed as the first parameter.
Note: This event will be emitted even if the command is invalid. The commandline parameter includes the entire commandline verbatim, and may potentially include newlines.
fish_postexec, which is emitted right after executing an interactive command. The commandline is passed as the first parameter.
Note: This event will be emitted even if the command is invalid. The commandline parameter includes the entire commandline verbatim, and may potentially include newlines.
function ll ls -l $argv end
will run the ls command, using the -l option, while passing on any additional files and switches to ls.
function mkdir -d "Create a directory and set CWD" command mkdir $argv if test $status = 0 switch $argv[(count $argv)] case '-*' case '*' cd $argv[(count $argv)] return end end end
This will run the mkdir command, and if it is successful, change the current working directory to the one just created.
function notify set -l job (jobs -l -g) or begin; echo "There are no jobs" >&2; return 1; end function _notify_job_$job --on-job-exit $job --inherit-variable job echo -n \a ## beep functions -e _notify_job_$job end end
This will beep when the most recent job completes.
Note that events are only received from the current fish process as there is no way to send events from one fish process to another.
Back to command index.
functions [ -a | --all ] [ -n | --names ] functions [ -D | --details ] [ -v ] FUNCTION functions -c OLDNAME NEWNAME functions -d DESCRIPTION FUNCTION functions [ -e | -q ] FUNCTIONS...
functions prints or erases functions.
The following options are available:
-a or --all lists all functions, even those whose name starts with an underscore.-c OLDNAME NEWNAME or --copy OLDNAME NEWNAME creates a new function named NEWNAME, using the definition of the OLDNAME function.-d DESCRIPTION or --description=DESCRIPTION changes the description of this function.-e or --erase causes the specified functions to be erased.-D or --details reports the path name where each function is defined or could be autoloaded, stdin if the function was defined interactively or on the command line or by reading stdin, and n/a if the function isn't available. If the --verbose option is also specified then five lines are written:autoloaded, not-autoloaded or n/a,scope-shadowing if the function shadows the vars in the calling function (the normal case if it wasn't defined with --no-scope-shadowing), else no-scope-shadowing, or n/a if the function isn't defined,n/a if the function isn't defined.You should not assume that only five lines will be written since we may add additional information to the output in the future.
-n or --names lists the names of all defined functions.-q or --query tests if the specified functions exist.-v or --verbose will make some output more verbose.The default behavior of functions, when called with no arguments, is to print the names of all defined functions. Unless the -a option is given, no functions starting with underscores are not included in the output.
If any non-option parameters are given, the definition of the specified functions are printed.
Automatically loaded functions cannot be removed using functions -e. Either remove the definition file or change the $fish_function_path variable to remove autoloaded functions.
Copying a function using -c copies only the body of the function, and does not attach any event notifications from the original function.
Only one function's description can be changed in a single invocation of functions -d.
The exit status of functions is the number of functions specified in the argument list that do not exist, which can be used in concert with the -q option.
functions -n # Displays a list of currently-defined functions functions -c foo bar # Copies the 'foo' function to a new function called 'bar' functions -e bar # Erases the function `bar`
Back to command index.
help [SECTION]
help displays the fish help documentation.
If a SECTION is specified, the help for that command is shown.
If the BROWSER environment variable is set, it will be used to display the documentation. Otherwise, fish will search for a suitable browser.
If you prefer to use a different browser (other than as described above) for fish help, you can set the fish_help_browser variable. This variable may be set as an array, where the first element is the browser command and the rest are browser options.
Note that most builtin commands display their help in the terminal when given the --help option.
help fg shows the documentation for the fg builtin.
Back to command index.
history search [ --show-time ] [ --case-sensitive ] [ --exact | --prefix | --contains ] [ --max=n ] [ --null ] [ "search string"... ] history delete [ --show-time ] [ --case-sensitive ] [ --exact | --prefix | --contains ] "search string"... history merge history save history clear history ( -h | --help )
history is used to search, delete, and otherwise manipulate the history of interactive commands.
The following operations (sub-commands) are available:
search returns history items matching the search string. If no search string is provided it returns all history items. This is the default operation if no other operation is specified. You only have to explicitly say history search if you wish to search for one of the subcommands. The --contains search option will be used if you don't specify a different search option. Entries are ordered newest to oldest. If stdout is attached to a tty the output will be piped through your pager by the history function. The history builtin simply writes the results to stdout.delete deletes history items. Without the --prefix or --contains options, the exact match of the specified text will be deleted. If you don't specify --exact a prompt will be displayed before any items are deleted asking you which entries are to be deleted. You can enter the word "all" to delete all matching entries. You can enter a single ID (the number in square brackets) to delete just that single entry. You can enter more than one ID separated by a space to delete multiple entries. Just press [enter] to not delete anything. Note that the interactive delete behavior is a feature of the history function. The history builtin only supports --exact --case-sensitive deletion.merge immediately incorporates history changes from other sessions. Ordinarily fish ignores history changes from sessions started after the current one. This command applies those changes immediately.save immediately writes all changes to the history file. The shell automatically saves the history file; this option is provided for internal use and should not normally need to be used by the user.clear clears the history file. A prompt is displayed before the history is erased asking you to confirm you really want to clear all history unless builtin history is used.The following options are available:
These flags can appear before or immediately after one of the sub-commands listed above.
-C or --case-sensitive does a case-sensitive search. The default is case-insensitive. Note that prior to fish 2.4.0 the default was case-sensitive.-c or --contains searches or deletes items in the history that contain the specified text string. This is the default for the --search flag. This is not currently supported by the --delete flag.-e or --exact searches or deletes items in the history that exactly match the specified text string. This is the default for the --delete flag. Note that the match is case-insensitive by default. If you really want an exact match, including letter case, you must use the -C or --case-sensitive flag.-p or --prefix searches or deletes items in the history that begin with the specified text string. This is not currently supported by the --delete flag.-t or --show-time prepends each history entry with the date and time the entry was recorded . By default it uses the strftime format # cn. You can specify another format; e.g., ‘--show-time=’Y-m-d H:M:S 'or–show-time='aIp'. The short option,-tdoesn't accept a stftime format string; it only uses the default format. Any strftime format is allowed, includingsto get the raw UNIX seconds since the epoch. Note that–with-time` is also allowed but is deprecated and will be removed at a future date.-z or --null causes history entries written by the search operations to be terminated by a NUL character rather than a newline. This allows the output to be processed by read -z to correctly handle multiline history entries.-<number> -n <number> or --max=<number> limits the matched history items to the first "n" matching entries. This is only valid for history search.-h or --help display help for this command.history clear # Deletes all history items history search --contains "foo" # Outputs a list of all previous commands containing the string "foo". history delete --prefix "foo" # Interactively deletes commands which start with "foo" from the history. # You can select more than one entry by entering their IDs seperated by a space.
By default interactive commands are logged to $XDG_DATA_HOME/fish/fish_history (typically ~/.local/share/fish/fish_history).
You can set the fish_history variable to another name for the current shell session. The default value (when the variable is unset) is fish which corresponds to $XDG_DATA_HOME/fish/fish_history. If you set it to e.g. fun, the history would be written to $XDG_DATA_HOME/fish/fun_history. An empty string means history will not be stored at all. This is similar to the private session features in web browsers.
You can change fish_history at any time (by using set -x fish_history "session_name") and it will take effect right away. If you set it to "default", it will use the default session name (which is "fish").
Other shells such as bash and zsh use a variable named HISTFILE for a similar purpose. Fish uses a different name to avoid conflicts and signal that the behavior is different (session name instead of a file path). Also, if you set the var to anything other than fish or default it will inhibit importing the bash history. That's because the most common use case for this feature is to avoid leaking private or sensitive history when giving a presentation.
If you specify both --prefix and --contains the last flag seen is used.
Note that for backwards compatibility each subcommand can also be specified as a long option. For example, rather than history search you can type history --search. Those long options are deprecated and will be removed in a future release.
Back to command index.
if CONDITION; COMMANDS_TRUE...; [else if CONDITION2; COMMANDS_TRUE2...;] [else; COMMANDS_FALSE...;] end
if will execute the command CONDITION. If the condition's exit status is 0, the commands COMMANDS_TRUE will execute. If the exit status is not 0 and else is given, COMMANDS_FALSE will be executed.
You can use and or or in the condition. See the second example below.
The exit status of the last foreground command to exit can always be accessed using the $status variable.
The following code will print foo.txt exists if the file foo.txt exists and is a regular file, otherwise it will print bar.txt exists if the file bar.txt exists and is a regular file, otherwise it will print foo.txt and bar.txt do not exist.
if test -f foo.txt echo foo.txt exists else if test -f bar.txt echo bar.txt exists else echo foo.txt and bar.txt do not exist end
The following code will print "foo.txt exists and is readable" if foo.txt is a regular file and readable
if test -f foo.txt and test -r foo.txt echo "foo.txt exists and is readable" end
Back to command index.
isatty [FILE DESCRIPTOR]
isatty tests if a file descriptor is a tty.
FILE DESCRIPTOR may be either the number of a file descriptor, or one of the strings stdin, stdout, or stderr.
If the specified file descriptor is a tty, the exit status of the command is zero. Otherwise, the exit status is non-zero. No messages are printed to standard error.
From an interactive shell, the commands below exit with a return value of zero:
\nisatty isatty stdout isatty 2 echo | isatty 1
And these will exit non-zero:
echo | isatty isatty 9 isatty stdout > file isatty 2 2> file
Back to command index.
jobs [OPTIONS] [PID]
jobs prints a list of the currently running jobs and their status.
jobs accepts the following switches:
-c or --command prints the command name for each process in jobs.-g or --group only prints the group ID of each job.-l or --last prints only the last job to be started.-p or --pid prints the process ID for each process in all jobs.On systems that supports this feature, jobs will print the CPU usage of each job since the last command was executed. The CPU usage is expressed as a percentage of full CPU activity. Note that on multiprocessor systems, the total activity may be more than 100%.
jobs outputs a summary of the current jobs.
Back to command index.
math [-sN | --scale=N] [--] EXPRESSION
math is used to perform mathematical calculations. It is a very thin wrapper for the bc program, which makes it possible to specify an expression from the command line without using non-standard extensions or a pipeline.
For a description of the syntax supported by math, see the manual for the bc program. Keep in mind that parameter expansion takes place on any expressions before they are evaluated. This can be very useful in order to perform calculations involving shell variables or the output of command substitutions, but it also means that parenthesis have to be escaped.
The following options are available:
-sN or --scale=N sets the scale of the result. N must be an integer and defaults to zero. This simply sets bc's scale variable to the provided value.If invalid options or no expression is provided the return status is two. If the expression is invalid the return status is three. If bc returns a result of 0 (literally, not 0.0 or similar variants) the return status is one otherwise it's zero.
math 1+1 outputs 2.
math $status-128 outputs the numerical exit status of the last command minus 128.
math 10 / 6 outputs 1.
math -s0 10.0 / 6.0 outputs 1.
math -s3 10 / 6 outputs 1.666.
You should always place a -- flag separator before the expression. 99.99% of the time you'll get the desired result without the separator. Something like math -10.0 / 2 will fail because the negative floating point value gets treated as an invalid flag. But math -10 / 2 will work because negative integers are special-cased.
Note that the modulo operator (x % y) is not well defined for floating point arithmetic. The bc command produces a nonsensical result rather than emit an error and fail in that case. It doesn't matter if the arguments are integers; e.g., 10 % 4. You'll still get an incorrect result. Do not use the -sN flag with N greater than zero if you want sensible answers when using the modulo operator.
Back to command index.
nextd [ -l | --list ] [POS]
nextd moves forwards POS positions in the history of visited directories; if the end of the history has been hit, a warning is printed.
If the -l or --list flag is specified, the current directory history is also displayed.
Note that the cd command limits directory history to the 25 most recently visited directories. The history is stored in the $dirprev and $dirnext variables which this command manipulates.
You may be interested in the cdh command which provides a more intuitive way to navigate to recently visited directories.
cd /usr/src # Working directory is now /usr/src cd /usr/src/fish-shell # Working directory is now /usr/src/fish-shell prevd # Working directory is now /usr/src nextd # Working directory is now /usr/src/fish-shell
Back to command index.
not COMMAND [OPTIONS...]
not negates the exit status of another command. If the exit status is zero, not returns 1. Otherwise, not returns 0.
The following code reports an error and exits if no file named spoon can be found.
\nif not test -f spoon echo There is no spoon exit 1 end
Back to command index.
open FILES...
open opens a file in its default application, using the appropriate tool for the operating system. On GNU/Linux, this requires the common but optional xdg-open utility, from the xdg-utils package.
Note that this function will not be used if a command by this name exists (which is the case on macOS or Haiku).
open *.txt opens all the text files in the current directory using your system's default text editor.
Back to command index.
COMMAND1; or COMMAND2
or is used to execute a command if the current exit status (as set by the previous command) is not 0.
or statements may be used as part of the condition in an and or while block. See the documentation for if and while for examples.
or does not change the current exit status itself, but the command it runs most likely will. The exit status of the last foreground command to exit can always be accessed using the $status variable.
The following code runs the make command to build a program. If the build succeeds, the program is installed. If either step fails, make clean is run, which removes the files created by the build process.
make; and make install; or make clean
Back to command index.
popd
popd removes the top directory from the directory stack and changes the working directory to the new top directory. Use pushd to add directories to the stack.
You may be interested in the cdh command which provides a more intuitive way to navigate to recently visited directories.
pushd /usr/src # Working directory is now /usr/src # Directory stack contains /usr/src pushd /usr/src/fish-shell # Working directory is now /usr/src/fish-shell # Directory stack contains /usr/src /usr/src/fish-shell popd # Working directory is now /usr/src # Directory stack contains /usr/src
Back to command index.
prevd [ -l | --list ] [POS]
prevd moves backwards POS positions in the history of visited directories; if the beginning of the history has been hit, a warning is printed.
If the -l or --list flag is specified, the current history is also displayed.
Note that the cd command limits directory history to the 25 most recently visited directories. The history is stored in the $dirprev and $dirnext variables which this command manipulates.
You may be interested in the cdh command which provides a more intuitive way to navigate to recently visited directories.
cd /usr/src # Working directory is now /usr/src cd /usr/src/fish-shell # Working directory is now /usr/src/fish-shell prevd # Working directory is now /usr/src nextd # Working directory is now /usr/src/fish-shell
Back to command index.
printf format [argument...]
printf formats the string FORMAT with ARGUMENT, and displays the result.
The string FORMAT should contain format specifiers, each of which are replaced with successive arguments according to the specifier. Specifiers are detailed below, and are taken from the C library function printf(3).
Unlike echo, printf does not append a new line unless it is specified as part of the string.
Valid format specifiers are:
%d: Argument will be used as decimal integer (signed or unsigned)%i: Argument will be used as a signed integer%o: An octal unsigned integer%u: An unsigned decimal integer%x or %X: An unsigned hexadecimal integer%f, %g or %G: A floating-point number%e or %E: A floating-point number in scientific (XXXeYY) notation%s: A string%b: As a string, interpreting backslash escapes, except that octal escapes are of the form \0 or \0ooo.%% signifies a literal "%".
Note that conversion may fail, e.g. "102.234" will not losslessly convert to an integer, causing printf to print an error.
printf also knows a number of backslash escapes:
\" double quote\\ backslash\a alert (bell)\b backspace\c produce no further output\e escape\f form feed\n new line\r carriage return\t horizontal tab\v vertical tab\ooo octal number (ooo is 1 to 3 digits)\xhh hexadecimal number (hhh is 1 to 2 digits)\uhhhh 16-bit Unicode character (hhhh is 4 digits)\Uhhhhhhhh 32-bit Unicode character (hhhhhhhh is 8 digits)The format argument is re-used as many times as necessary to convert all of the given arguments. If a format specifier is not appropriate for the given argument, an error is printed. For example, ‘printf ’d' "102.234"` produces an error, as "102.234" cannot be formatted as an integer.
This file has been imported from the printf in GNU Coreutils version 6.9. If you would like to use a newer version of printf, for example the one shipped with your OS, try command printf.
printf '%s\t%s\n' flounder fish
Will print "flounder fish" (separated with a tab character), followed by a newline character. This is useful for writing completions, as fish expects completion scripts to output the option followed by the description, separated with a tab character.
printf '%s:%d' "Number of bananas in my pocket" 42
Will print "Number of bananas in my pocket: 42", without a newline.
Back to command index.
prompt_pwd
prompt_pwd is a function to print the current working directory in a way suitable for prompts. It will replace the home directory with "~" and shorten every path component but the last to a default of one character.
To change the number of characters per path component, set $fish_prompt_pwd_dir_length to the number of characters. Setting it to 0 or an invalid value will disable shortening entirely.
> cd ~/ > echo $PWD /home/alfa > prompt_pwd ~ > cd /tmp/banana/sausage/with/mustard > prompt_pwd /t/b/s/w/mustard > set -g fish_prompt_pwd_dir_length 3 > prompt_pwd /tmp/ban/sau/wit/mustard
Back to command index.
COMMAND1 ( COMMAND2 | psub [-F | --fifo] [-f | --file] [-s SUFFIX])
Some shells (e.g., ksh, bash) feature a syntax that is a mix between command substitution and piping, called process substitution. It is used to send the output of a command into the calling command, much like command substitution, but with the difference that the output is not sent through commandline arguments but through a named pipe, with the filename of the named pipe sent as an argument to the calling program. psub combined with a regular command substitution provides the same functionality.
The following options are available:
-f or --file will cause psub to use a regular file instead of a named pipe to communicate with the calling process. This will cause psub to be significantly slower when large amounts of data are involved, but has the advantage that the reading process can seek in the stream. This is the default.-F or --fifo will cause psub to use a named pipe rather than a file. You should only use this if the command produces no more than 8 KiB of output. The limit on the amount of data a FIFO can buffer varies with the OS but is typically 8 KiB, 16 KiB or 64 KiB. If you use this option and the command on the left of the psub pipeline produces more output a deadlock is likely to occur.-s or --suffix will append SUFFIX to the filename.diff (sort a.txt | psub) (sort b.txt | psub) # shows the difference between the sorted versions of files `a.txt` and `b.txt`. source-highlight -f esc (cpp main.c | psub -f -s .c) # highlights `main.c` after preprocessing as a C source.
Back to command index.
pushd [DIRECTORY]
The pushd function adds DIRECTORY to the top of the directory stack and makes it the current working directory. popd will pop it off and return to the original directory.
Without arguments, it exchanges the top two directories in the stack.
pushd +NUMBER rotates the stack counter-clockwise i.e. from bottom to top
pushd -NUMBER rotates clockwise i.e. top to bottom.
See also dirs and dirs -c.
You may be interested in the cdh command which provides a more intuitive way to navigate to recently visited directories.
pushd /usr/src # Working directory is now /usr/src # Directory stack contains /usr/src pushd /usr/src/fish-shell # Working directory is now /usr/src/fish-shell # Directory stack contains /usr/src /usr/src/fish-shell pushd /tmp/ # Working directory is now /tmp # Directory stack contains /tmp /usr/src /usr/src/fish-shell pushd +1 # Working directory is now /usr/src # Directory stack contains /usr/src /usr/src/fish-shell /tmp popd # Working directory is now /usr/src/fish-shell # Directory stack contains /usr/src/fish-shell /tmp
Back to command index.
pwd
pwd outputs (prints) the current working directory.
Note that fish always resolves symbolic links in the current directory path.
Back to command index.
random random SEED random START END random START STEP END random choice [ITEMS...]
RANDOM generates a pseudo-random integer from a uniform distribution. The range (inclusive) is dependent on the arguments passed. No arguments indicate a range of [0; 32767]. If one argument is specified, the internal engine will be seeded with the argument for future invocations of RANDOM and no output will be produced. Two arguments indicate a range of [START; END]. Three arguments indicate a range of [START; END] with a spacing of STEP between possible outputs. RANDOM choice will select one random item from the succeeding arguments.
Note that seeding the engine will NOT give the same result across different systems.
You should not consider RANDOM cryptographically secure, or even statistically accurate.
The following code will count down from a random even number between 10 and 20 to 1:
\nfor i in (seq (random 10 2 20) -1 1) echo $i end
And this will open a random picture from any of the subdirectories:
open (random choice **jpg)
Back to command index.
read [OPTIONS] [VARIABLES...]
read reads from standard input and stores the result in one or more shell variables. By default, one line (terminated by a newline) is read into each variable. Alternatively, a null character or a maximum number of characters can be used to terminate the input. Unlike other shells, there is no default variable (such as REPLY) for storing the result.
The following options are available:
-c CMD or --command=CMD sets the initial string in the interactive mode command buffer to CMD.-g or --global makes the variables global.-i or --silent makes the characters typed obfuscated. This is useful for reading things like passwords or other sensitive information. Note that in bash the short flag is -s. We can't use that due to the existing use as an alias for --shell.-l or --local makes the variables local.-n NCHARS or --nchars=NCHARS makes read return after reading NCHARS characters or the end of the line, whichever comes first.-p PROMPT_CMD or --prompt=PROMPT_CMD uses the output of the shell command PROMPT_CMD as the prompt for the interactive mode. The default prompt command is set_color green; echo read; set_color normal; echo "> ".-P PROMPT_STR or --prompt-str=PROMPT_STR uses the string as the prompt for the interactive mode. It is equivalent to echo PROMPT_STR and is provided solely to avoid the need to frame the prompt as a command. All special characters in the string are automatically escaped before being passed to the echo command.-R RIGHT_PROMPT_CMD or --right-prompt=RIGHT_PROMPT_CMD uses the output of the shell command RIGHT_PROMPT_CMD as the right prompt for the interactive mode. There is no default right prompt command.-s or --shell enables syntax highlighting, tab completions and command termination suitable for entering shellscript code in the interactive mode.-u or --unexport prevents the variables from being exported to child processes (default behaviour).-U or --universal causes the specified shell variable to be made universal.-x or --export exports the variables to child processes.-a or --array stores the result as an array in a single variable.-z or --null marks the end of the line with the NUL character, instead of newline. This also disables interactive mode.read reads a single line of input from stdin, breaks it into tokens based on the IFS shell variable, and then assigns one token to each variable specified in VARIABLES. If there are more tokens than variables, the complete remainder is assigned to the last variable. As a special case, if IFS is set to the empty string, each character of the input is considered a separate token.
If -a or --array is provided, only one variable name is allowed and the tokens are stored as an array in this variable.
See the documentation for set for more details on the scoping rules for variables.
When read reaches the end-of-file (EOF) instead of the terminator, the exit status is set to 1. Otherwise, it is set to 0.
In order to protect the shell from consuming too many system resources, read will only consume a maximum of 10 MiB (1048576 bytes); if the terminator is not reached before this limit then VARIABLE is set to empty and the exit status is set to 122. This limit can be altered with the FISH_READ_BYTE_LIMIT variable. If set to 0 (zero), the limit is removed.
The read command supported the -m and --mode-name flags in fish versions prior to 2.7.0 to specify an alternative read history file. Those flags are now deprecated and ignored. Instead, set the fish_history variable to specify a history session ID. That will affect both the read history file and the fish command history file. You can set it to an empty string to specify that no history should be read or written. This is useful for presentations where you do not want possibly private or sensitive history to be exposed to the audience but do want history relevant to the presentation to be available.
The following code stores the value 'hello' in the shell variable $foo.
echo hello|read foo # This is a neat way to handle command output by-line: printf '%s\n' line1 line2 line3 line4 | while read -l foo echo "This is another line: $foo" end
Back to command index.
realpath path
This is implemented as a function and a builtin. The function will attempt to use an external realpath command if one can be found. Otherwise it falls back to the builtin. The builtin does not support any options. It's meant to be used only by scripts which need to be portable. The builtin implementation behaves like GNU realpath when invoked without any options (which is the most common use case). In general scripts should not invoke the builtin directly. They should just use realpath.
If the path is invalid no translated path will be written to stdout and an error will be reported.
Back to command index.
function NAME; [COMMANDS...;] return [STATUS]; [COMMANDS...;] end
return halts a currently running function. The exit status is set to STATUS if it is given.
It is usually added inside of a conditional block such as an if statement or a switch statement to conditionally stop the executing function and return to the caller, but it can also be used to specify the exit status of a function.
The following code is an implementation of the false command as a fish function
\nfunction false return 1 end
Back to command index.
set [SCOPE_OPTIONS] set [OPTIONS] VARIABLE_NAME VALUES... set [OPTIONS] VARIABLE_NAME[INDICES]... VALUES... set ( -q | --query ) [SCOPE_OPTIONS] VARIABLE_NAMES... set ( -e | --erase ) [SCOPE_OPTIONS] VARIABLE_NAME set ( -e | --erase ) [SCOPE_OPTIONS] VARIABLE_NAME[INDICES]... set ( -S | --show ) [SCOPE_OPTIONS] [VARIABLE_NAME]...
set manipulates shell variables.
If set is called with no arguments, the names and values of all shell variables are printed in sorted order. If some of the scope or export flags have been given, only the variables matching the specified scope are printed.
With both variable names and values provided, set assigns the variable VARIABLE_NAME the values VALUES....
The following options control variable scope:
-l or --local forces the specified shell variable to be given a scope that is local to the current block, even if a variable with the given name exists and is non-local-g or --global causes the specified shell variable to be given a global scope. Non-global variables disappear when the block they belong to ends-U or --universal causes the specified shell variable to be given a universal scope. If this option is supplied, the variable will be shared between all the current users fish instances on the current computer, and will be preserved across restarts of the shell.-x or --export causes the specified shell variable to be exported to child processes (making it an "environment variable")-u or --unexport causes the specified shell variable to NOT be exported to child processesThe following options are available:
-e or --erase causes the specified shell variable to be erased-q or --query test if the specified variable names are defined. Does not output anything, but the builtins exit status is the number of variables specified that were not defined.-n or --names List only the names of all defined variables, not their value. The names are guaranteed to be sorted.-S or --show Shows information about the given variables. If no variable names are given then all variables are shown in sorted order. No other flags can be used with this option. The information shown includes whether or not it is set in each of the local, global, and universal scopes. If it is set in one of those scopes whether or not it is exported is reported. The individual elements are also shown along with the length of each element.-L or --long do not abbreviate long values when printing set variablesIf a variable is set to more than one value, the variable will be an array with the specified elements. If a variable is set to zero elements, it will become an array with zero elements.
If the variable name is one or more array elements, such as PATH[1 3 7], only those array elements specified will be changed. If you specify a negative index when expanding or assigning to an array variable, the index will be calculated from the end of the array. For example, the index -1 means the last index of an array.
The scoping rules when creating or updating a variable are:
-l or --local flag. If one of those flags is used, the variable will be local to the most inner currently executing block, while without these the variable will be local to the function. If no function is executing, the variable will be global.The exporting rules when creating or updating a variable are identical to the scoping rules for variables:
In query mode, the scope to be examined can be specified.
In erase mode, if variable indices are specified, only the specified slices of the array variable will be erased.
set requires all options to come before any other arguments. For example, set flags -l will have the effect of setting the value of the variable flags to '-l', not making the variable local.
In assignment mode, set does not modify the exit status. This allows simultaneous capture of the output and exit status of a subcommand, e.g. if set output (command). In query mode, the exit status is the number of variables that were not found. In erase mode, set exits with a zero exit status in case of success, with a non-zero exit status if the commandline was invalid, if the variable was write-protected or if the variable did not exist.
set -xg # Prints all global, exported variables. set foo hi # Sets the value of the variable $foo to be 'hi'. set -e smurf # Removes the variable $smurf set PATH[4] ~/bin # Changes the fourth element of the $PATH array to ~/bin if set python_path (type -p python) echo "Python is at $python_path" end # Outputs the path to Python if `type -p` returns true.
Back to command index.
set_color [OPTIONS] VALUE
set_color is used to control the color and styling of text in the terminal. VALUE corresponds to a reserved color name such as red or a RGB color value given as 3 or 6 hexadecimal digits. The br-, as in 'bright', forms are full-brightness variants of the 8 standard-brightness colors on many terminals. brblack has higher brightness than black - towards gray. A special keyword normal resets text formatting to terminal defaults.
Valid colors include:
An RGB value with three or six hex digits, such as A0FF33 or f2f can be used. fish will choose the closest supported color. A three digit value is equivalent to specifying each digit twice; e.g., set_color 2BC is the same as set_color 22BBCC. Hexadecimal RGB values can be in lower or uppercase. Depending on the capabilities of your terminal (and the level of support set_color has for it) the actual color may be approximated by a nearby matching reserved color name or set_color may not have an effect on color. A second color may be given as a desired fallback color. e.g. set_color 124212 brblue will instruct set_color to use brblue if a terminal is not capable of the exact shade of grey desired. This is very useful when an 8 or 16 color terminal might otherwise not use a color.
The following options are available:
-b, --background COLOR sets the background color.-c, --print-colors prints a list of the 16 named colors.-o, --bold sets bold mode.-d, --dim sets dim mode.-i, --italics sets italics mode.-r, --reverse sets reverse mode.-u, --underline sets underlined mode.Using the normal keyword will reset foreground, background, and all formatting back to default.
--bold escape sequence to switch to a brighter color set rather than increasing the weight of text.set_color works by printing sequences of characters to stdout. If used in command substitution or a pipe, these characters will also be captured. This may or may not be desirable. Checking the exit code of isatty stdout before using set_color can be useful to decide not to colorize output in a script.set_color red; echo "Roses are red" set_color blue; echo "Violets are blue" set_color 62A; echo "Eggplants are dark purple" set_color normal; echo "Normal is nice" ## Resets the background too
Fish uses a heuristic to decide if a terminal supports the 256-color palette as opposed to the more limited 16 color palette of older terminals. Support can be forced on by setting fish_term256 to 1. If $TERM contains "256color" (e.g., xterm-256color), 256-color support is enabled. If $TERM contains xterm, 256 color support is enabled (except for MacOS: $TERM_PROGRAM and $TERM_PROGRAM_VERSION are used to detect Terminal.app from MacOS 10.6; support is disabled here it because it is known that it reports xterm and only supports 16 colors.
If terminfo reports 256 color support for a terminal, support will always be enabled. To debug color palette problems, tput colors may be useful to see the number of colors in terminfo for a terminal. Fish launched as fish -d2 will include diagnostic messages that indicate the color support mode in use.
Many terminals support 24-bit (i.e., true-color) color escape sequences. This includes modern xterm, Gnome Terminal, Konsole, and iTerm2. Fish attempts to detect such terminals through various means in config.fish You can explicitly force that support via set fish_term24bit 1.
The set_color command uses the terminfo database to look up how to change terminal colors on whatever terminal is in use. Some systems have old and incomplete terminfo databases, and may lack color information for terminals that support it. Fish will assume that all terminals can use the ANSI X3.64 escape sequences if the terminfo definition indicates a color below 16 is not supported.
Support for italics, dim, reverse, and other modes is not guaranteed in all terminal emulators. Fish attempts to determine if the terminal supports these modes even if the terminfo database may not be up-to-date.
Back to command index.
source FILENAME [ARGUMENTS...]
source evaluates the commands of the specified file in the current shell. This is different from starting a new process to perform the commands (i.e. fish < FILENAME) since the commands will be evaluated by the current shell, which means that changes in shell variables will affect the current shell. If additional arguments are specified after the file name, they will be inserted into the $argv variable. The $argv variable will not include the name of the sourced file.
If no file is specified, or if the file name '-' is used, stdin will be read.
The return status of source is the return status of the last job to execute. If something goes wrong while opening or reading the file, source exits with a non-zero status.
. (a single period) is an alias for the source command. The use of . is deprecated in favour of source, and . will be removed in a future version of fish.
source ~/.config/fish/config.fish # Causes fish to re-read its initialization file.
In fish versions prior to 2.3.0 the $argv variable would have a single element (the name of the sourced file) if no arguments are present. Otherwise it would contain arguments without the name of the sourced file. That behavior was very confusing and unlike other shells such as bash and zsh.
Back to command index.
status status is-login status is-interactive status is-block status is-breakpoint status is-command-substitution status is-no-job-control status is-full-job-control status is-interactive-job-control status filename status function status line-number status stack-trace status job-control CONTROL-TYPE
With no arguments, status displays a summary of the current login and job control status of the shell.
The following operations (sub-commands) are available:
is-command-sub returns 0 if fish is currently executing a command substitution. Also -c or --is-command-substitution.is-block returns 0 if fish is currently executing a block of code. Also -b or --is-block.is-breakpoint returns 0 if fish is currently showing a prompt in the context of a breakpoint command. See also the fish_breakpoint_prompt function.is-interactive returns 0 if fish is interactive - that is, connected to a keyboard. Also -i or --is-interactive.is-login returns 0 if fish is a login shell - that is, if fish should perform login tasks such as setting up the PATH. Also -l or --is-login.is-full-job-control returns 0 if full job control is enabled. Also --is-full-job-control (no short flag).is-interactive-job-control returns 0 if interactive job control is enabled. Also, --is-interactive-job-control (no short flag).is-no-job-control returns 0 if no job control is enabled. Also --is-no-job-control (no short flag).filename prints the filename of the currently running script. Also current-filename, -f or --current-filename.function prints the name of the currently called function if able, when missing displays "Not a
function" (or equivalent translated string). Also current-function, -u or --current-function.line-number prints the line number of the currently running script. Also current-line-number, -n or --current-line-number.job-control CONTROL-TYPE sets the job control type, which can be none, full, or interactive. Also -j CONTROL-TYPE or --job-control=CONTROL-TYPE.stack-trace prints a stack trace of all function calls on the call stack. Also print-stack-trace, -t or --print-stack-trace.For backwards compatibility each subcommand can also be specified as a long or short option. For example, rather than status is-login you can type status --is-login. The flag forms are deprecated and may be removed in a future release (but not before fish 3.0).
You can only specify one subcommand per invocation even if you use the flag form of the subcommand.
Back to command index.
string escape [(-n | --no-quoted)] [--style=xxx] [STRING...] string join [(-q | --quiet)] SEP [STRING...] string length [(-q | --quiet)] [STRING...] string lower [(-q | --quiet)] [STRING...] string match [(-a | --all)] [((-e | --entire)] [(-i | --ignore-case)] [(-r | --regex)] [(-n | --index)] [(-q | --quiet)] [(-v | --invert)] PATTERN [STRING...] string repeat [(-n | --count) COUNT] [(-m | --max) MAX] [(-N | --no-newline)] [(-q | --quiet)] [STRING...] string replace [(-a | --all)] [(-f | --filter)] [(-i | --ignore-case)] [(-r | --regex)] [(-q | --quiet)] PATTERN REPLACEMENT [STRING...] string split [(-m | --max) MAX] [(-r | --right)] [(-q | --quiet)] SEP [STRING...] string sub [(-s | --start) START] [(-l | --length) LENGTH] [(-q | --quiet)] [STRING...] string trim [(-l | --left)] [(-r | --right)] [(-c | --chars CHARS)] [(-q | --quiet)] [STRING...] string unescape [--style=xxx] [STRING...] string upper [(-q | --quiet)] [STRING...]
string performs operations on strings.
STRING arguments are taken from the command line unless standard input is connected to a pipe or a file, in which case they are read from standard input, one STRING per line. It is an error to supply STRING arguments on the command line and on standard input.
Arguments beginning with - are normally interpreted as switches; -- causes the following arguments not to be treated as switches even if they begin with -. Switches and required arguments are recognized only on the command line.
Most subcommands accept a -q or --quiet switch, which suppresses the usual output but exits with the documented status.
The following subcommands are available.
string escape escapes each STRING in one of three ways. The first is --style=script. This is the default. It alters the string such that it can be passed back to eval to produce the original argument again. By default, all special characters are escaped, and quotes are used to simplify the output when possible. If -n or --no-quoted is given, the simplifying quoted format is not used. Exit status: 0 if at least one string was escaped, or 1 otherwise.
The second is --style=var which ensures the string can be used as a variable name by hex encoding any non-alphanumeric characters. The string is first converted to UTF-8 before being encoded.
The third is --style=url which ensures the string can be used as a URL by hex encoding any character which is not legal in a URL. The string is first converted to UTF-8 before being encoded.
string unescape performs the inverse of the string escape command. If the string to be unescaped is not properly formatted it is ignored. For example, doing string unescape --style=var (string escape --style=var $str) will return the original string.
string join joins its STRING arguments into a single string separated by SEP, which can be an empty string. Exit status: 0 if at least one join was performed, or 1 otherwise.
string length reports the length of each string argument in characters. Exit status: 0 if at least one non-empty STRING was given, or 1 otherwise.
string lower converts each string argument to lowercase. Exit status: 0 if at least one string was converted to lowercase, else 1. This means that in conjunction with the -q flag you can readily test whether a string is already lowercase.
string match tests each STRING against PATTERN and prints matching substrings. Only the first match for each STRING is reported unless -a or --all is given, in which case all matches are reported.
If you specify the -e or --entire then each matching string is printed including any prefix or suffix not matched by the pattern (equivalent to grep without the -o flag). You can, obviously, achieve the same result by prepending and appending * or .* depending on whether or not you have specified the --regex flag. The --entire flag is simply a way to avoid having to complicate the pattern in that fashion and make the intent of the string match clearer. Without --entire and --regex, a PATTERN will need to match the entire STRING before it will be reported.
Matching can be made case-insensitive with --ignore-case or -i.
If --index or -n is given, each match is reported as a 1-based start position and a length. By default, PATTERN is interpreted as a glob pattern matched against each entire STRING argument. A glob pattern is only considered a valid match if it matches the entire STRING.
If --regex or -r is given, PATTERN is interpreted as a Perl-compatible regular expression, which does not have to match the entire STRING. For a regular expression containing capturing groups, multiple items will be reported for each match, one for the entire match and one for each capturing group. With this, only the matching part of the STRING will be reported, unless --entire is given.
If --invert or -v is used the selected lines will be only those which do not match the given glob pattern or regular expression.
Exit status: 0 if at least one match was found, or 1 otherwise.
string repeat repeats the STRING -n or --count times. The -m or --max option will limit the number of outputed char (excluding the newline). This option can be used by itself or in conjuction with --count. If both --count and --max are present, max char will be outputed unless the final repeated string size is less than max, in that case, the string will repeat until count has been reached. Both --count and --max will accept a number greater than or equal to zero, in the case of zero, nothing will be outputed. If -N or --no-newline is given, the output won't contain a newline character at the end. Exit status: 0 if yielded string is not empty, 1 otherwise.
string replace is similar to string match but replaces non-overlapping matching substrings with a replacement string and prints the result. By default, PATTERN is treated as a literal substring to be matched.
If -r or --regex is given, PATTERN is interpreted as a Perl-compatible regular expression, and REPLACEMENT can contain C-style escape sequences like \t as well as references to capturing groups by number or name as $n or ${n}.
If you specify the -f or --filter flag then each input string is printed only if a replacement was done. This is useful where you would otherwise use this idiom: a_cmd | string match pattern | string replace pattern new_pattern. You can instead just write a_cmd | string replace --filter pattern new_pattern.
Exit status: 0 if at least one replacement was performed, or 1 otherwise.
string split splits each STRING on the separator SEP, which can be an empty string. If -m or --max is specified, at most MAX splits are done on each STRING. If -r or --right is given, splitting is performed right-to-left. This is useful in combination with -m or --max. Exit status: 0 if at least one split was performed, or 1 otherwise.
string sub prints a substring of each string argument. The start of the substring can be specified with -s or --start followed by a 1-based index value. Positive index values are relative to the start of the string and negative index values are relative to the end of the string. The default start value is 1. The length of the substring can be specified with -l or --length. If the length is not specified, the substring continues to the end of each STRING. Exit status: 0 if at least one substring operation was performed, 1 otherwise.
string trim removes leading and trailing whitespace from each STRING. If -l or --left is given, only leading whitespace is removed. If -r or --right is given, only trailing whitespace is trimmed. The -c or --chars switch causes the characters in CHARS to be removed instead of whitespace. Exit status: 0 if at least one character was trimmed, or 1 otherwise.
string upper converts each string argument to uppercase. Exit status: 0 if at least one string was converted to uppercase, else 1. This means that in conjunction with the -q flag you can readily test whether a string is already uppercase.
Both the match and replace subcommand support regular expressions when used with the -r or --regex option. The dialect is that of PCRE2.
In general, special characters are special by default, so a+ matches one or more "a"s, while a\+ matches an "a" and then a "+". (a+) matches one or more "a"s in a capturing group ((?:XXXX) denotes a non-capturing group). For the replacement parameter of replace, $n refers to the n-th group of the match. In the match parameter, \n (e.g. \1) refers back to groups.
> string length 'hello, world' 12 > set str foo > string length -q $str; echo $status 0 # Equivalent to test -n $str
> string sub --length 2 abcde ab > string sub -s 2 -l 2 abcde bc > string sub --start=-2 abcde de
> string split . example.com example com > string split -r -m1 / /usr/local/bin/fish /usr/local/bin fish > string split '' abc a b c
> seq 3 | string join ... 1...2...3
> string trim ' abc ' abc > string trim --right --chars=yz xyzzy zany x zan
> echo \x07 | string escape \cg
> string escape --style=var 'a1 b2'\\u6161 \a1_20b2__c_E6_85_A1
> string match '?' a a > string match 'a*b' axxb axxb > string match -i 'a??B' Axxb Axxb > echo 'ok?' | string match '*\?' ok? # Note that only the second STRING will match here. > string match 'foo' 'foo1' 'foo' 'foo2' foo > string match -e 'foo' 'foo1' 'foo' 'foo2' foo1 foo foo2 > string match 'foo?' 'foo1' 'foo' 'foo2' foo1 foo foo2
> string match -r 'cat|dog|fish' 'nice dog' dog > string match -r -v "c.*[12]" {cat,dog}(seq 1 4) dog1 dog2 cat3 dog3 cat4 dog4 > string match -r '(\d\d?):(\d\d):(\d\d)' 2:34:56 2:34:56 2 34 56 > string match -r '^(\w{2,4})\g1$' papa mud murmur papa pa murmur mur > string match -r -a -n at ratatat 2 2 4 2 6 2 > string match -r -i '0x[0-9a-f]{1,8}' 'int magic = 0xBadC0de;' 0xBadC0de
> string replace is was 'blue is my favorite' blue was my favorite > string replace 3rd last 1st 2nd 3rd 1st 2nd last > string replace -a ' ' _ 'spaces to underscores' spaces_to_underscores
> string replace -r -a '[^\d.]+' ' ' '0 one two 3.14 four 5x' 0 3.14 5 > string replace -r '(\w+)\s+(\w+)' '$2 $1 $$' 'left right' right left $ > string replace -r '\s*newline\s*' '\n' 'put a newline here' put a here
> string repeat -n 2 'foo ' foo foo > echo foo | string repeat -n 2 foofoo > string repeat -n 2 -m 5 'foo' foofo > string repeat -m 5 'foo' foofo
Back to command index.
suspend [--force]
suspend suspends execution of the current shell by sending it a SIGTSTP signal, returning to the controlling process. It can be resumed later by sending it a SIGCONT. In order to prevent suspending a shell that doesn't have a controlling process, it will not suspend the shell if it is a login shell. This requirement is bypassed if the --force option is given or the shell is not interactive.
Back to command index.
switch VALUE; [case [WILDCARD...]; [COMMANDS...]; ...] end
switch performs one of several blocks of commands, depending on whether a specified value equals one of several wildcarded values. case is used together with the switch statement in order to determine which block should be executed.
Each case command is given one or more parameters. The first case command with a parameter that matches the string specified in the switch command will be evaluated. case parameters may contain wildcards. These need to be escaped or quoted in order to avoid regular wildcard expansion using filenames.
Note that fish does not fall through on case statements. Only the first matching case is executed.
Note that command substitutions in a case statement will be evaluated even if its body is not taken. All substitutions, including command substitutions, must be performed before the value can be compared against the parameter.
If the variable $animal contains the name of an animal, the following code would attempt to classify it:
\nswitch $animal case cat echo evil case wolf dog human moose dolphin whale echo mammal case duck goose albatross echo bird case shark trout stingray echo fish case '*' echo I have no idea what a $animal is end
If the above code was run with $animal set to whale, the output would be mammal.
Back to command index.
test [EXPRESSION] [ [EXPRESSION] ]
Tests the expression given and sets the exit status to 0 if true, and 1 if false. An expression is made up of one or more operators and their arguments.
The first form (test) is preferred. For compatibility with other shells, the second form is available: a matching pair of square brackets ([ [EXPRESSION ] ]).
This test is mostly POSIX-compatible.
When using a variable as an argument for a test operator you should almost always enclose it in double-quotes. There are only two situations it is safe to omit the quote marks. The first is when the argument is a literal string with no whitespace or other characters special to the shell (e.g., semicolon). For example, test -b /my/file. The second is using a variable that expands to exactly one element including if that element is the empty string (e.g., ‘set x ’'). If the variable is not set, set but with no value, or set to more than one value you must enclose it in double-quotes. For example,test "$x" = "$y". Since it is always safe to enclose variables in double-quotes when used astest` arguments that is the recommended practice.
-b FILE returns true if FILE is a block device.-c FILE returns true if FILE is a character device.-d FILE returns true if FILE is a directory.-e FILE returns true if FILE exists.-f FILE returns true if FILE is a regular file.-g FILE returns true if FILE has the set-group-ID bit set.-G FILE returns true if FILE exists and has the same group ID as the current user.-k FILE returns true if FILE has the sticky bit set. If the OS does not support the concept it returns false. See https://en.wikipedia.org/wiki/Sticky_bit.-L FILE returns true if FILE is a symbolic link.-O FILE returns true if FILE exists and is owned by the current user.-p FILE returns true if FILE is a named pipe.-r FILE returns true if FILE is marked as readable.-s FILE returns true if the size of FILE is greater than zero.-S FILE returns true if FILE is a socket.-t FD returns true if the file descriptor FD is a terminal (TTY).-u FILE returns true if FILE has the set-user-ID bit set.-w FILE returns true if FILE is marked as writable; note that this does not check if the filesystem is read-only.-x FILE returns true if FILE is marked as executable.STRING1 = STRING2 returns true if the strings STRING1 and STRING2 are identical.STRING1 != STRING2 returns true if the strings STRING1 and STRING2 are not identical.-n STRING returns true if the length of STRING is non-zero.-z STRING returns true if the length of STRING is zero.NUM1 -eq NUM2 returns true if NUM1 and NUM2 are numerically equal.NUM1 -ne NUM2 returns true if NUM1 and NUM2 are not numerically equal.NUM1 -gt NUM2 returns true if NUM1 is greater than NUM2.NUM1 -ge NUM2 returns true if NUM1 is greater than or equal to NUM2.NUM1 -lt NUM2 returns true if NUM1 is less than NUM2.NUM1 -le NUM2 returns true if NUM1 is less than or equal to NUM2.Note that only integers are supported. For more complex mathematical operations, including fractions, the env program may be useful. Consult the documentation for your operating system.
COND1 -a COND2 returns true if both COND1 and COND2 are true.COND1 -o COND2 returns true if either COND1 or COND2 are true.Expressions can be inverted using the ! operator:
! EXPRESSION returns true if EXPRESSION is false, and false if EXPRESSION is true.Expressions can be grouped using parentheses.
( EXPRESSION ) returns the value of EXPRESSION.
Note that parentheses will usually require escaping with \( to avoid being interpreted as a command substitution.
If the /tmp directory exists, copy the /etc/motd file to it:
if test -d /tmp cp /etc/motd /tmp/motd end
If the variable MANPATH is defined and not empty, print the contents. (If MANPATH is not defined, then it will expand to zero arguments, unless quoted.)
if test -n "$MANPATH" echo $MANPATH end
Parentheses and the -o and -a operators can be combined to produce more complicated expressions. In this example, success is printed if there is a /foo or /bar file as well as a /baz or /bat file.
if test \( -f /foo -o -f /bar \) -a \( -f /baz -o -f /bat \) echo Success. end.
Numerical comparisons will simply fail if one of the operands is not a number:
if test 42 -eq "The answer to life, the universe and everything" echo So long and thanks for all the fish ## will not be executed end
A common comparison is with $status:
if test $status -eq 0 echo "Previous command succeeded" end
The previous test can likewise be inverted:
if test ! $status -eq 0 echo "Previous command failed" end
which is logically equivalent to the following:
if test $status -ne 0 echo "Previous command failed" end
test implements a subset of the IEEE Std 1003.1-2008 (POSIX.1) standard. The following exceptions apply:
< and > operators for comparing strings are not implemented.Because this test is a shell builtin and not a standalone utility, using the -c flag on a special file descriptors like standard input and output may not return the same result when invoked from within a pipe as one would expect when invoking the test utility in another shell.
In cases such as this, one can use command test to explicitly use the system's standalone test rather than this builtin test.
Back to command index.
trap [OPTIONS] [[ARG] REASON ... ]
trap is a wrapper around the fish event delivery framework. It exists for backwards compatibility with POSIX shells. For other uses, it is recommended to define an event handler.
The following parameters are available:
ARG is the command to be executed on signal delivery.REASON is the name of the event to trap. For example, a signal like INT or SIGINT, or the special symbol EXIT.-l or --list-signals prints a list of signal names.-p or --print prints all defined signal handlers.If ARG and REASON are both specified, ARG is the command to be executed when the event specified by REASON occurs (e.g., the signal is delivered).
If ARG is absent (and there is a single REASON) or -, each specified signal is reset to its original disposition (the value it had upon entrance to the shell). If ARG is the null string the signal specified by each REASON is ignored by the shell and by the commands it invokes.
If ARG is not present and -p has been supplied, then the trap commands associated with each REASON are displayed. If no arguments are supplied or if only -p is given, trap prints the list of commands associated with each signal.
Signal names are case insensitive and the SIG prefix is optional.
The return status is 1 if any REASON is invalid; otherwise trap returns 0.
trap "status --print-stack-trace" SIGUSR1 # Prints a stack trace each time the SIGUSR1 signal is sent to the shell.
Back to command index.
true
true sets the exit status to 0.
Back to command index.
type [OPTIONS] NAME [NAME ...]
With no options, type indicates how each NAME would be interpreted if used as a command name.
The following options are available:
-a or --all prints all of possible definitions of the specified names.-f or --no-functions suppresses function and builtin lookup.-t or --type prints function, builtin, or file if NAME is a shell function, builtin, or disk file, respectively.-p or --path returns the name of the disk file that would be executed, or nothing if type -t name would not return file.-P or --force-path returns the name of the disk file that would be executed, or nothing if no file with the specified name could be found in the $PATH.-q or --quiet suppresses all output; this is useful when testing the exit status.The -q, -p, -t and -P flags (and their long flag aliases) are mutually exclusive. Only one can be specified at a time.
> type fg fg is a builtin
Back to command index.
ulimit [OPTIONS] [LIMIT]
ulimit builtin sets or outputs the resource usage limits of the shell and any processes spawned by it. If a new limit value is omitted, the current value of the limit of the resource is printed; otherwise, the specified limit is set to the new value.
Use one of the following switches to specify which resource limit to set or report:
-c or --core-size: the maximum size of core files created. By setting this limit to zero, core dumps can be disabled.-d or --data-size: the maximum size of a process' data segment.-f or --file-size: the maximum size of files created by the shell.-l or --lock-size: the maximum size that may be locked into memory.-m or --resident-set-size: the maximum resident set size.-n or --file-descriptor-count: the maximum number of open file descriptors (most systems do not allow this value to be set).-s or --stack-size: the maximum stack size.-t or --cpu-time: the maximum amount of CPU time in seconds.-u or --process-count: the maximum number of processes available to a single user.-v or --virtual-memory-size The maximum amount of virtual memory available to the shell.Note that not all these limits are available in all operating systems.
The value of limit can be a number in the unit specified for the resource or one of the special values hard, soft, or unlimited, which stand for the current hard limit, the current soft limit, and no limit, respectively.
If limit is given, it is the new value of the specified resource. If no option is given, then -f is assumed. Values are in kilobytes, except for -t, which is in seconds and -n and -u, which are unscaled values. The return status is 0 unless an invalid option or argument is supplied, or an error occurs while setting a new limit.
ulimit also accepts the following switches that determine what type of limit to set:
-H or --hard sets hard resource limit-S or --soft sets soft resource limitA hard limit can only be decreased. Once it is set it cannot be increased; a soft limit may be increased up to the value of the hard limit. If neither -H nor -S is specified, both the soft and hard limits are updated when assigning a new limit value, and the soft limit is used when reporting the current value.
The following additional options are also understood by ulimit:
-a or --all prints all current limitsThe fish implementation of ulimit should behave identically to the implementation in bash, except for these differences:
ulimit supports GNU-style long options for all switchesulimit does not support the -p option for getting the pipe size. The bash implementation consists of a compile-time check that empirically guesses this number by writing to a pipe and waiting for SIGPIPE. Fish does not do this because it this method of determining pipe size is unreliable. Depending on bash version, there may also be further additional limits to set in bash that do not exist in fish.ulimit does not support getting or setting multiple limits in one command, except reporting all values using the -a switchulimit -Hs 64 sets the hard stack size limit to 64 kB.
Back to command index.
umask [OPTIONS] [MASK]
umask displays and manipulates the "umask", or file creation mode mask, which is used to restrict the default access to files.
The umask may be expressed either as an octal number, which represents the rights that will be removed by default, or symbolically, which represents the only rights that will be granted by default.
Access rights are explained in the manual page for the chmod(1) program.
With no parameters, the current file creation mode mask is printed as an octal number.
-h or --help prints this message.-S or --symbolic prints the umask in symbolic form instead of octal form.-p or --as-command outputs the umask in a form that may be reused as inputIf a numeric mask is specified as a parameter, the current shell's umask will be set to that value, and the rights specified by that mask will be removed from new files and directories by default.
If a symbolic mask is specified, the desired permission bits, and not the inverse, should be specified. A symbolic mask is a comma separated list of rights. Each right consists of three parts:
u, g, o or a, where u specifies the user who owns the file, g specifies the group owner of the file, o specific other users rights and a specifies all three should be changed.=, + or -, where = specifies that the rights should be set to the new value, + specifies that the specified right should be added to those previously specified and - specifies that the specified rights should be removed from those previously specified.r, w and x, representing read, write and execute rights.If the first and second parts are skipped, they are assumed to be a and =, respectively. As an example, r,u+w means all users should have read access and the file owner should also have write access.
Note that symbolic masks currently do not work as intended.
umask 177 or umask u=rw sets the file creation mask to read and write for the owner and no permissions at all for any other users.
Back to command index.
vared VARIABLE_NAME
vared is used to interactively edit the value of an environment variable. Array variables as a whole can not be edited using vared, but individual array elements can.
vared PATH[3] edits the third element of the PATH array
Back to command index.
while CONDITION; COMMANDS...; end
while repeatedly executes CONDITION, and if the exit status is 0, then executes COMMANDS.
If the exit status of CONDITION is non-zero on the first iteration, COMMANDS will not be executed at all.
You can use and or or for complex conditions. Even more complex control can be achieved with while true containing a break.
while test -f foo.txt; or test -f bar.txt ; echo file exists; sleep 10; end # outputs 'file exists' at 10 second intervals as long as the file foo.txt or bar.txt exists.
Back to command index.