|Index||index by Group||index by Distribution||index by Vendor||index by creation date||index by Name||Mirrors||Help||Search|
|Name: zlib-devel||Distribution: openSUSE Leap 15.0|
|Version: 1.2.11||Vendor: openSUSE|
|Release: lp126.96.36.199||Build date: Tue Sep 25 12:14:01 2018|
|Group: Development/Languages/C and C++||Build host: lamb05|
|Size: 395192||Source RPM: zlib-1.2.11-lp188.8.131.52.src.rpm|
|Summary: Development files for zlib, a data compression library|
zlib is a general-purpose lossless data-compression library, implementing an API for the DEFLATE algorithm, the latter of which is being used by, for example, gzip and the ZIP archive format. This subpackage holds the development headers for the library. The zlib data format is itself portable across platforms. Unlike the LZW compression method used in unix compress(1) and in the GIF image format, the compression method currently used in zlib essentially never expands the data. (LZW can double or triple the file size in extreme cases.) zlib's memory footprint is also independent of the input data and can be reduced, if necessary, at some cost in compression.
* Wed Jun 20 2018 email@example.com - Add patch for fate#325307 zlib speedup on power8: * zlib-power8-fate325307.patch * Tue May 15 2018 firstname.lastname@example.org - Add patch to safeguard against negative values in uInt bsc#1071321: * 0001-Do-not-try-to-store-negative-values-in-unsigned-int.patch * Mon Jun 12 2017 email@example.com - Added 32bit minizip support * Thu Jun 01 2017 firstname.lastname@example.org - Add gpg signature - Re-enable profiling * Wed May 10 2017 email@example.com - Add s390 performance patch (fate#314093): * zlib-1.2.11-optimized-s390.patch * Tue Apr 04 2017 firstname.lastname@example.org - baselibs.conf: add missing dependencies * Mon Jan 16 2017 email@example.com - Update to version 1.2.11: * Fix deflate stored bug when pulling last block from window * Permit immediate deflateParams changes before any deflate input * Tue Jan 03 2017 firstname.lastname@example.org - Update to version 1.2.10: * Avoid warnings on snprintf() return value * Fix bug in deflate_stored() for zero-length input * Fix bug in gzwrite.c that produced corrupt gzip files * Remove files to be installed before copying them in Makefile.in * Add warnings when compiling with assembler code * Mon Jan 02 2017 email@example.com - Update to version 1.2.9: * Improve compress() and uncompress() to support large lengths * Allow building zlib outside of the source directory * Fix bug when level 0 used with Z_HUFFMAN or Z_RLE * Fix bugs in creating a very large gzip header * Add uncompress2() function, which returns the input size used * Dramatically speed up deflation for level 0 (storing) * Add gzfread() and gzfwrite(), duplicating the interfaces of fread() and fwrite() * Add crc32_z() and adler32_z() functions with size_t lengths * Many portability improvements - Drop patches included in upstream: * zlib-bnc1003577.patch * zlib-bnc1003579-part2.patch * zlib-bnc1003579.patch * zlib-bnc1003580.patch * zlib-bnc1013882.patch - Drop zlib-1.2.7-improve-longest_match-performance.patch * not accepted by upstream for two releases * rebasing no longer possible * Sun Dec 04 2016 firstname.lastname@example.org - Include fixes for bnc#1003580 bnc#1003579 bnc#1003577 bnc#1013882: * zlib-bnc1003577.patch * zlib-bnc1003579-part2.patch * zlib-bnc1003579.patch * zlib-bnc1003580.patch refreshed * zlib-bnc1013882.patch CVE-2016-9843 * Thu Sep 24 2015 email@example.com - Trim descriptions to fit target audience. Update RPM group classification. * Mon Jul 13 2015 firstname.lastname@example.org - Require zlib-devel in zlib-devel-static to fix previous change * Tue Jun 30 2015 email@example.com - Bring back zlib-devel-static. Needed by binutils * Wed Jun 24 2015 firstname.lastname@example.org - Remove zlib-devel-static, nothing should use libz.a anyway. - Package minizip library, everything using it should now pull minizip-devel and unbundle it bnc#935864 * Thu Sep 25 2014 email@example.com - Install examples to cover another angle from bnc#890228 - Cleanup with spec-cleaner * Mon Jul 29 2013 firstname.lastname@example.org - zlib-format.patch, backport missing sle11 feature back to openSUSE bnc#831880 * Sat May 11 2013 email@example.com - Update to version 1.2.8 * Add new inflateGetDictionary() function * Fix bug where gzopen() immediately followed by gzclose() would write an empty file instead of an empty gzip stream. * Fix bug in gzclose() when gzwrite() runs out of memory * Tue Mar 05 2013 firstname.lastname@example.org - libz1-32bit obsoletes zlib-32bit <= 1.2.7 (fixes bnc#806310) * Sat Dec 15 2012 email@example.com - Add zlib-devel-static to baselibs.conf, needed for binutils testsuite - Migrate zlib-<targettype> to libz1-<targettype> * Thu Nov 22 2012 firstname.lastname@example.org - Replace %make_install by normal make install; the former is a constant source of agony in older or non-SUSE. * Mon Oct 22 2012 email@example.com - buildignore checks for now to get bootstrapping working * Mon Oct 15 2012 firstname.lastname@example.org - add longest_match performance patch (fate#314093) * suggested by IBM, sent upstream - rename the main library package to libz1 according Shared Library Policy - profiling build can be enabled via build --with profiling - use the human-readable package description from zlib.net - add rpmlintrc * Mon May 07 2012 email@example.com - Update to 1.2.7 * Fix bug in gzclose_w() when gzwrite() fails to allocate memory * Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen() * Add gzopen_w() in Windows for wide character path names * Fix type mismatch between get_crc_table() and crc_table - Passed the spec file through spec cleaner * Thu Feb 09 2012 firstname.lastname@example.org - Remove redundant tags/sections * Thu Dec 22 2011 email@example.com - use configure options for library paths. Also fixes the pkg-config file to not have /usr/local bnc#738169 * Wed Dec 07 2011 firstname.lastname@example.org - zlib has it's own spdx license, so use it :) * Sat Nov 19 2011 email@example.com - Do not include the codename in soversion. * Sat Nov 19 2011 firstname.lastname@example.org - This is zlib 184.108.40.206 codename "motley" - Fix bug and add consts in contrib/puff [Oberhumer] - Fix static-only-build install in Makefile.in - Add libz.a dependency to shared in Makefile.in for parallel builds - Spell out "number" (instead of "nb") in zlib.h for total_in, total_out - Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not - Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense - Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser) - Fix zlib.h LFS support when Z_PREFIX used - Avoid deflate sensitivity to volatile input data - Avoid division in adler32_combine for NO_DIVIDE - Clarify the use of Z_FINISH with deflateBound() amount of space - Use u4 type for crc_table to avoid conversion warnings - Apply casts in zlib.h to avoid conversion warnings - Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller] - Improve inflateSync() documentation to note indeterminancy - Add deflatePending() function to return the amount of pending output - Check that pointers fit in ints when gzprint() compiled old style - Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler] * Sun Nov 13 2011 email@example.com -open file descriptors with O_CLOEXEC but only in the· gzopen() case, not in gzdopen() as that would change the calling application' semantics. It is responsability of the caller to ensure O_CLOEXEC is used in such scenario. * Tue Oct 04 2011 firstname.lastname@example.org - cross-build fix: use %__cc macro (not %configure, this is not autoconf) * Fri Aug 26 2011 email@example.com - Use __attribute__ target in SSE optimized functions so the compiler defines __MMX__ __SSE__ etc, this probably only matters in 32 bit. what version to use is still determined at runtime by cpuid. * Mon Jun 27 2011 firstname.lastname@example.org - bnc#652333: Change LICENSE text to not have version, which changes too often and invalidates the text everytime. * Mon May 30 2011 email@example.com - Fix two bugs that will break ia64 systems only. * Fri May 27 2011 firstname.lastname@example.org - fix bnc#679345: zlib segfaults when passing NULL to gzopen * return NULL checks back to gz_open * Thu May 12 2011 email@example.com - Update SSE patches, fixes bugs in PPC implementation - X86 improvements. * Sat May 07 2011 firstname.lastname@example.org - Update SSE2/MMX patches to their current version. per request of the author. * This are integrated now,including support for a number of additional archs and fixes ARM patches bugs. * Mon Apr 18 2011 email@example.com - Update SSE2/MMX patches tp version 3 now with comments,performance numbers,and ia64 support * Wed Mar 30 2011 firstname.lastname@example.org - Update SSE2/MMX patches to version 2. * Tue Mar 15 2011 email@example.com - Add highly experimental patches to use SSE2/SSSE3/MMX in zlib this makes the library up to 6 times faster. * Sun Jan 09 2011 firstname.lastname@example.org - do not use compiler profile information, as the testsuite fails when using it. * Tue Dec 21 2010 email@example.com - Add dependency to make it build in a parallel world. * Tue Dec 07 2010 firstname.lastname@example.org - use compiler profile information to make libz slightly faster. * Tue Sep 21 2010 email@example.com - Simplified version of zlib-lfs.patch. Should also resolve issues arising with various combination of LFS derinfes. * Tue Sep 14 2010 firstname.lastname@example.org - Add zlib-lfs.patch: Fix Large File Support. Patch comes from the zlib-devel mailinglist: http://mail.madler.net/pipermail/zlib-devel_madler.net/2010-May/002303.html * Tue Aug 10 2010 email@example.com - Update to version 1.2.5: + fixes bugs in gzseek() and gzeof() - Changes from version 1.2.4: + Fixed bugs in adler32_combine(), compressBound(), and deflateBound() + Wholesale replacement of gz* functions with faster versions + As part of that, added gzbuffer(), gzoffset(), gzclose_r(), and gzclose_w() functions + Faster Z_HUFFMAN_ONLY and Z_RLE compression for images and other specialized compression + Added flush options Z_BLOCK to deflate() and Z_TREES to inflate() for finer control + Added inflateReset2() and inflateMark() functions, the latter to aid in random access applications + Added LFS (Large File Summit) support for 64-bit file offsets and many other portability improvements + Updated examples in examples/ and updated third-party contributions in contrib/ - Drop obsolete patches: + zlib-1.2.1-make-test.patch + zlib-1.2.1-vsnprintf.patch + zlib-1.2.1-CFLAGS.dif + zlib-1.2.3-686.patch + zlib-1.2.3-visibility-support.patch - Rebased zlib-1.2.2-format.patch - Clean spec file using spec-cleaner. - BuildRequire to have proper pkgconfig() provides. * Mon Jun 28 2010 firstname.lastname@example.org - use %_smp_mflags * Sat Dec 12 2009 email@example.com - add baselibs.conf as a source * Tue Nov 24 2009 firstname.lastname@example.org - refresh patches with fuzz=0 * Fri Apr 24 2009 email@example.com - added LICENSE file, for GPL licensed contrib files, however they are not used to build our zlib library (bnc#490107) - added zlib-1.2.3-686.patch - update license text (bnc#490107) * Sat Mar 21 2009 firstname.lastname@example.org - there is one valid use case of static zlib in "qemu" package split a -devel-static subpackage, please do not BuildRequire this package unless you are 100% sure you need it, if in doubt mail either the security team or me.
/usr/include/zconf.h /usr/include/zlib.h /usr/include/zutil.h /usr/lib64/libz.so /usr/lib64/pkgconfig/zlib.pc /usr/share/doc/packages/zlib /usr/share/doc/packages/zlib-devel /usr/share/doc/packages/zlib-devel/ChangeLog /usr/share/doc/packages/zlib-devel/README /usr/share/doc/packages/zlib/examples /usr/share/doc/packages/zlib/examples/README.examples /usr/share/doc/packages/zlib/examples/enough.c /usr/share/doc/packages/zlib/examples/fitblk.c /usr/share/doc/packages/zlib/examples/gun.c /usr/share/doc/packages/zlib/examples/gzappend.c /usr/share/doc/packages/zlib/examples/gzjoin.c /usr/share/doc/packages/zlib/examples/gzlog.c /usr/share/doc/packages/zlib/examples/gzlog.h /usr/share/doc/packages/zlib/examples/zlib_how.html /usr/share/doc/packages/zlib/examples/zpipe.c /usr/share/doc/packages/zlib/examples/zran.c /usr/share/man/man3/zlib.3.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Sat Apr 20 23:19:08 2019