|Index||index by Group||index by Distribution||index by Vendor||index by creation date||index by Name||Mirrors||Help||Search|
|Name: udev-configure-printer||Distribution: openSUSE 11.3|
|Version: 1.2.0||Vendor: openSUSE|
|Release: 2.5.1||Build date: Thu Dec 8 17:37:23 2011|
|Group: Hardware/Printing||Build host: build03|
|Size: 30389||Source RPM: system-config-printer-1.2.0-2.5.1.src.rpm|
|Summary: Utility to autoconfigure printers when plugged|
This package contains an utility that will ensure printers get automatically configured when plugged on the computer.
* Thu Dec 08 2011 email@example.com - Add system-config-printer-subprocess-no-shell.patch: avoid escaping issues when running commands. Fix bnc#735322. * Tue Dec 06 2011 firstname.lastname@example.org - Add system-config-printer-no-openprinting.patch: this disables the feature where PPD drivers can be downloaded from OpenPrinting.org. See discussion in bnc#733542. As a side-effect, this fixes CVE-2011-4405. * Thu Mar 18 2010 email@example.com - Update to version 1.2.0: + The my-default-printer application has been removed. + Printer drivers are automatically installed when possible. + The basic/advanced server settings dialogs have been merged. + PPDs are now fetched asynchronously. + The job viewer has seen many improvements. + Updated translations. - remove fixme regarding polkit-1: current configure would not even know about it. - Rebase system-config-printer-icon-brp-friendly.patch to apply without fuzz. * Sat Feb 27 2010 firstname.lastname@example.org - Update to version 1.1.93: + Display a warning when the wrong IEEE 1284 ID is detected + rh#566938: catch RuntimeError in statereason.py when cupsGetPPD2 fails + Removed HP and Kyocera IEEE 1284 Device ID hacks + Increased new printer notification timeout to 20 minutes. + Added simple program to check IEEE 1284 Device IDs against PPDs + Update translations. * Sun Feb 21 2010 email@example.com - Update to version 1.1.92: + system-config-printer: - Use stock 'add' icon for new-printer button (lp#394071) - Use gtk.STOCK_ instead of gtk- throughout - Avoid clearing selecting device settings when adding a printer - Update the PolicyKit code to use the correct signature for DeviceGet - ppsloader: avoid traceback - Set timeout for InstallPrinterDrivers D-Bus call + Updated translations. * Wed Feb 10 2010 firstname.lastname@example.org - Update to version 1.1.91: + system-config-printer: - Make it obvious when a printer is disabled. - Update 'Time submitted' column when clicking Refresh in job viewer. - Fixed traceback when renaming a printer. - Fixed async pycups fallback again. - Fixed statereason localization for raw queues (rh#558156). - Set model for LPD queue ComboEntry. - Only add current device to list when all devices found (rh#558524). - When retrying authentication as another user, forbid PolicyKit. - Use tooltips in jobs treeview. - Avoid non-zero page sizes in SpinButton adjustments. - Only show jobs for selected printers in job viewer. - Better error handling when renaming a printer (rh#561182). - Troubleshooter checks local SELinux file contexts. - Fixed drop-down list for connection dialog. - Avoid crash filling makes list when no make detected (rh#562520). - Fixed automatic driver assignment via applet. - Minor bugfixes and HIG fixes. + Updated translations. * Wed Jan 20 2010 email@example.com - Update to version 1.1.90: + system-config-printer: - Parse foomatic's special DRV Device ID field (rh#550108). - Driver selection fixes (rh#550075). - Remove my-default-printer application. - Handle cancelJob's optional purge_job parameter in PolicyKit1 backend. - Changed 'Clear job' to 'Delete job'. - Make sure the printer we added still exists before selecting it (rh#551436). - Set notification timeouts appropriately (rh#550829). - "Copy" action in context menu is now called "Duplicate". - Make sure there are enough ink level values (rh#541882). - Reinstated job completion notifications with better text. - Remove job attributes viewer tabs for jobs that have been purged. - Use asyncconn for canceling/deleting jobs. - Ability to retrieve job files which have been preserved. - Set D-Bus timeout when calling asynchronously. - Restore option values for serial device. - Fixed window modality and transience. - PrinterDriversInstaller implementation: this is a system bus service to install drivers via PackageKit. - Use asyncconn to fetch PPDs. - Don't rely on cups-pk-helper being around (rh#556170). - Make sure serial device widgets are always initialized (rh#556488). - Clean up temporary files when localizing statereason (rh#552768). - Removed support for installing HP's proprietary plug-in. - Fix various tracebacks (rh#550442, rh#550437, rh#553141, rh#554372, rh#554268, rh#555552). - Avoid leaking resources. - Code cleanups. - Updated translations. + udev-configure-printer/udev-add-printer: - avoid traceback when no CMD field present. - try to install drivers first. - Update system-config-printer-icon-brp-friendly.patch after my-default-printer removal. - Remove system-config-printer-hide-my-default-printer.patch: my-default-printer was removed. * Wed Dec 23 2009 firstname.lastname@example.org - Update to version 1.1.16: + system-config-printer: - Don't fail if smbc module is not available. - Don't overwrite BrowsePoll settings with basic settings dialog (rh #543986). - Fixed cupsd.conf parsing when lines begin with blanks (rh#544003). - Constraints handling fix. - Clear device screen each time a new dialog is presented. - Prefer Foomatic/hpijs to hpcups for the time being. - Rearchitecture code for more asynchronous code, and use it to fetch the device list in a safe way. - Adapted to new pycups API for cupsSetPasswordCB2. - Ignore com.apple.print.recoverable state reason. - Fix various tracebacks. + Updated translations. * Wed Dec 16 2009 email@example.com - Update to version 1.1.15: + system-config-printer: - Fix a traceback. - Don't update properties if apply failed (rh#542503). - Changes from version 1.1.14: + system-config-printer: - Avoid unnecessary "publish printers" dialog. - Translate job-hold-until and retry-current-job values. - Attempt to discover whether the firewall needs adjusting. - Iconify jobs window into status icon. - Handle hpcups driver for 5400 series in test suite. - Added SMB support to 'Find Network Printer'. - Fixed device fetch when not using polkit-1. - Cancel PrinterFinder when new-printer dialog closes. - Added IPP and JetDirect support to 'Find Network Printer'. - Use the correct URI for probed CUPS queues. - Better order for network printer probes. - Use make-and-model to guess the PPD driver for a discovered printer, if no device ID is available. - Improve default name of printer, when the name already exists. - Auto-select raw queue correctly when changing PPD. - Attempt to determine make and model of network printers (rh#524321). - Don't display properties dialog for first test page (lp#444280). - Fixed visibility tracking for jobs window. - Strip 'zjs', 'zxs', 'pcl3' from make-and-model (rh#531048). - Added support for custom state reasons. - Catch IPP errors when updating from notified events (rh#530641). - Fail nicely if new printer is deleted during test page prompt (rh#533109). - Suggest installing foomatic-db-ppds when appropriate. - Install the foomatic package if foomatic-rip is missing. - Retry when reconnection (due to authentication) fails (rh#541741). - Various small bug and UI fixes. - Various code improvements. - Fix various tracebacks. + udev-configure-printer/udev-add-printer: - Build system fixes. * Sat Oct 10 2009 firstname.lastname@example.org - Update to version 1.1.13: + system-config-printer: - Use correct statereason level icon names. - Handle icon load failure gracefully. - Fix cleaning of TurboPrint PPD listings of CUPS 1.4.x. - Avoid error dialog after cancelling operation via PolicyKit dialog. - Fetch devices in a separate thread to avoid blocking (lp#516787). - Add polkit-1 support, and make it conditional on "configure - -with-polkit-1". - Fixed traceback with older versions of GTK+. - Fixed proxy authentication. - Allow PPD/device changes for raw queues. - Extended TimedOperation class to allow callbacks - Fixed cupspk support for DevicesGet - Allow parameters to cupshelpers.getDevices - Allow for more than one spinner task - Use callbacks when fetching devices - Fixed spinner UI bug - Fixed cancellation in TimedOperation class - Fetch network devices as soon as local devices are received - Make sure to cancel the fetchDevices callback when not needed + Updated translations. - Rebase system-config-printer-firewall-menu.patch to apply with fuzz=0. * Wed Aug 26 2009 email@example.com - Update to version 1.1.12: + system-config-printer: - Don't get tripped up by "-" when checking for missing executables. - HP's Bluetooth printers return a model name with added "_BT" in their device ID. - Added support for localized marker names - Fixed parenting of WaitWindow when adding printer. - Don't attempt to use PolicyKit if we are root. - Support for cups-pk-helper's DevicesGet method. - Use modern gtk tooltip support. - Fixed typo handling exceptions from AdvancedServerSettingsDialog. - Use set_default_size instead of setting width and height properties. - Fixed missing treeview update in properties dialog. - Fixed identification of CUPS native gutenprint drivers. - Prefer native CUPS drivers to foomatic drivers. - Busy/ready cursor handling fixes. - Use separate thread for verifying IPP queue. - Set an appropriate status icon tooltip when configuring printer. - Fixed cupspk handling of disabling a printer. - Show a 'paused' emblem for disabled printers. - Use preferred object path for AuthenticationAgent. - Kill job creation times timer on the jobviewer is destroyed. - Only update job creation times once per minute at rest. - Job status icon and state reason in jobs treeview. - Show rejecting printers as insensitive. - Added experimental package tagging for PPD files. - Removed notification when job has completed. - Fixed applet traceback when printing test page. - Don't allow Back/Forward to lose troubleshooting diagnostic information. - Code cleanups. + udev-configure-printer/udev-add-printer: - Compare MFG and MDL case-insensitively. + Updated translations. * Sat Aug 08 2009 firstname.lastname@example.org - Update to version 1.1.11: + udev-configure-printer/udev-add-printer: - don't add fax queue if already present - don't fork if DEBUG environment variable set - Enable/disable queues with paired device URIs - use '/' as delimiter when examining device URI - make sure we don't configure the same printer twice - Don't set USB configuration in udev-configure-printer - Serialize CUPS-Get-Devices requests - Exit early in udev-configure-printer if device already mapped to URIs - don't require pycups 1.9.46 just yet - Fixed name uniqueness checking - Notify the correct printer name - create fax queues using prefix of printer queue - fixed duplicate devpath check - fixed removal when cupsd not running + system-config-printer: - Use case-insensitive matching when cleaning up the PPD nick names to get the model names for the make/model/driver list - Made extracting make and model from the NickName of TurboPrint PPDs working again - Made the field for freely typing in an URI actually work - Better method of determining current device URI - Printer icon should not show 'printing' when job stopped - Updates for hplip 3.9.6 - Let the checks for adding a device to a physicaldevice object parse HPLIP URIs correctly to extract the host name/IP from them - jobviewer: notice jobs that have stopped due to backend errors - Fixed cupspk's implementation of adminGetServerSettings() - A warning is given that renaming destroys print job history - Small improvements for printer rename confirmation - API improvement in cupshelpers: limit job fetches - troubleshoot: treat http and https schemes as potential CUPS servers - Make properties dialog OK button insensitive when no changes - Validate BrowsePoll entries + Code cleanups and plug leaks. + Updated translations. * Wed Aug 05 2009 email@example.com - Fix build on 11.1 and earlier: we don't want the udev helpers there. * Thu Jul 23 2009 firstname.lastname@example.org - Update to version 1.1.10: + Support for HPLIP 3.9.6. + Fixed 'location' field for printers added remotely. + Avoid traceback when adding new printer. + Parse nmblookup failures correctly. + Avoid non-fatal traceback when adding IPP printer. + Make sure we find https URIs from https backend. + Prevent traceback on IPP notification after properties dialog cancelled. + Fixed incorrect authentication in the troubleshooter. + Arrows for adding and removing class members are sensitive only if something is selected. + Small fix for class members arrows: always de-sensitise buttons after use. + Another fix for selecting an added printer. + Spot stopped jobs with CUPS 1.4 as well. + Map gutenprint filenames to the package name. + Use gpk-install-package-name to install packages, not the PK D-Bus API. + Always update the jobviewer status icon on job events. + Fixed UI oddities when changing PPD/device. + Avoid possible traceback when receiving printer-added-events. + Fixed initial radio button selection for SMB authentication. + Make sure to URL-encode usernames and passwords correctly. + Don't run Properties dialog on new printer. + Don't mention the job number in completed jobs notification. + Check exit codes for child processes. + Removed IPP browser. + Improved matching of printer model names. + Added PIXMA comment to test suite. + Efficiency fixes for PPDs Device ID matching. + Fixed --debug option for PPDs self-test function. + Efficiency and readability improvements in PPDs Device ID matcher. + Avoid cups.setServer/setPort. + Fixed incorrect "printer not shared on server" message. + Drop libsexy support in favour of GTK+ 2.17's equivalent. + Avoid reloading all PPDs when calls to jockey fail. + Small speed-up (0.09s) for the case where jockey is not present. + Don't reload all PPDs if the query has already finished. + 75% speed improvement in ppdMakeModelSplit(). + New udev-based queue configuration system. + Improve window size. + Fixed hang on start-up when trying to resize the window. + Fixed tracebacks in cupshelpers.ppds test suite. + Fixed Device ID matching for HPLIP PPDs. + Updated translations. - Add cups-devel, libudev-devel, libusb-compat-devel BuildRequires. - Pass --with-udev-rules to configure. - Package the udev helpers in udev-configure-printer. This package Obsoletes cups-autoconfig, since the new udev helpers now do this job. - Split cupshelpers python module in python-cupshelpers package since it's needed by udev-configure-printer. - Drop system-config-printer-cups-autoconfig-notifications.patch: we will now use the udev tool and we will receive notifications without this patch. * Mon Jul 20 2009 email@example.com - Update to version 1.1.8 (this is not a complete list of changes since upstream uses git, but some changes aren't listed in ChangeLog): + Set relaxed PPD conformance + Fixed URI parsing when verifying IPP URIs + Set glade's textdomain in the jobviewer (lp#341765) + Made hp-plugin call also working with HPLIP 3.9.2 + Adjusted border padding for New Printer window + Use ValueError in PhysicalDevice to indicate device is different + Import debugprint in cupspk + Fixes on automatic printer model selection and suggestion of queue name + Style and efficiency improvements + Fixed XmlHelper crash on invalid XML file (lp#370469) + Clean up temporary PPD files when we're finished with them + Reconnect to CUPS if the connection gets lost during the installation of a driver from OpenPrinting + Scroll to new job if it was added just above the visible range + Use grey ink-drop when there is no marker-colors value + Fixed conversion from broken-down UTC time to simple UNIX time for held jobs + Track printer state changes for the printer context menu + Removed some stale code in cupshelpers + Make sure the job context menu cannot get out of date + Select a newly-added printer + Make troubleshooter work again by disabling cupspk for it * Wed Apr 15 2009 firstname.lastname@example.org - Update to version 1.1.7 (this is not a complete list of changes since upstream uses git, but some changes aren't listed in ChangeLog): + Prevent some tracebacks + Various improvements for printer model identification + Added support for https device URIs showing the IPP screen + Efficiency fixes + Do not use setlocale() for locale-independent uppercase/lowercase conversion + jobviewer: don't abort if we couldn't show a notification * Sat Mar 14 2009 email@example.com - Update to version 1.1.6 (this is not a complete list of changes since upstream uses git, but some changes aren't listed in ChangeLog): + Use setlocale() to save current LC_CTYPE value, not getlocale() + Don't try search for a model series if there are no digits in the model name + Adapted D-Bus policy file to the new D-Bus defaults + Better PPD fallback searching. + Strip " hpijs" from PPD names. * Fri Mar 06 2009 firstname.lastname@example.org - Update to version 1.1.5 (this is not a complete list of changes since upstream uses git, but some changes aren't listed in ChangeLog): + UI improvements in the new printer dialog. + Include local printer attributes in diagnostic output. - Drop system-config-printer-bnc456110-non-blocking-probe.patch: fixed upstream. - Drop system-config-printer-fix-add-printer-git051bc7f0.patch: fixed upstream.
/lib/udev /lib/udev/rules.d /lib/udev/rules.d/70-printers.rules /lib/udev/udev-add-printer /lib/udev/udev-configure-printer
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Dec 10 07:59:46 2013